Schneider Electric TeSys Deca Contactor LC1D25AP7

Main Specifications

Range of product: TeSys Deca

Product or component type: Contactor

Device short name: LC1D

Contactor application: Motor control

Utilisation category: AC-1, AC-3, AC-3e, AC-4

Poles description: 3P (3 NO)

Rated operational voltage [Ue]: Power circuit: ≤ 690 V AC 25...400 Hz; Power circuit: ≤ 300 V DC

Rated operational current [le]: 25 A (at ≤ 60 °C) at ≤ 440 V AC-3 for power circuit; 25 A (at ≤ 60 °C) at ≤ 440 V AC-3e for power circuit; 40 A (at ≤ 60 °C) at ≤ 440 V AC-1 for power circuit

Control circuit voltage [Uc]: 230 V AC 50/60 Hz

Complementary Specifications

Motor power kW: 5.5 kW at 220...230 V AC 50/60 Hz (AC-3); 11 kW at 380...400 V AC 50/60 Hz (AC-3); 11 kW at 415...440 V AC 50/60 Hz (AC-3); 15 kW at 500 V AC 50/60 Hz (AC-3); 15 kW at 660...690 V AC 50/60 Hz (AC-3); 5.5 kW at 400 V AC 50/60 Hz (AC-4); 5.5 kW at 220...230 V AC 50/60 Hz (AC-3e); 11 kW at 380...400 V AC 50/60 Hz (AC-3e); 11 kW at 415...440 V AC 50/60 Hz (AC-3e); 15 kW at 500 V AC 50/60 Hz (AC-3e); 15 kW at 660...690 V AC 50/60 Hz (AC-3e)

Compatibility code: LC1D

Pole contact composition: 3 NO

Protective cover: With

Conventional free air thermal current [Ith]: 40 A (at 60 °C) for power circuit; 10 A (at 60 °C) for signalling circuit

Irms rated making capacity: 450 A at 440 V for power circuit conforming to IEC 60947; 140 A AC for signalling circuit conforming to IEC 60947-5-1; 250 A DC for signalling circuit conforming to IEC 60947-5-1

Rated breaking capacity: 450 A at 440 V for power circuit conforming to IEC 60947

Rated short-time withstand current [Icw]: 240 A 40 °C - 10 s for power circuit; 380 A 40 °C - 1 s for power circuit; 50 A 40 °C -10 min for power circuit; 120 A 40 °C - 1 min for power circuit; 100 A - 1 s for signalling circuit; 120 A - 500 ms for signalling circuit; 140 A - 100 ms for signalling circuit

Associated fuse rating: 10 A gG for signalling circuit conforming to IEC 60947-5-1; 63 A gG at ≤ 690 V coordination type 1 for power circuit; 40 A gG at ≤ 690 V coordination type 2 for power circuit

Average impedance: 2 mΩ - Ith 40 A 50 Hz for power circuit

Power dissipation per pole: 1.25 W AC-3; 1.25 W AC-3e; 3.2 W AC-1

Rated insulation voltage [Ui]: Power circuit: 690 V conforming to IEC 60947-4-1; Signalling circuit: 690 V conforming to IEC 60947-1

Overvoltage category: III

Pollution degree: 3

Rated impulse withstand voltage [Uimp]: 6 kV conforming to IEC 60947

Safety reliability level: B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1

Mechanical durability: 15 Mcycles

Electrical durability: 1.4 Mcycles 40 A AC-1 at Ue ≤ 440 V; 1.65 Mcycles 25 A AC-3 at Ue ≤ 440 V; 1.65 Mcycles 25 A AC-3e at Ue ≤ 440 V

Control circuit type: AC at 50/60 Hz standard

Coil technology: Without built-in suppressor module

Control circuit voltage limits: 0.3...0.6 Uc (drop-out AC 50/60 Hz); 0.8...1.1 Uc (operational AC 50 Hz); 0.85...1.1 Uc (operational AC 60 Hz); 1...1.1 Uc (operational AC 50/60 Hz)

Inrush power in VA: 70 VA 60 Hz cos φ 0.75 (at 20 °C); 70 VA 50 Hz cos φ 0.75 (at 20 °C)

Hold-in power consumption in VA: 7.5 VA 60 Hz cos φ 0.3 (at 20 °C); 7 VA 50 Hz cos φ 0.3 (at 20 °C)

Heat dissipation: 2...3 W at 50/60 Hz

Operating time: 12...22 ms closing; 4...19 ms opening

Maximum operating rate: 3600 cyc/h at 60 °C

Connections - Terminals

Control circuit: snap-in terminal 1 0.5...4 mm² - flexible without cable end; snap-in terminal 2 0.5...4 mm² - flexible without cable end; snap-in terminal 1 0.5...2.5 mm² - flexible with cable end; snap-in terminal 2 0.5...2.5 mm² - flexible with cable end; snap-in terminal 1 0.5...2.5 mm² - solid without cable end; snap-in terminal 2 0.5...2.5 mm² - solid without cable end

Power circuit: snap-in terminal 1 0.75...6 mm² - flexible without cable end; snap-in terminal 2 0.75...6 mm² - flexible without cable end; snap-in terminal 1 0.75...4 mm² - flexible with cable end; snap-in terminal 2 0.75...4 mm² - flexible with cable end; snap-in terminal 1 0.75...4 mm² - solid without cable end; snap-in terminal 2 0.75...4 mm² - solid without cable end

Auxiliary contact composition: 1 NO + 1 NC

Auxiliary contacts type: type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1; type mirror contact 1 NC conforming to IEC 60947-4-1

Signalling circuit frequency: 25...400 Hz

Minimum switching voltage: 17 V for signalling circuit

Minimum switching current: 5 mA for signalling circuit

Insulation resistance: > 10 MOhm for signalling circuit

Non-overlap time: 1.5 ms on de-energisation between NC and NO contact; 1.5 ms on energisation between NC and NO contact

Mounting support: Plate, Rail

Environment

Standards: EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, IEC 60335-1:Clause 30.2, IEC 60335-2-40:Annex JJ

Product certifications: CB Scheme, CCC

IP degree of protection: IP20 front face conforming to IEC 60529

Protective treatment: TH conforming to IEC 60068-2-30

Climatic withstand: conforming to IACS E10 exposure to damp heat; conforming to IEC 60947 Annex Q category D exposure to damp heat

Permissible ambient air temperature around the device: -40...60 °C; 60...70 °C with derating

Operating altitude: 0...3000 m

Fire resistance: 850 °C conforming to IEC 60695-2-1

Mechanical robustness: Vibrations contactor open (2 Gn, 5...300 Hz); Vibrations contactor closed (4 Gn, 5...300 Hz); Shocks contactor closed (15 Gn for 11 ms); Shocks contactor open (8 Gn for 11 ms)

Height: 110 mm

Width: 45 mm

Depth: 92 mm

Product weight: 454 g

Packing Units

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 5 cm

Package 1 Width: 10.5 cm

Package 1 Length: 11.5 cm

Package 1 Weight: 474 g

Unit Type of Package 2: S02

Number of Units in Package 2: 15

Package 2 Height: 15 cm

Package 2 Width: 30 cm

Package 2 Length: 40 cm

Package 2 Weight: 7.425 kg

Unit Type of Package 3: P06

Number of Units in Package 3: 240

Package 3 Height: 75 cm

Package 3 Width: 60 cm

Package 3 Length: 80 cm

Package 3 Weight: 127.3 kg

Environmental Data

Schneider Electric aims to achieve Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity via our ongoing "Use Better, Use Longer, Use Again" campaign to extend product lifetimes and recyclability.

Environmental footprint: Carbon footprint (kg.eq.CO2 per CR, Total Life cycle): 126

Materials and Substances: Packaging made with recycled cardboard: Yes; Packaging without single use plastic: Yes

EU RoHS Directive: Compliant

REACH Regulation: REACH Declaration

California proposition 65: WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Repack and remanufacture: Circularity Profile: End of Life Information; Take-back: No

Technical Illustration

Assembly's dimensions:

Height: 110 mm [4.3 in]

Width: 45 mm [1.8 in]

Depth: 92 mm [3.6 in]