ZLINE DWV-18 and DWV-24 Dishwasher Panel & Kickplate Dimensions
ZLINE DWV-18 Front Panel & Kickplate Dimensions
The following diagrams illustrate the dimensions for the ZLINE DWV-18 dishwasher's front panel and kickplate.
Front Panel Dimensions (DWV-18)
Width: 17 9/16 inches (446.1 mm)
Height: 25 1/2 inches (647.7 mm)
Details:
- Hole for magnet mounting: 3 3/4 inches (96 mm) from the top edge.
- Center of hole: 13 7/8 inches (352.4 mm) from the left edge.
Kickplate Dimensions (DWV-18)
Width: 17 5/8 inches (447.7 mm)
Height: 2 9/16 inches (65 mm)
Details:
- Hole diameter: Ø1 inch (Ø25.4 mm)
- Hole position from the left edge: 7/16 inches (10.7 mm)
- Hole position from the bottom edge: 2 3/4 inches (69.9 mm)
- Another dimension indicated as 5 7/16 inches (138.1 mm) appears to relate to the kickplate's depth or a specific mounting point.
ZLINE DWV-24 Front Panel & Kickplate Dimensions
The following diagrams illustrate the dimensions for the ZLINE DWV-24 dishwasher's front panel and kickplate.
Front Panel Dimensions (DWV-24)
Width: 23 7/16 inches (596 mm)
Height: 29 1/2 inches (750 mm)
Details:
- Hole for magnet mounting: 3 3/4 inches (96 mm) from the top edge.
- Center of hole: 16 3/8 inches (416 mm) from the left edge.
Kickplate Dimensions (DWV-24)
Width: 23 9/16 inches (598 mm)
Height: 2 9/16 inches (65 mm)
Details:
- Hole diameter: Ø1 inch (Ø25 mm)
- Hole position from the left edge: 7/16 inches (10.7 mm)
- Hole position from the bottom edge: 4 inches (101 mm)
- Another dimension indicated as 2 inches (50.5 mm) appears to relate to the kickplate's depth or a specific mounting point.
ZLINE DWV-24 Back Panel & Kickplate Dimensions
The following diagrams illustrate the dimensions for the ZLINE DWV-24 dishwasher's back panel and kickplate.
Back Panel Dimensions (DWV-24)
Width: 23 9/16 inches (598 mm)
Height: 29 1/4 inches (743 mm)
Details:
- Section B-B shows a width of 19 13/16 inches (504 mm) for a specific internal component or cutout.
- Various screw hole locations are indicated with measurements:
- (m) Screws 5/32" x 19/32"
- (i) Screws 5/32" x 1 5/8"
- Specific mounting hole dimensions and positions are detailed, including Ø1/4" (Ø6.5 mm) holes at 4 15/16" (126 mm) and 3 5/8" (92 mm) from edges.
- Other holes are located at 21 3/16" (538 mm), 22 5/16" (567 mm), and 16 7/8" (428 mm) from various edges.
- Section C shows a width of 9/16" (15 mm) and a thickness of 3/16" (5 mm).
- Section A-A shows a width of 13/16" (5 mm) and a thickness of 1/16" (1 mm).
Kickplate Dimensions (DWV-24)
Width: 23 9/16 inches (598 mm)
Height: 2 inches (50.5 mm)
Details:
- Hole diameter: Ø1 inch (Ø25 mm)
- Hole position from the left edge: 7/16 inches (10.7 mm)
- Hole position from the bottom edge: 4 inches (101 mm)
