ZLINE DWV-18 & DWV-24 Dishwasher Panel and Kickplate Dimensions
Information regarding the dimensions for ZLINE dishwasher models DWV-18 and DWV-24, including front panel, kickplate, and back panel specifications.
ZLINE DWV-18
Front Panel & Kickplate Dimensions
Overall Width: 17 9/16 inches
Overall Height: 11 16 inches
Kickplate Height: 3 3/4 inches
Mounting Hole Spacing: 13 7/8 inches
Kickplate Dimensions:
- Width: 17 5/8 inches
- Height: 2 9/16 inches
- Magnet Mounting Position: Hole diameter 1 inch
ZLINE DWV-24
Front Panel & Kickplate Dimensions
Overall Width: 23 1/2 inches
Overall Height: 11 16 inches
Kickplate Height: 3 3/4 inches
Mounting Hole Spacing: 16 3/8 inches
Kickplate Dimensions:
- Width: 23 9/16 inches
- Height: 2 9/16 inches
- Magnet Mounting Position: Hole diameter 1 inch
ZLINE DWV-24 Back Panel & Kickplate Dimensions
Screws Required:
- (m): Screws Ø 5/32" x 27/32"
- (i): Screws Ø 5/32" x 53/32"
Back Panel Dimensions:
- Overall Width: 19 13/16 inches
- Overall Height: 26 3/4 inches
- Cutout Width: 22 5/16 inches
- Cutout Height: 16 7/8 inches
- Inner Cutout Width: 21 3/16 inches
- Inner Cutout Height: 15 3/16 inches
- Top Edge Thickness: 3/16 inches
- Side Edge Thickness: 11/16 inches
- Bottom Edge Thickness: 13/16 inches
- Mounting Hole Positions (from top edge):
- Left Hole Center: 4 15/16 inches
- Right Hole Center: 3 5/8 inches
- Mounting Hole Diameter: Ø5/16 inches
Kickplate Dimensions (for Back Panel):
- Width: 23 9/16 inches
- Height: 5 7/16 inches
- Thickness: 7/16 inches
- Magnet Mounting Position: Hole diameter 1 inch
- Magnet Mounting Position (from right edge): 2 11/16 inches
- Magnet Mounting Position (from bottom edge): 2 9/16 inches
Section B-B Detail:
- Width: 18 3/8 inches
- Hole Diameter: Ø5/16 inches
- Hole Diameter: Ø1/4 inches
Section C Detail:
- Hole Diameter: Ø1/4 inches
- Hole Diameter: Ø1/4 inches
Section A-A Detail:
- Thickness: 1/16 inches
- Thickness: 13/16 inches
