ZLINE Column Refrigeration Panel Templates
RBCFV-24 & RBCRV-24 Models
This document outlines the specifications for creating custom panels for ZLINE RBCFV-24 and RBCRV-24 column refrigeration units. Ensure all measurements are accurate before proceeding with panel fabrication.
Overall Width: 47 1/4" (1200 mm)
Overall Height: 79 15/16" (2030 mm)
Recommended Door Thickness:
- Minimum: 3/4" (19 mm)
- Maximum for Flush Inset: 15/16" (24 mm)
Top Edge Margin: 7 1/4" (185 mm)
Side Edge Margin (Each Side): 67/16" (164 mm)
Bottom Edge Margin: 273/16" (690.5 mm)
Top cutout width: 24 1/16" (610.5 mm)
Top cutout height: 23/16" (55.5 mm)
Side cutout width: 11/16" (18 mm)
Side cutout height: 11/16" (27.2 mm)
Bottom cutout width: 23/16" (55.5 mm)
Bottom cutout height: 17/8" (47 mm)
Deep inset dimension: 7/16" (11.1 mm)
Wide inset dimension: 11/16" (27.2 mm)
Refer to official ZLINE documentation for detailed installation instructions and panel-ready specifications.
