Front of Panel Dimensions
This section details the dimensions for the front of the ZLINE DPMT-24 panel.
| Width | 23 7/8 in. |
| Height | 29 1/2 in. |
| Top Edge Measurement (from left) | 11 1/16 in. |
| Hole Position (from top edge) | 3 7/8 in. |
| Hole Position (from left edge) | 16 3/8 in. |
| Bottom Edge Measurement (from left) | 23 13/16 in. |
| Side Edge Measurement (from top) | 29 1/2 in. |
Kickplate Dimensions (Front)
Dimensions for the kickplate as viewed from the front.
| Width | 23 13/16 in. |
| Height | 4 in. |
Note: Indicates mounting position of the magnet.
Back of Panel Dimensions
This section details the dimensions for the back of the ZLINE DPMT-24 panel.
| Width | 23 7/8 in. (606 mm) |
| Height | 29 3/16 in. (742 mm) |
| Feature | Dimension (Inches) | Dimension (Millimeters) |
|---|---|---|
| Cutout Width | 11 5/16 in. | 288 mm |
| Cutout Height | 14 5/16 in. | 363 mm |
| Reference Line A-A | 16 3/8 in. | 416 mm |
| Reference Line B-B | 9 1/16 in. | 231 mm |
| Hole Diameter (small) | ø 1/8 in. | 2.5 mm |
| Hole Diameter (large) | ø 3/8 in. | 10 mm |
| Cutout Offset from Top Edge | 1/2 in. | 12.3 mm |
| Cutout Offset from Left Edge | 7 7/16 in. | 189.5 mm |
| Main Panel Width Measurement | 21 11/16 in. | 550.7 mm |
| Main Panel Height Measurement | 14 5/16 in. | 363 mm |
Kickplate Dimensions (Back)
Dimensions for the kickplate as viewed from the back, including hole details.
| Width | 23 13/16 in. (605 mm) |
| Height | 4 in. (101.4 mm) |
| Hole Diameter | ø 1 in. |
| Hole Position (from side edge) | 2 9/16 in. (65 mm) |
*Note: Magnets are not included.
