ZLINE RBCRV-30 Column Refrigerator Custom Panel Installation
Information for installing custom panels on ZLINE RBCRV-30 models.
Panel Dimensions and Guidelines
This guide provides the necessary dimensions for creating and installing custom panels for the ZLINE RBCRV-30 Column Refrigerator. Proper adherence to these measurements ensures a seamless fit and a professional appearance.
Recommended Door Thickness:
- Minimum: 3/4" (19 mm)
- Maximum for Flush Inset: 15/16" (24 mm)
Door Height: 79 15/16" (2030 mm)
The following diagrams illustrate the key measurements for panel placement and dimensions:
Top View Measurements:
Width: 24 1/16" (610.5 mm)
Side Margin (each side): 11/16" (27.2 mm)
Top Margin: 7 1/4" (185 mm)
Bottom Margin: 1 7/8" (47 mm)
Side View Measurements:
Overall Depth: 2 1/4" (58 mm)
Panel Depth Consideration: The panel depth will depend on the chosen door thickness and the desired inset. The provided dimensions indicate the space available for the panel.
Key Measurement Points (Illustrative):
- Top Edge to Mounting Point: 65/16" (160 mm)
- Side Edge to Mounting Point: 11/16" (27.2 mm)
- Overall Width: 27 3/16" (690.5 mm)
Important Notes:
- Ensure all measurements are taken accurately before cutting custom panels.
- Refer to the ZLINE website for downloadable templates for precise panel creation.
