IMPORTANT INFORMATION!

Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference.

AVOID SCRATCHES!

In order to avoid scratching, this furniture should be assembled on a soft layer, such as a rug.

IMPROVE EFFICIENCY!

Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.

ANTI-TOPPLE WARNING!

Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase a wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.

IMPORTANT!

It is important that any product assembled using screws is re-tightened 2 weeks after assembly, and then every 3 months, to ensure stability throughout the product's lifespan.

For regular maintenance and cleaning: For the frame, use a rag dipped in neutral detergent, wipe thoroughly, and then dry with a clean rag. For glass materials, wipe with a rag dampened with glass cleaner, and then dry with a dry rag.

Do not use an electric screwdriver, and do not use excessive force when installing, as the board is easy to break.

Tools and Parts Identification

Please prepare the following tools:

• Screwdriver
• Drill
• Hammer
• Screwdriver with cross head

When installing, please carefully confirm whether each screw corresponds to the manual. Accessories with similar shapes can be distinguished by size.

Parts List:

• A x 12: M6 x 30 mm screws
• B x 16: M6 x 15 mm screws
• C x 22: M5 x 10 mm screws
• D x 4: M3 x 6 mm screws
• E x 2: Component E
• F x 8: M4 x 12 mm screws
• G x 2: M4 x 40 mm screws
• H x 16: M5 x 40 mm screws
• I x 1: 3 mm component
• J x 9: Dowels J
• K x 4: M5 x 30 mm screws
• L x 2: M4 x 40 mm screws
• M x 12: M6 x 30 mm screws
• N x 4: M6 feet
• O x 2: Ø6 x 30 mm components
• P x 1: LED strip P
• Q x 1: Magnet holder Q
• R x 4: M6 x 15 mm components
• S x 4: M6 x 15 mm components

Assembly Overview

The assembled unit will be a multi-shelf cabinet.

Assembly requires 2 adults.

Installation Steps

Step 1: Attach Magnet Holder

Attach part Q to part #8 using screw C. Then, attach part E to part Q using screw D, as shown. The magnet is directed towards the arrow.

Step 2: Attach Side Panels to Top Plate

Attach parts #8 and #9 to the #1 top plate using screws K, as shown. ⚠️ Slow down on the screws.

Step 3: Secure Frame Sides

Secure parts #6 and #7 to the top plate using screws A, as shown. ⚠️ Please do not tighten the screws yet.

Step 4: Attach Backplates

First, attach the #3 backplate and secure it with screw H. Then, link the #4 backplate and #5 backplate using dowels J, and finally secure them with screw H, as shown in the figure. After screwing in the screws, assemble the next board. ⚠️ Please do not tighten the screws yet.

Step 5: Attach Feet

Attach the four N feet to the furniture, as shown.

Step 6: Attach Base Plate Components

Attach parts #10 and #11 to the #2 base plate using screws F, as shown.

Step 7: Attach Magnet to Base

Attach magnet E to part #10 using screw D, as shown.

Step 8: Attach Side Supports

Fasten the 4 iron pieces S to the sides of the cabinet using screws A and screws B, as shown. ⚠️ Please do not tighten the screws yet.

Step 9: Attach Front/Back Supports

Attach the 4 iron pieces R to the front and back of the cabinet using screws B, as shown. ⚠️ Please do not tighten the screws yet.

Step 10: Insert Shelf Supports

Insert part M into the iron pipe on both sides and place shelf #12 onto part M, as shown.

Step 11: Attach Doors

Secure both doors #13 using screws C, as shown.

Door Adjustment

If there is a discrepancy between the top and bottom of the two doors, please adjust them upwards or downwards as indicated in the diagrams.

Leveling the Cabinet

If the cabinet appears uneven after assembly, you can adjust each foot pad to level it.

Step 12: Final Tightening

To complete the assembly, tighten all screws A, B, and H to 100%.

Step 13: Prepare for LED Installation

Open the package and take out the LED strip. Ensure the boards are clean and dry before proceeding.

Step 14: Install LED Strip

Thread the LED strip through the bottom hole to the top as shown. Tear off the adhesive backing of the light strip and stick it to the top surface (#1), as shown.

Step 15: Install Anti-Tipping Device

Install the anti-tipping device as shown. This involves securing a bracket to the furniture and the wall, then connecting them to prevent tipping.

WARRANTY

WARRANTY CLAIMS

• There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase, which must be verified by proof of purchase.
• Before making a claim, please call us. Provide your purchase order number and details of the problem. We will respond within 48 hours. If a part is out of stock, we will reply with a shipping date.
• The product must be used in accordance with the instructions provided.
• If the furniture needs to be returned for other reasons, it must be cleaned and dried and returned within 30 days of receipt.

Type of Warranty Claim

• Failure to follow the furniture instructions will invalidate the warranty.
• Damage during installation is not covered, but damage during transportation is.

Scope of Responsibility

• The manufacturer shall not bear any responsibility for misuse or user damage and/or loss of parts during the installation of furniture.
• Damage and scratches occurring after use are not covered by the warranty.

Warranty Coverage (US)

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

RETURNS

Changed Your Mind?

Instructions:

• If you have purchased the item and simply changed your mind, follow the retailer's instructions for returns.

Defective Items

• If your item is defective in any way (i.e., it doesn't work but you can't identify why), please call us in the first instance.

Damaged Items

• If you receive an order with obvious shipping damage from the retailer, we suggest refusing the delivery.
• If the delivery has been accepted and shipping damage is found, please follow the specific instructions advised by the retailer.
• In all circumstances, please save all packaging material and paperwork for the order.
• Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfillment center, you jeopardize your chances of making a claim and may not receive credit for the return.