Product Overview
This document provides step-by-step instructions for assembling the Latitude Run Accent Cabinet. Please ensure all parts and hardware are present before beginning assembly.
Hardware Included
| Code | Description | Quantity |
|---|---|---|
| Ax20 | Bolt | 20 |
| BX20 | Cam Lock | 20 |
| Cx12 | Wooden Dowel | 12 |
| Dx4 | Screw | 4 |
| Ex4 | Screw | 4 |
| Fx1 | Allen Key | 1 |
| Gx4 | Washer | 4 |
| Hx2 | Bracket | 2 |
| Ix48 | Screw | 48 |
| Jx4 | Hinge | 4 |
| Kx4 | Hinge Plate | 4 |
| L1 | Screw | 2 |
| L2 | Screw | 3 |
| L3 | Screw | 4 |
| L4 | Cable Tie | 1 |
| L5 | Wall Anchor | 1 |
| Mx4 | Screw | 4 |
| Nx4 | Hinge | 4 |
| Ox1 | Handle | 1 |
| Px16 | Screw | 16 |
| Qx16 | Screw | 16 |
Note: Some items may not be included in the package.
Cabinet Components
- Component 1: Leg (x2)
- Component 2: Leg (x2)
- Component 3: Base Panel (x1)
- Component 4: Vertical Divider (x1)
- Component 5: Side Panel (x1)
- Component 6: Side Panel (x1)
- Component 7: Shelf (x2)
- Component 8: Shelf (x2)
- Component 9: Top Panel (x2)
- Component 10: Top Panel (x1)
- Component 11: Decorative Panel (x4)
- Component 12: Center Support (x1)
Assembly Steps
Step 1
Attach the legs (Components 1 and 2) to the underside of the base panel (Component 3) using sixteen (16) screws (Ex4).
Visual Description: The base panel is shown flat, with four legs being screwed into its corners.
Step 2
Insert two (2) wooden dowels (Cx12) into the base panel (Component 3). Attach the vertical divider (Component 4) to the base panel using two (2) bolts (Ax2) and two (2) cam locks (BX2).
Visual Description: The vertical divider is shown being connected perpendicularly to the center of the base panel, secured by cam locks and dowels.
Step 3
Attach the side panels (Components 5 and 6) to the base panel (Component 3) and the vertical divider (Component 4). Insert shelves (Component 7) into the designated slots.
Visual Description: The two side panels are attached to the base and the central divider, with the first set of shelves positioned between them.
Step 4
Attach the remaining shelves (Component 8) to the side panels (Components 5 and 6) and the vertical divider (Component 4) using four (4) bolts (Ax4), four (4) cam locks (BX4), and four (4) wooden dowels (Cx4).
Visual Description: The second set of shelves are installed, completing the internal structure of the cabinet.
Step 5
Secure the side panels (Components 5 and 6) to the shelves (Components 7 and 8) and the base panel (Component 3) using eight (8) bolts (Ax8) and four (4) cam locks (BX4), along with eight (8) wooden dowels (Cx8).
Visual Description: Reinforces the connection of the side panels to the main structure using more hardware.
Step 6
Place the top panels (Components 9 and 10) onto the assembled cabinet structure, aligning them with the side panels and vertical divider.
Visual Description: The top panels are positioned on the upper edges of the cabinet sides and divider.
Step 7
Secure the top panel (Component 10) to the cabinet using six (6) bolts (Ax6), six (6) cam locks (BX6), and six (6) wooden dowels (Cx6).
Visual Description: The final top panel is attached, completing the main cabinet body.
Step 8
Attach the hinges (Jx4, Nx4) to the cabinet doors (implied) and the cabinet frame using sixteen (16) screws (Px16) and sixteen (16) screws (Qx16). Attach the handle (Ox1) to the door using screws (Ix48).
Visual Description: Shows the process of attaching hinges to the doors and cabinet, and then the handle to a door.
Step 9
Secure the cabinet, potentially to a wall, using the provided hardware (L1, L2, L3, L4, L5).
Visual Description: Illustrates the final step of securing the cabinet, possibly including anti-tip hardware.
