Step 1
Attach 2x long dowel screws (part 118331) to the designated holes on the underside of the desk top. Align and attach a long side panel to the desk top, ensuring the dowel screws are inserted into the corresponding holes.
Important Information
Tools Required:
- Flathead Screwdriver
- Phillips Head Screwdriver
- Hammer
Assembly Guidelines:
- Assembly requires two people. Do not attempt to assemble alone.
- Always lift the furniture when moving it; do not drag it across the floor.
- If you encounter difficulties or have questions, please contact IKEA for assistance.
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 100086 | Long threaded bolt | 3 |
| 110519 | Short threaded bolt | 4 |
| 100365 | Small screw | 16 |
| 118331 | Long dowel screw | 22 |
| 110126 | Cam lock | 4 |
| 103430 | Cam dowel | 14 |
| 103114 | Wooden dowel | 4 |
| 121030 | Long metal support rail | 1 |
| 100092 | L-shaped Allen key | 1 |
| 101344 | Plastic dowel pin | 19 |
| 153549 | Drawer front support bracket | 2 |
| 112519, 121338 | Small circular plastic feet (set of 4) | 1 |
| 108357 | Large circular plastic feet (set of 4) | 1 |
| 121186, 121208 | Cable management grommet (set of 2) | 1 |
| 112482 | Drawer slide rail | 2 |
Assembly Steps
Step 2
Insert 2x plastic dowel pins (part 101344) into the bottom edge of the side panels. Align and attach the bottom rail to the side panels, ensuring the dowel pins are inserted into the corresponding holes.
Step 3
Insert wooden dowels (part 103114) into the side panel. Attach the other side panel to the frame. Secure the connection by inserting cam dowels (part 103430) and then rotating cam locks (part 110126) into place to tighten the connection. Ensure correct orientation of cam locks as shown in the diagram (incorrect usage is crossed out).
Step 4
Slide the back panel into the grooves of the assembled desk frame. Ensure it is fully seated.
Step 5
Attach 2x short threaded bolts (part 110519) to the designated holes on a drawer side panel. Insert the drawer bottom into the groove of the drawer side panel.
Step 6
Attach the 2x drawer slide rails (part 112482) to the desk frame. Ensure they are oriented correctly for smooth drawer operation.
Step 7
Attach 4x small screws (part 100365) to the drawer side panel to secure additional components.
Step 8
Attach 4x plastic dowel pins (part 101344) to the desk top. Align and attach a long side panel to the desk top, ensuring the dowel pins are inserted into the corresponding holes.
Step 9
Insert 4x plastic dowel pins (part 101344) into the bottom edge of the side panels. Align and attach the bottom rail to the side panels, ensuring the dowel pins are inserted into the corresponding holes.
Step 10
Attach 1x long dowel screw (part 118331) to the designated hole on the underside of the desk top. Align and attach a long side panel to the desk top, ensuring the dowel screw is inserted into the corresponding hole.
Step 11
Insert 1x plastic dowel pin (part 101344) into the bottom edge of the side panel. Align and attach the bottom rail to the side panel, ensuring the dowel pin is inserted into the corresponding hole.
Step 12
Insert cam dowels (part 103430) into the side panel. Secure the connection by rotating cam locks (part 110126) into place to tighten. Ensure correct orientation of cam locks as shown in the diagram (incorrect usage is crossed out).
Step 13
Attach 8x long dowel screws (part 118331) to the designated holes on the underside of the desk top. Align and attach a long side panel to the desk top, ensuring the dowel screws are inserted into the corresponding holes.
Step 14
Attach 1x small screw (part 100365) to the desk frame to secure a support bracket.
Step 15
Insert 2x plastic dowel pins (part 101344) into the side panel. Attach the side panel to the desk frame.
Step 16
Insert 8x cam dowels (part 103430) into the side panel. Secure the connection by rotating cam locks (part 110126) into place to tighten.
Step 17
Attach 4x plastic dowel pins (part 101344) to the desk top. Align and attach a long side panel to the desk top, ensuring the dowel pins are inserted into the corresponding holes.
Step 18
Attach 3x long threaded bolts (part 100086) using the Allen key (part 100092) to secure the long metal support rail (part 121030) to the desk frame.
Step 19
Attach 9x long dowel screws (part 118331) to the designated holes on the underside of the desk top. Align and attach a long side panel to the desk top, ensuring the dowel screws are inserted into the corresponding holes.
Step 20
Slide the back panel into the grooves of the assembled desk frame. Ensure it is fully seated.
Step 21
Insert 4x cam locks (part 110126) into the side panel.
Step 22
Insert 3x cam dowels (part 103430) into the side panel.
Step 23
Attach 2x drawer front support brackets (part 153549) to the desk frame. Attach 2x large circular plastic feet (part 108357) to the bottom of the desk. (Note: The diagram indicates not to use the small circular plastic feet (parts 112519/121338) at this point).
Step 24
Attach 1x small screw (part 100365) to the left side of the desk frame and 1x small screw (part 100365) to the right side of the desk frame. These screws are for securing the drawer slides.
Step 25
Carefully slide the assembled drawer into the desk frame, aligning it with the installed drawer slides.
Step 26
Attach the cable management grommet (parts 121186/121208) to the designated opening on the desk top. Attach 4x small circular plastic feet (parts 112519/121338) to the bottom of the desk.
