MICKE Desk Assembly Instructions

Parts List

• 3x Screw (100086)
• 4x Screw (110519)
• 16x Screw (100365)
• 22x Screw (118331)
• 4x Cam lock (101344)
• 14x Cam lock (110126)
• 4x Cam lock (103430)
• 1x Drawer slide rail (121030)
• 1x Allen key (100092)
• 19x Wooden dowel (101344)
• 2x Desk leg panel (153549)
• 1x Drawer bottom panel (112519)
• 1x Drawer back panel (121338)
• 1x Drawer front panel (108357)
• 2x Drawer side panel (112482)
• 1x Cable grommet (121186)
• 4x Foot (108357)

Assembly Steps

1. Step 1: Attach the desk legs to the underside of the desk top using screws. Ensure the correct orientation as shown in the diagram.
2. Step 2: Insert wooden dowels into the designated holes on the desk leg panels.
3. Step 3: Secure the desk leg panels using cam locks and screws.
4. Step 4: Assemble the drawer frame by folding and securing the panels.
5. Step 5: Attach the drawer slides to the desk legs and the drawer sides.
6. Step 6: Slide the drawer into the desk frame.
7. Step 7: Secure the drawer slides with screws.
8. Step 8: Attach the drawer front panel to the drawer frame using screws and dowels.
9. Step 9: Attach the drawer side panels to the drawer frame.
10. Step 10: Insert screws into the pre-drilled holes on the desk frame.
11. Step 11: Attach the drawer support beams using dowels and screws.
12. Step 12: Secure the drawer support beams with cam locks.
13. Step 13: Attach the drawer bottom panel to the drawer frame.
14. Step 14: Secure the drawer slides to the desk frame.
15. Step 15: Attach the drawer side panels to the desk frame.
16. Step 16: Secure the desk structure with cam locks.
17. Step 17: Attach the back panel of the desk.
18. Step 18: Secure the back panel with screws and dowels.
19. Step 19: Attach the drawer runners to the desk frame.
20. Step 20: Slide the assembled drawer into the desk.
21. Step 21: Secure the drawer runners with cam locks.
22. Step 22: Secure the drawer runners with cam locks.
23. Step 23: Attach the drawer handles or knobs.
24. Step 24: Attach the feet to the bottom of the desk legs.
25. Step 25: Attach the drawer slides to the desk frame.
26. Step 26: Insert the drawer into the desk.
27. Step 27: Insert the cable grommet into the desk top.

Important Notes

• Ensure all parts are present before beginning assembly.
• Follow the diagrams carefully to ensure correct assembly.
• Do not overtighten screws.
• If you encounter any issues, refer to the IKEA website or contact IKEA customer service.