Before You Begin
Ensure you have the necessary tools: a screwdriver (flathead and Phillips), a hammer, and a wrench. Assembly is easier with two people. Always place furniture on a soft surface to prevent scratches. Do not use a hammer directly on furniture parts; use a protective block if necessary. If you encounter any issues, contact IKEA for support.
Parts List Overview
This section outlines the main components and hardware required for assembling the MICKE desk. Quantities are approximate and for illustrative purposes; refer to the physical manual for exact counts and part numbers.
| Component/Hardware | Approx. Quantity | Part Number Examples |
|---|---|---|
| Cam Lock Screws | 3x | 121817 |
| Wood Dowels | 20x | 101344 |
| Cam Locks | 22x | 118331 |
| Drawer Runners (Desk) | 2x | 112482 |
| Drawer Runners (Drawer) | 2x | 109338 |
| Adjustable Feet/Pads | 4x | 108357 |
| Cable Management Grommet | 1x | 121304, 121208, 121186, 10060533 |
| Desk Leg Frame | 1x | 154193, 10060225 |
| Small Screws (various types) | Multiple | 100365, 113287, 110519, 101514 |
| Connecting Bolts/Pins | Multiple | 109221, 121030, 100092 |
| Shelf Pins | 8x | 101514 |
| Door Hinges | 2x | (Not explicitly numbered, but shown) |
Assembly Steps
Follow these steps to assemble your IKEA MICKE desk. The manual illustrates two possible configurations: with the drawer/cabinet unit on either the left or right side. The assembly process for the main desk structure is largely the same, with modular components allowing for this flexibility.
Assemble the Drawer Box
Begin by connecting the drawer sides and back panel using wood dowels (e.g., 101344) and cam lock screws (e.g., 118331). Secure the drawer bottom panel by sliding it into the grooves. Attach the drawer runners (e.g., 109338) to the drawer sides using small screws (e.g., 110519).
Construct the Main Desk Frame
Attach the side panels to the back panel using wood dowels and cam lock screws. Ensure all connections are tight. Insert the connecting bolts (e.g., 109221, 121030) into the pre-drilled holes on the side panels. These will connect to the desk top.
Attach the Desk Top
Carefully align the desk top with the assembled side units. Secure the desk top to the side units using cam locks (e.g., 110126) that engage with the connecting bolts. Ensure the cable management grommet hole is correctly positioned.
Install the Drawer
Slide the assembled drawer onto the desk's drawer runners (e.g., 112482). Ensure it glides smoothly. Secure the drawer to the runners if necessary, as indicated by the diagrams.
Assemble and Attach the Leg Frame
Connect the components of the metal leg frame (e.g., 154193) if it comes in multiple pieces. Attach the assembled leg frame to the desk structure using the provided screws and cam lock screws (e.g., 118331, 121817). Ensure it is securely fastened to provide stability.
Install Cabinet Door and Shelves (if applicable)
If your MICKE desk includes a cabinet, attach the hinges to the cabinet door and the desk frame. Mount the door, ensuring it opens and closes smoothly. Insert shelf pins (e.g., 101514) into the desired height holes and place the shelves (e.g., 104663) on top.
Add Finishing Touches
Insert the cable management grommet (e.g., 121304) into the hole on the desk top. Attach the protective pads (e.g., 108357) to the bottom of the desk legs to prevent scratching floors.
Hinge Adjustment
For cabinet doors, adjust the hinges to ensure proper alignment and gap. Typically, hinges allow for vertical, horizontal, and depth adjustments using screws on the hinge mechanism. Turn the screws incrementally to achieve the desired door position.
