JLab JBuds Work Headphones
We are pleased that you are wearing JLab headphones! We are proud of our products and fully convinced of their quality.
Your Warranty
All warranty claims require JLab approval and are at our sole discretion. To ensure warranty validity, keep your proof of purchase.
Contact Us
Write to us at support@jlab.com or visit intl.jlab.com/contact.
Register Today
Visit intl.jlab.com/register for product updates, tutorial tips, FAQs, and more.
Bluetooth Pairing
- Turn on Bluetooth in your device settings.
- Press and hold the button for 8 seconds. Release. The blue/red indicator light will flash.
- Select "JLab JBuds Work" in your device settings to establish a connection.
Visual Description: Step 2 shows a button being held, with a visual indicator of a flashing blue/red light. Step 3 shows a mobile device screen displaying Bluetooth settings with "JLab JBuds Work" selected for connection.
Multipoint Connection (Connect 2 Devices Simultaneously)
- When the first device is connected, turn off Bluetooth in its settings. The JBuds Work will automatically initiate Bluetooth pairing.
- Go to your second device's Bluetooth settings and connect to "JBuds Work".
- Go to your first device's settings. Turn on Bluetooth and reconnect to "JBuds Work".
Visual Description: Step 1 shows a mobile device screen with Bluetooth turned off. Step 2 shows a mobile device screen connecting to "JLab JBuds Work". Step 3 shows a mobile device screen with Bluetooth turned on and showing "JLab JBuds Work Connected".
For more information and troubleshooting on multipoint connection, visit: intl.jlab.com/multipoint
Button Functions
- Volume Up: Press once
- Next Track: Press and hold for 2+ seconds
- Volume Down: Press once
- Previous Track: Press and hold for 2+ seconds
- Power On/Off: Press and hold for 3+ seconds
- Play/Pause: Press once
- Answer/End Call: Press once (works when the microphone is in the lower position)
- Reject Incoming Call: Press and hold for 1+ seconds
- Activate Siri (iOS) or “Ok Google” (Android): Press twice
- Sidetone On/Off: Triple press (during a call)
- Bluetooth Pairing: See Bluetooth pairing section
- EQ Switch (Voice / Music): Press and hold both buttons simultaneously
Boom Microphone
Automatic Call Answer: Flip down
Automatic Call End / Reject Incoming Call: Flip up
Microphone Mute On/Off: The microphone can be muted by pressing the designated button. The indicator shows "MUTE OFF" (red circle) and "MUTE ON" (grey circle).
Modes: The headphones support both Mono Mode and Stereo Mode.
Visual Description: Diagrams illustrate the boom microphone's flip-down and flip-up positions. Separate visuals show the mute button states (red for off, grey for on) and the headphones configured for mono and stereo listening.
Charging
Connect to a computer or a USB 5v 1A (or less) output device using the provided cable.
Note: The JBuds Work can be charged simultaneously while Bluetooth is connected. After charging, the device will power on and connect.
Visual Description: Diagram shows a USB-A connector plugging into a port and a USB-C connector plugging into the headphones for charging.
AUX Input
The JBuds Work can be used as a wired headset with an AUX cable.
Note: The headset still uses a limited amount of battery for microphone functionality.
Visual Description: Diagram shows a 3.5mm audio jack connecting to the headphones.
Precautions
- Avoid moisture or liquids getting into the earcups.
- Avoid excessive heat, cold, and humidity.
- Avoid dropping or crushing the headphones, and do not strain the cable with sharp tugs or excessive force. Do not bend the cable at sharp angles.
- Earwax may accumulate in the earcups, degrading sound quality. To improve sound quality, carefully remove earwax with a cotton swab or other small tool.
- If you experience discomfort or pain, reduce the volume or temporarily stop using the headphones.
- If you experience persistent discomfort while using the product, discontinue use and consult a doctor.
- Handle the headphones with the same care as good sunglasses and store them in a safe place between uses.
Resources
Shop Products | Product Updates | Breaking in your headphones
[Download on the App Store] [Get it on Google Play]
Visit the JLab Store for accessories and more.
