PowerA Dual Charging Station for Xbox
User Manual
Product Overview
This user manual provides instructions for the PowerA Dual Charging Station, designed for Xbox Wireless Controllers.
Getting Started
Visual Guide:
- Connecting the AC Adapter: The diagram illustrates connecting the included AC adapter to the charging station and then plugging it into a power outlet.
- Attaching the Charge-Thru Battery Door: Diagrams show how to attach the correct battery door to the back of your Xbox Wireless Controller. Use door marked 'A' for Xbox One controllers and door marked 'B' for Xbox Series X controllers.
- Placing Controller on Station: A diagram shows an Xbox Wireless Controller being placed onto the charging station for charging.
Contents
- Dual Charging Station
- (2) 1100mAh Rechargeable Batteries
- Charge-thru Battery Doors (2 marked 'A' for Xbox One, 2 marked 'B' for Xbox Series X)
- AC Adapter
- User Manual
How to Use
- Install a rechargeable battery into the battery compartment of your Xbox Wireless Controller.
- Attach the correct Charge-thru Battery Door to the back of the controller. Verify the marking on the underside of the door: 'A' for Xbox One, 'B' for Xbox Series X.
- Connect the AC Adapter to the Charging Station and plug it into an available power outlet.
- Place your Xbox Wireless Controller onto the Charging Station.
- Check the LED indicator color for charge status: Amber indicates charging, and White indicates fully charged.
Note: For the battery charge level, check the Xbox on-screen display.
Charging
Use only the included AC Adapter to power the charger.
Battery Warnings and Safety
Battery Leakage Warning
Leakage of battery ingredients or combustion of product components can cause personal injury and damage to the controller. Avoid contact with skin. If contact occurs, wash thoroughly with soap and water. If battery liquid contacts eyes, flush immediately with water and seek medical attention.
General Battery Warning
Do not attempt to replace the rechargeable battery yourself, as this may damage the battery, leading to overheating, fire, or injury. The Nickel-metal hydride battery should be serviced or recycled by PowerA or an authorized provider. Dispose of batteries separately from household waste according to local environmental laws and guidelines.
Do not expose the product with rechargeable batteries to very high temperatures (e.g., direct sunlight, hot vehicles). This can cause overheating, fire, performance degradation, or shortened service life.
Avoid using the product in locations with high static electricity, as this could damage internal safety devices.
If the battery emits an odor, generates heat, or appears abnormal during use, recharging, or storage, immediately remove it from the charger and place it in a sealed container (e.g., a metal box).
Discarded batteries may cause fire; do not heat controllers or throw them into fire.
Troubleshooting
For FAQs, visit PowerA.com/Support.
Q1: The Charging Stand is not charging?
- A1: Confirm that the included 1100mAh Rechargeable Battery and Charge-thru Battery Door are properly installed.
- A2: Confirm that the Charging Station is properly connected to the outlet via the AC Adapter.
Compliance Information
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules.
Industry Canada Compliance
CAN ICES-003(B)/NMB-003(B): This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.
Regional Compliance Symbols
WEEE Symbol: Indicates battery disposal outside of household waste per local regulations. Contact local authorities or retailers for guidance.
CE Mark: Declaration from the manufacturer that the product meets applicable European Directives and Regulations for health, safety, and environmental protection.
UKCA Mark: Declaration from the manufacturer that the product meets applicable UK Regulations for health, safety, and environmental protection.
Regulatory Compliance Mark (ACMA): Visible indication of compliance with applicable Australian Communications and Media Authority (ACMA) regulatory arrangements, including electrical safety and electromagnetic compatibility (EMC) requirements.
Declaration of Conformity
ACCO Brands USA LLC, 4 Corporate Way, Lake Zurich, IL 60047 USA, declares that this charger complies with Directive 2014/30/EU. The full text of the EU Declaration of Conformity is available at: PowerA.com/compliance.
Input: AC 100-240V, 50/60Hz, 0.2A Max
Output: 5V 1A
Manufacturer and Support
Manufactured by: ACCO Brands USA LLC, 4 Corporate Way, Lake Zurich, IL 60047. Websites: ACCOBRANDS.com | POWERA.com
Made In: China
Customer Support: For support with authentic PowerA accessories, please visit PowerA.com/Support.
Warranty Information
Two Year Limited Warranty
For warranty details or support, please visit PowerA.com/Support.
Australian Warranty Statement
This product comes with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for other foreseeable loss or damage. You are also entitled to have goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure. If purchased within Australia or New Zealand, this product has a one-year warranty from the date of purchase. Defects must appear within one year from purchase to claim warranty. All warranty claims must be facilitated through the retailer of purchase according to their return policies. Consumer is responsible for return expenses.
Australian Wholesale Distributor: Level 2, 2 Darling Street South Yarra, Australia VIC 3141. bluemouth.com.au, Email: support@bluemouth.com.au, +61 (3) 9867 2666.
