PowerA Charging Stand for Xbox Wireless Controllers

Contents

• Single Charging Stand
• (1) 1100 mAh Ni-MH Battery
• Charge-thru Battery Doors: (1) 'A' for Xbox One and (1) 'B' for Xbox Series X|S
• User Manual

How to Use

1. Install the Ni-MH battery into the battery compartment of your Xbox Wireless Controller.
2. Attach the correct charge-thru battery door to the back of the Xbox Wireless Controller after checking the underside of the door: Use door 'A' for Xbox One and door 'B' for Xbox Series X|S.
3. Plug the USB cable into the Xbox Console.
4. Place your Xbox Wireless Controller on the Charging Stand.
5. Check the LED color for charge status: amber while charging and white once fully charged.

Note: For battery charge level, check the Xbox onscreen display.

Charging

Always connect the Charging Stand directly to your Xbox console. Do not use any other means for charging.

Safety Warnings

Battery Leakage Warning

• Leakage of chemicals contained within the battery pack can cause personal injury as well as damage to the game controller. ⚠️
• Avoid allowing battery chemicals to contact skin. If contact occurs, immediately wash thoroughly with soap and water.
• If liquid leaking from a battery pack comes into contact with your eyes, DO NOT RUB EYES! Immediately flush eyes thoroughly with clean running water and seek medical attention to prevent injury to eyes.

Battery Warning

• Do not attempt to repair the Ni-MH battery yourself—you may damage the battery, which could cause overheating, fire, and injury.
• The Ni-MH battery in your device should be serviced or recycled by PowerA or an authorized provider and must be recycled or disposed of separately from household waste. Dispose of batteries according to your local environmental laws and guidelines.
• Do not use or leave a device containing rechargeable batteries in a high-temperature environment (e.g., in strong direct sunlight, or in a vehicle in hot weather). High temperatures may cause batteries to overheat or catch fire, and the battery performance or longevity may be negatively affected.
• Do not use a device containing rechargeable batteries in an environment with high levels of static electricity. Excessive static electricity can impair the batteries’ internal safety measures, increasing the risk of overheating or fire.
• If the battery gives off an odor, generates heat, or in any way appears abnormal during use, recharging or storage, immediately remove it from any charging device and place it in a sealed fireproof container such as a metal box, or in a safe location away from people and flammable items.
• Discarded batteries may cause fire. Do not heat the controller or battery, or place either in or near fire.

Troubleshooting

For current FAQs, visit PowerA.com/Support.

Q: What if my Charging Stand isn’t working?

A: Confirm you properly installed the included 1100 mAh Ni-MH battery and charge-thru battery door. Confirm the Charging Stand is properly connected to the Xbox console via the USB cable. Confirm the controller is properly placed on the Charging Stand.

Specifications

Compliance Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules.

Industry Canada Statement

CAN ICES-003(B)/NMB-003(B)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference; 2. This device must accept any interference, including interference that may cause undesired operation of the device.

Manufacturer & Support

Manufactured for: ACCO Brands USA LLC, 4 Corporate Drive, Lake Zurich, IL 60047

Website: ACCOBRANDS.com | POWERA.com

Made in: China

Customer Support: For support with your authentic PowerA accessories, please visit PowerA.com/Support.

Warranty

2-Year Limited Warranty: Visit PowerA.com/Support for details.

Warranty Against Defects, Australia and New Zealand Customers: This product is provided with a 2-year warranty against defects in manufacturing or materials from the date of purchase. ACCO Brands will either repair or replace a faulty or defective product subject to the conditions of this warranty. Claims under this warranty must be made to the place of purchase within the warranty period with proof of purchase by the original purchaser only. Expenses associated with a warranty claim are the responsibility of the consumer. Conditions of this warranty are on our website: PowerA.com/warranty-ANZ.

This warranty is provided in addition to other rights or remedies available to you under the law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Distributor Contact Details:

Australian Customers: ACCO Brands Australia Pty Ltd, Locked Bag 50, Blacktown BC, NSW 2148, Phone: 1300 278 546, Email: consumer.support@powera.com

New Zealand Customers: ACCO Brands New Zealand Limited, PO Box 11-677, Ellerslie, Auckland 1542, Phone: 0800 800 526, Email: consumer.support@powera.com

Additional Legal Information

© 2023 ACCO Brands. All Rights Reserved. PowerA and PowerA Logo are trademarks of ACCO Brands. Nintendo Switch is a trademark of Nintendo. Licensed by Nintendo.

Regional Compliance Symbols

More information available via web-search of each symbol name.

Waste Electrical and Electronic Equipment (WEEE)

Electrical and electronic devices and batteries contain materials and substances that can have damaging effects on human health and the environment. This symbol ♻️ indicates that this device and the battery must not be treated as household waste and must be collected separately. Dispose of the device via a collection point for the recycling of waste electrical and electronic equipment within the EU, UK and in other European countries that operate separate collection systems for waste electrical and electronic equipment and batteries. By disposing of the device and the battery in the proper manner, you help to avoid possible hazards for the environment and public health that could otherwise be caused by improper treatment of waste equipment. The recycling of materials contributes to the conservation of natural resources.

European Conformity (CE)

CE: A declaration from the manufacturer that the product meets applicable European Directives and Regulations for health, safety, and environmental protection. ✅

UK Conformity Assessment (UKCA)

UKCA: A declaration from the manufacturer that the product meets applicable UK Regulations for health, safety, and environmental protection.

Regulatory Compliance Mark (RCM)

RCM: Indicates that the product complies with the relevant Australian and New Zealand electrical safety, electromagnetic compatibility (EMC) and related requirements.