BILLY Bookcase
Important Safety Information
WARNING!
Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
This document contains safety warnings and assembly instructions in multiple languages. The primary language for this document is English.
Tools Required (Not Included)
- Screwdriver [⚙️]
- Hammer [?]
- Pencil
Parts Included
| Part ID | Quantity | Description |
|---|---|---|
| 118331 | 8x | Screw |
| 101351 | 12x | Dowel |
| 151705 | 2x | Screw |
| 151706 | 2x | Screw |
| 119081 | 8x | Cam Lock |
| 131372 | 8x | Shelf Pin |
| 109041 | 2x | Screw |
| 100823 | 4x | Cap/Cover |
| 106989 | 2x | Wall Bracket |
| 153548 | 5x | Shelf Support |
Assembly Instructions
Step 1
Insert 12 dowels (101351) into the pre-drilled holes on the two side panels.
Step 2
Attach the bottom panel to the two side panels using 8 screws (118331) and a screwdriver [⚙️].
Step 3
Insert the two vertical panels into the base, aligning them with the dowels. Push down firmly [⬇️].
Step 4
Attach the top panel to the side panels using 4 cam locks (119081). Turn cam locks clockwise [↪️] with a screwdriver [⚙️] to secure.
Step 5
Prepare to attach the back panel.
Step 6
Secure the back panel using 4 cam locks (119081). Turn cam locks clockwise [↪️] with a screwdriver [⚙️] to secure.
Step 7
Slide the back panel into its grooves.
Step 8
Attach the bottom trim pieces to the front of the base using 2 screws (151706) and 2 screws (151705).
Step 9
Attach 5 shelf supports (153548) to the inside of the side panels at your desired height using a hammer [?].
Step 10
Place the shelf onto the shelf supports.
Step 11
Tilt the assembled unit carefully. This is a preparation step for wall mounting.
Step 12
Attach 2 wall brackets (106989) to the top rear edge of the bookcase.
Step 13
Secure the wall brackets to the wall using appropriate screws and wall plugs (not included). Use 2 screws (109041) for this step, in conjunction with the wall brackets.
Step 14
Insert 8 shelf pins (131372) into the pre-drilled holes on the inside of the side panels at your desired shelf heights.
Step 15
Place the remaining shelves onto the shelf pins.
[⚠️] Always secure furniture to the wall using the provided wall attachment device(s) to prevent tip-over accidents. Ensure you use wall plugs and screws suitable for your wall type.
