Safety Warning
WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided. Screws and plugs for the wall are not included. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.
This warning is also available in Spanish, Portuguese, Chinese, Korean, Japanese, Indonesian, Malay, Arabic, Thai, and Vietnamese.
Tools Required
- Screwdriver (Phillips head) ?
- Screwdriver (Flat head) ?
- Hammer ?
- Ruler ?
Parts List
| Quantity | Description | Part Number |
|---|---|---|
| 12x | Dowel | 118331 |
| 16x | Screw | 101351 |
| 6x | Cam Bolt | 151705 |
| 12x | Cam Lock | 153548 |
| 16x | Shelf Support Pin | 131372 |
| 6x | Small Screw | 151706 |
| 2x | Wall Attachment Bracket | 106989 |
| 4x | Wall Screw | 109041 |
| 4x | Wall Plug | 100823 |
| 5x | Long Panel (Shelf) | N/A |
Assembly Instructions
Step 1
Insert 16 dowels (118331) into the pre-drilled holes on the ends of the 5 long panels (shelves).
Step 2
Screw 12 cam bolts (151705) into the corresponding holes on the side panels.
Step 3
Attach the bottom panel to the side panels. Insert 6 cam locks (153548) into the large holes on the bottom panel and turn them clockwise to secure the cam bolts.
Step 4
Attach the top panel to the side panels using 4 cam locks (153548). Turn them clockwise to secure.
Step 5
Attach the middle divider panel to the bottom and top panels. Insert cam bolts and secure with cam locks.
Step 6
Place the top panel onto the assembled structure, aligning it with the side panels and divider.
Step 7
Insert 6 shelf support pins (131372) into the desired holes on the inside of the side panels and the middle divider.
Step 8
Carefully slide the back panel into the grooves along the back edges of the assembled unit.
Step 9
Secure the back panel in place using 6 small screws (151706).
Step 10
Attach the two L-shaped wall attachment brackets (106989) to the top of the side panels using 4 screws (109041).
Step 11
Wall Mounting: Position the bookcase against the wall. Mark the wall through the holes in the wall attachment brackets. Drill holes in the wall and insert wall plugs (100823) if needed. Secure the bookcase to the wall using the wall screws (109041) through the brackets.
Step 12
Place the 5 long panels (shelves) onto the inserted shelf support pins (131372).
Step 13
Ensure the bookcase is stable and securely attached to the wall. The diagram shows arrows indicating the placement of shelves and the final wall securing.
