IKEA BILLY Bookcase Assembly Instructions
Model: BILLY Bookcase, Oak Effect, 80x28x202 cm
Article Number: AA-2294027-2
Important Safety Information
WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
Note: Screws and plugs for the wall are not included. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.
The following languages are included in this document: English, Spanish, Portuguese, Chinese (Simplified and Traditional), Korean, Japanese, Indonesian, Malay, Arabic, Thai, and Vietnamese.
Tools Required
The following tools are recommended for assembly:
- Screwdriver (Phillips head)
- Hammer
- Measuring tape/Ruler
Parts List
Please verify you have all the parts before starting assembly:
| Item | Description | Quantity |
|---|---|---|
| 101351 | Cam lock screw | 12x |
| 118331 | Cam lock | 12x |
| 151705 | Wooden dowel | 16x |
| 151706 | Shelf support pin | 18x |
| 119081 | Screw | 16x |
| 131372 | Screw | 2x |
| 100823 | Bracket | 4x |
| 106989 | Bracket | 2x |
| 153548 | Nail | 5x |
Assembly Steps
- Step 1: Attach wooden dowels (151705) to the side panels. Insert cam locks (118331) into the corresponding holes on the base and top panels.
- Step 2: Connect the side panels to the base panel using the cam lock screws (101351) and cam locks (118331).
- Step 3: Insert the back panels into the grooves on the side and base panels.
- Step 4: Secure the back panels using screws (119081) and brackets (100823).
- Step 5: Attach the top panel to the side panels using cam lock screws (101351) and cam locks (118331).
- Step 6: Insert shelf support pins (151706) into the desired holes on the side panels.
- Step 7: Place the shelves onto the shelf support pins.
- Step 8: Attach the wall mounting brackets (106989) to the top of the bookcase using screws (131372).
- Step 9: Secure the bookcase to the wall using appropriate screws and plugs (not included), ensuring it is level and stable.
- Step 10: Insert nails (153548) to secure the back panel further if needed.
Wall Attachment
It is crucial to secure the bookcase to the wall to prevent tipping. Use the provided brackets (106989) and appropriate wall fixings for your wall type. Consult a professional if you are unsure about the correct fixings.
Diagram Description: The diagram shows how to attach the L-shaped brackets to the top of the bookcase and then to the wall. Ensure the bookcase is stable before use.
