GROWNSY T6 Bottle Warmer User Manual

Introduction

Thank you for choosing the GROWNSY T6 Bottle Warmer. This manual provides essential information for the safe and effective use of your device. Please read it carefully before operation and keep it for future reference.

[Diagram: An illustration showing the GROWNSY T6 Bottle Warmer from the front, highlighting its compact design and control panel.]

Key Features

• ⚡ Fast and uniform warming of baby bottles and food jars.
• ⚙️ Simple, intuitive control panel for easy operation.
• ?️ Precise temperature control to preserve nutrients.
• ? Easy to clean and maintain.
• ✅ Safe materials, BPA-free.

Important Safety Precautions

⚠️ Always read and follow all safety instructions before using the bottle warmer.

• This appliance is for household use only.
• Do not immerse the base unit, cord, or plug in water or other liquids.
• Ensure the voltage indicated on the appliance corresponds to the local mains voltage before connecting.
• Always unplug the appliance when not in use and before cleaning.
• Do not operate the appliance if it has a damaged cord or plug, or if it malfunctions.
• Keep the appliance and its cord out of reach of children.
• Do not place the appliance on or near a hot gas or electric burner, or in a heated oven.
• Use caution when handling hot liquids and steam.
• [Diagram: An illustration showing the "do not immerse in water" symbol.]

Getting Started and Operation

Follow these steps to prepare and use your GROWNSY T6 Bottle Warmer:

1. 1️⃣ Place the bottle warmer on a stable, flat, and heat-resistant surface.
2. 2️⃣ Pour the appropriate amount of water into the water reservoir. Refer to the warming guide for recommended water levels based on bottle size and contents. [Diagram: Illustration showing water being poured into the reservoir.]
3. 3️⃣ Place the baby bottle or food jar into the warming basket. Ensure it is stable.
4. 4️⃣ Place the warming basket with the bottle/jar into the bottle warmer.
5. 5️⃣ Connect the power cord to a suitable electrical outlet.
6. 6️⃣ Use the control dial to select the desired warming time or temperature setting. The indicator light will illuminate. [Diagram: Close-up of the control dial and indicator light.]
7. 7️⃣ Once the warming cycle is complete, the device will automatically switch to keep-warm mode (if applicable) or shut off. Carefully remove the bottle or jar using tongs or by lifting the basket. ⚠️ Steam can cause burns.

Warming Guide (Example):

[Note: These are approximate times and may vary based on starting temperature of contents and ambient room temperature.]

Cleaning and Maintenance

? Regular cleaning is essential for hygiene and optimal performance.

• Always unplug the unit and allow it to cool completely before cleaning.
• Wipe the exterior with a damp cloth. Do not use abrasive cleaners or scouring pads.
• To descale the water reservoir, fill it with a mixture of equal parts white vinegar and water. Let it sit for 30 minutes, then empty and rinse thoroughly. Repeat if necessary.
• The warming basket can be washed by hand with mild soap and water.
• [Diagram: Illustration showing the components of the bottle warmer being cleaned.]

Troubleshooting

If you encounter any issues with your GROWNSY T6 Bottle Warmer, consult the table below:

Specifications