GROWNSY N9T Bottle Warmer User Manual
Your guide to safely and efficiently warming baby's milk and food.
Welcome
Thank you for purchasing from GROWNSY. We are dedicated to supporting parents with high-quality maternity and baby products, including bottle warmers, nasal aspirators, sterilizers, and more. Our goal is to be your one-stop maternal & baby brand.
For any questions or issues, please email us. We strive to resolve customer issues within 24 hours.
Founder: Randell
Product Specifications
Model: N9T
Power: 400W
Capacity: 160ml (Max line indicated)
Component Introduction
- Lift-out Basket
- Select Initial Temp Button
- Select Bottle Button
- Select Volume Button
- Power Button (also controls Night Light)
*Note: Do not touch the device while it is working to prevent burns.
Operation Modes
1. ON/OFF and Night Light
Press the power button to turn the appliance on or off. The indicator light will turn on/off accordingly. Long press the power button to turn the night light on or off. The night light can be controlled independently at any time.
2. Milk Warming (Standard)
Preparation: Fill distilled water into the bottle warmer to the MAX line.
Steps:
- Place the bottle and lift-out basket into the bottle warmer.
- Press the power button to turn on the device.
- Select the desired "Material" (e.g., Silicon, Plastic, Bag, Glass), "Initial Temp" (Frozen, Refrig, Room), and "Volume" (e.g., 1-2oz, 3-4oz, 5-6oz, 7+oz). The corresponding indicators will flash and then stay steady.
- The timer will start blinking. You can adjust the time (from 10 seconds to 35 minutes) if needed.
- Press the power button again to start heating.
- The device will beep five times when the milk is ready and enter a 2-hour keep-warm mode (indicated by the power light remaining on).
Note: If you need to adjust the time after heating has started, you must do so within the first 20 seconds. Otherwise, turn off the device and restart the process.
Default Settings: Plastic, Refrig, 1-3oz. These can be changed as desired.
3. DIY Mode
Use DIY mode for gradual heating, maintaining specific temperatures, or sterilization.
- Keep Milk Warm: Select "DIY", confirm Material and Volume, then set the temperature to 98°F. Press the power button. The device will beep when ready and keep the milk warm for up to 24 hours.
- Sterilization: Select "DIY", set the temperature to 212°F, and press the power button. The device will run a 10-minute sterilization cycle.
- Heating Food: Select "DIY", confirm Material and Volume, then set the temperature between 95°F and 176°F. Press the power button. The device will beep when ready and keep the food warm for up to 24 hours.
Note: For all DIY modes, ensure distilled water is filled to the MAX line.
Operation Steps Diagram Description
The manual includes a series of numbered diagrams (1-14) illustrating the operation steps. These generally show:
- Diagram 1: Product overview with labels for settings (Frozen, Refrig, Room, DIY; Silicon, Plastic, Bag, Glass; Volume options).
- Diagrams 2-5: Filling water to the MAX line and placing the bottle/basket.
- Diagrams 6-8: Selecting Material, Initial Temp, and Volume.
- Diagram 9: Pressing the power button to start heating.
- Diagrams 10-11: Visual representation of the selected settings and heating process.
- Diagram 12: Device beeping when ready.
- Diagram 13: Smart memory function indication.
- Diagram 14: Quick reference guide visual.
Quick Reference Guide
Warm Tip: Before feeding, gently shake the bottle and test the milk temperature on your wrist.
- Fill distilled water to the MAX line.
- Place bottle and lift-out basket in the warmer.
- Press the power button.
- Select Initial Temp, Bottle Material, and Volume.
- Press power button to start heating.
- Device beeps when ready; it will keep warm for up to 2 hours.
Warming Time Chart
The following table provides estimated warming times based on bottle material, initial temperature, and milk volume. These are approximate and can be affected by ambient temperature and other factors.
| Bottle Material | Initial Temp | Milk Volume | |||
|---|---|---|---|---|---|
| 2oz | 4oz | 6oz | 8oz | ||
| Plastic (Dr. Brown's) | Room (22°C/72°F) | 1min 55s | 2min 58s | 5min 58s | 4min 20s |
| Refrig (4°C/39°F) | 2min 44s | 3min 35s | 8min 10s | 5min 40s | |
| Frozen (0°C/32°F) | 3min 30s | 3min 50s | 10min 40s | 8min | |
| Milk bag | Room (22°C/72°F) | 3min 50s | 4min 10s | 14min 34s | 9min 40s |
| Refrig (4°C/39°F) | 4min 10s | 5min 40s | 9min 20s | 10min 50s | |
| Frozen (0°C/32°F) | 5min 30s | 6min 30s | 10min 20s | 12min 20s | |
| Silicone | Room (22°C/72°F) | 5min 30s | 8min | 13min 10s | 10min 50s |
| Refrig (4°C/39°F) | 6min 20s | 8min 20s | 20min 10s | 12min 20s | |
| Frozen (0°C/32°F) | 8min | 9min 40s | 20min 19s | 31min 20s | |
| Glass | Room (22°C/72°F) | 3min 30s | 4min 20s | 5min 30s | 6min 20s |
| Refrig (4°C/39°F) | 4min | 5min 30s | 8min 10s | 8min 40s | |
| Frozen (0°C/32°F) | 5min | 6min 30s | 10min 40s | 10min 20s | |
Note: This chart does not provide exact times as initial temperature, bottle material, and ambient temperature can affect results. If milk is too cold, reheat for 0.5-1 minute. If too hot, cool before feeding.
Cleaning & Descaling
Regular descaling is recommended to maintain the bottle warmer's efficiency and prevent malfunctions like automatic shutdown.
Caution: Water in the bottle warmer can be hot after use. Be careful to avoid burns.
Warranty
The product comes with a one-year warranty.
Important Notes
- Always use distilled water.
- The device beeps when ready and enters a 2-hour keep-warm mode.
- Long press the power button for the night light.
- For sterilization, use DIY mode at 212°F for 10 minutes.
- Check milk temperature on your wrist before feeding.
- Descale regularly to ensure optimal performance.
Troubleshooting & Precautions
- Default settings: Plastic, Refrig, 1-3oz. Adjust as needed.
- Resetting: Press Material, Initial Temp, or Volume buttons during operation to reset.
- Shutdown: Press the power button during operation to shut down.
- Hot Water: Exercise caution as the water can be hot and cause burns.
