GROWNSY Bottle Warmer - User Manual

Getting Started

Before using the bottle warmer, please check all parts to ensure safety and cleanliness.

• Make sure to fill the bottle warmer with the appropriate amount of distilled water to prevent dry burning. The bottle should not be floating after adding water.
• Place the bottle warmer on a flat and level surface.

Power Requirements: [Details not specified in provided text]

Power Consumption: [Details not specified in provided text]

Safety Note: Please take precautions to prevent burns during use, as the product may become hot. Do not touch the Bottle Warmer until it has cooled down.

Device Operation

Power Button

Press this button [power-symbol] to turn on the bottle warmer. The power light will turn on to indicate that the bottle warmer is powered on. To turn off the bottle warmer, press the button again and the light will turn off.

Function Selection Button

Press this button [function-select-symbol] to select a function. This bottle warmer has 4 functions.

Fast Warming/Defrosting Function

This function quickly warms a bottle of milk in 3-7 minutes. The screen displays a timer countdown in minutes.

• Operation:
  1. Pour 40ml of distilled water into the bottle warmer. (It is recommended to use distilled water to prevent scale buildup.)
  2. Place the milk bottle and basket into the bottle warmer.
  3. Press the power button to turn on the device. The power light will illuminate. Then, press the “ ” button to choose the “Fast” function.
  4. Check the express warming reference table to determine how long the milk needs to be warmed, and use the “ + ” and “ - ” buttons to adjust the time as needed. The default heating time is 3 minutes. The bottle warmer will start working automatically 5 seconds after you have finished selecting the function.
  5. The bottle warmer will count down automatically, and the remaining heating time will be displayed on the screen. The device will beep to remind you when the milk is ready. Be sure to remove the bottle promptly to avoid over-heating.
  6. Before feeding, shake the milk well and make sure the temperature is suitable for feeding.
• Tips:
  • Always put the lid on while fast warming.
  • For taller bottles, do not cover the lid if it doesn't fit properly. Adjust the heating time a little bit longer if the lid cannot cover the bottle completely.
• Reference Table (Approximate Warming Times):

  Material	Initial Temp	Volume	Time
  Plastic	41℉/4℃	68℉/20℃	4 min
  Plastic	41℉/4℃	68℉/20℃	5.5 min
  Plastic	41℉/4℃	68℉/20℃	6 min
  Plastic	41℉/4℃	68℉/20℃	7 min
  Plastic	41℉/4℃	68℉/20℃	3 min
  Plastic	41℉/4℃	68℉/20℃	3.5 min
  Plastic	41℉/4℃	68℉/20℃	4.5 min
  Plastic	41℉/4℃	68℉/20℃	5 min
  Silicone	41℉/4℃	68℉/20℃	5 min
  Silicone	41℉/4℃	68℉/20℃	6 min
  Silicone	41℉/4℃	68℉/20℃	7.5 min
  Silicone	41℉/4℃	68℉/20℃	8.5 min
  Silicone	41℉/4℃	68℉/20℃	4 min
  Silicone	41℉/4℃	68℉/20℃	5 min
  Silicone	41℉/4℃	68℉/20℃	5.5 min
  Silicone	41℉/4℃	68℉/20℃	6 min
  Glass	41℉/4℃	68℉/20℃	3 min
  Glass	41℉/4℃	68℉/20℃	4 min
  Glass	41℉/4℃	68℉/20℃	5 min
  Glass	41℉/4℃	68℉/20℃	6 min
  Glass	41℉/4℃	68℉/20℃	2.5 min
  Glass	41℉/4℃	68℉/20℃	3 min
  Glass	41℉/4℃	68℉/20℃	4 min
  Glass	41℉/4℃	68℉/20℃	4.5 min
  Milk bag	41℉/4℃	68℉/20℃	2.5 min
  Milk bag	41℉/4℃	68℉/20℃	3.5 min
  Milk bag	41℉/4℃	68℉/20℃	4.5 min
  Milk bag	41℉/4℃	68℉/20℃	5 min
  Milk bag	41℉/4℃	68℉/20℃	2.5 min
  Milk bag	41℉/4℃	68℉/20℃	3 min
  Milk bag	41℉/4℃	68℉/20℃	3.5 min
  Milk bag	41℉/4℃	68℉/20℃	4.5 min

Note: The time listed on the reference chart is a recommendation ONLY and may not provide an accurate time due to different initial temp/bottle material/ambient temp etc that may impact the final milk temp. Take out the bottle in time to avoid overheating. If you find the milk is not warm enough, please place the bottle back into the appliance for an additional maximum of 0.5-1 minute of extra warming.

Overheating breast milk can cause valuable nutrients and vitamins to be lost.

Make sure not to exceed the maximum scale line of the bottle when warming milk.

24H Warming/Defrosting Function

This function heats milk at a slower speed (about an hour) to the set temperature and then keeps it warm for 24 hours. It can also be used to defrost a bottle of milk to a liquid state.

• Operation:
  1. Fill the chamber with distilled water up to the MAX line indicated on the bottle warmer. Then, place the baby bottle and basket into the bottle warmer.
  2. Press the “ ” button to choose the “24H” function. The default temperature is 37°C/98.6°F, and you can adjust the temperature you need by touching the “ + ” or “ - ” button. The bottle warmer will start working automatically in 5 seconds after you finish selecting the function.
  3. During heating, the screen will display the set temperature flashing in degree centigrade. The milk will be ready in about an hour, and the set temperature will then stay on.
  4. Before feeding, shake the milk well and make sure the temperature is suitable for feeding.
  5. The bottle warmer will precisely keep the milk/water at the target temperature for 24 hours in the "24H" function to fit every baby's preferences and to avoid overheating or being too cold. (It is not recommended to heat breast milk for too long.)

Food Warming Function

This function heats food to the desired set temperature in around 1.5 hours (frozen meat puree takes 3 hours) and keeps it at that temperature for up to 6 hours. The screen displays the set temperature and keeps flashing during heating. The screen will stay on and stop flashing after heating is completed.

• Operation:
  1. Pour distilled water into the bottle warmer up to the scale line indicated inside the bottle warmer.
  2. Put the baby food in a heat-resistant container and then put the basket and the container into the bottle warmer.
  3. Press the “ ” button to select the “ Food ” setting. The default temperature is 70°C/158°F, and you can also adjust the temperature you need by touching the “ + ” or “ - ” button. The bottle warmer will start working automatically in 5 seconds after you finish selecting the function.
  4. During heating, the screen will display the set temperature flashing in degree centigrade. The food will be ready in about 1.5 hours, and the set temperature will then stay on. (Frozen meat puree may take up to 3 hours.)
  5. Before heating and feeding, please remember to stir the food well and make sure the food can be heated evenly.
• Tips:
  • Make sure to stir the baby food during warming as it does not circulate automatically.
  • Be careful not to burn your fingers when holding the container/jar while stirring.

Sterilize Function

This function sterilizes feeding bottles and pacifiers by boiling water and steam.

• Operation:
  1. Pour 100-150ml of distilled water into the bottle warmer. It is recommended to use distilled water to prevent scale. Put the bottle shelf into the bottle warmer first, then put the bottles and pacifiers upside down. Put the top lid on.
  2. Press the “ ” button to choose the “Sterilize” function. The bottle warmer will automatically start sterilizing after 5 seconds when you finish selecting the function. Please take out the bottle/pacifier when the appliance beeps.
  3. Be careful not to get burned when taking the bottle out after sterilization.

Smart Memory Function

This bottle warmer has a smart memory function that remembers the last warming setting used for the next use.

General Usage Notes

• After plugging in the power, the bottle warmer will emit a "beep" sound to indicate that it is connected to power.
• Before connecting the power supply, ensure that the supply voltage matches the required voltage for the bottle warmer. If not, a transformer may be needed to adjust the voltage.
• The illustration below is specifically for the "Fast", "24H", and "Food" functions only. For information on how to use the "Sterilize" function, please refer to the detailed explanation above.
• At the "slow pace" setting (implied by 24H function description), you can warm your milk at a slow pace and keep it warm at the right temperature. For example, to warm a bottle of 4oz milk starting from room temperature, it will take 15-20 minutes. The warming time may be longer or shorter depending on the milk volume and initial temperature.

Cleaning and Maintenance

• Cleaning:
  1. Unplug the bottle warmer and let it cool down before cleaning.
  2. Do not immerse the working base in water for cleaning.
  3. It is recommended to use distilled water to prevent scale buildup. Acetic acid or other descalers can help you clean the scale efficiently.
• Descaling:

  To ensure the bottle warmer continues to work efficiently, it is recommended to descale it every four weeks.

  • Method 1: Mix 10g of citric acid cleaner with 200 ml/3.4oz of cold water to descale the bottle warmer. Turn on the bottle warmer, select the Sterilize FUNCTION, then wait for 2-3 minutes after boiling, and the descaling is completed.
  • Method 2: Mix 50ml/1.7oz of white vinegar with 100ml/3.4oz of cold water to descale the bottle warmer. Switch on the bottle warmer, select the MILK WARMING FUNCTION, and wait for 10 minutes. Leave the solution in the bottle warmer until all scale has dissolved.

  Notes for Descaling:

  • Never let the bottle warmer dry out during the descaling process.
  • Do not use other types of descalers, as they may damage the bottle warmer.

Troubleshooting

• Problem: The milk is still not warm enough after 3 minutes.
• Possible Cause/Solution: Make sure not to exceed the maximum scale line of the bottle when warming milk. Consider adjusting the heating time slightly longer.

Product Specifications

• Product Capacity: Can warm bottles of up to 200ml capacity.
• Usage: For indoor use only (For use in the USA).

About GROWNSY

GROWNSY - El mejor ayudante de los padres. GROWNSY se ha comprometido a permitir que los padres jóvenes de la nueva generación experimenten la belleza y la fuerza de las marcas internacionales, proporcionando una solución integral para satisfacer las necesidades de la vida de crianza de la nueva generación. En términos de conexión emocional con los consumidores, GROWNSY está dispuesta a ser una compañera en el camino de la crianza para las futuras madres, acompañándolas a través de ese suave tiempo juntas, acompañando a las madres novatas a través de los ajetreados días de guardería, y acompañando a los bebés para que crezcan sanos y felices día a día, haciendo de GROWNSY una marca orientada al crecimiento tangible de la madre y el bebé.

Muchas gracias por comprar con nosotros y depositar su confianza en nuestra marca.