ATOLL ST300 Signature Streamer

Welcome

Thank you for purchasing an ATOLL ST300 Signature Streamer, a product with exceptional audiophile performance. Please read this manual carefully to get the best experience from your streamer.

Safety Instructions

• Do not make any connections when the device is turned on.
• Install the appliance in a dry, well-ventilated place away from heat sources.
• Do not place anything on the Streamer.
• Avoid short circuits.
• Never connect two speakers in parallel to the same output.

User Advices

It is recommended to use high-quality cords to connect this appliance to other devices. Consult your specialist dealer for advice.

Included Items

• One ST300 Signature streamer.
• One power cord.
• One RCA cord.
• One remote control.
• Two antennas.
• This manual with the warranty certificate.

1. General Information

Your ATOLL Streamer is DLNA and UPnP compatible, allowing it to operate within a network with other devices. Read the "Getting Started" section (page 7) before powering on the unit.

The display shows the selected radio station logo, information about files on the network and USB sockets, and the volume level from 0 to 100.

For ease of use, download the ATOLL Signature app from the Apple Store or Google Play store.

Accepted Formats

• AAC (24-96 kHz 16 bits).
• AAC+ v1/HE-AAC.
• FLAC (44.1-96 kHz 16/24 bits).
• FLAC 192 kHz/16-24 bits (available on USB-A inputs, RJ45 link, and WIFI).
• MP3 (8-48 kHz 16 bits).
• WAV (22-96 kHz 16/24 bits).
• AIFF & ALAC.
• DSD64 & DSD128.
• MQA (Master Quality Authenticated)(*).

(*) The ST300 includes an MQA Core Decoder, which unfolds MQA files once to deliver better-than-CD quality. The first unfold recovers all direct music-related information, outputting at 88.2kHz or 96kHz. 'MQA' or 'MQA Studio' indicates decoding and playback of an MQA stream or file, ensuring sound identical to the source. 'MQA Studio' signifies playback of an MQA Studio file approved in the studio or verified by the copyright owner. MQA and the Sound Wave Device are registered trademarks of MQA Limited © 2016.

Cleaning

Before cleaning, switch off the appliance. Use a soft, dry cloth. Never use acetone, white-spirit, ammonia, or any abrasive cleaning agents. Do not attempt to clean inside the appliance.

Warranty Conditions

The guarantee is valid for two years from the date of purchase. Ask your dealer to fill out the warranty and keep it with your invoice. The guarantee applies only to appliances used correctly according to this owner's manual.

Technical Data

2. Connections

The rear panel features the following connections:

• 1) Analog stereo output (XLR line).
• 2) Input Analog 1.
• 3) Input Analog 2.
• 4) Optical output.
• 5) Coaxial output.
• 6) Optical 1 input.
• 7) Optical 2 input.
• 8) Coaxial 1 input.
• 9) Trigger output.
• 10) Coaxial 2 input.
• 11) Ethernet input (RJ45).
• 12) USB input (A type).
• 13) Power input.
• 14) ON/OFF switch.
• 15) WIFI connection antenna.
• 16) Bluetooth® connection antenna.

(1) These inputs can be configured in BY-PASS. See chapter 6, page 11.

(2) Trigger output: Used to control the switching on/off of any device equipped with a compatible Trigger input.

Detail of Functions

Front panel controls:

• 17) Menus control keys.
• 18) USB A type Input.
• 19) Display.
• a) BY-PASS indicator light.
• 20) Headphones output (3.5mm jack).
• 21) Volume control down and up (- and +).
• 22) ON/OFF key & standby indicator light.

(3) To avoid electrostatic shock, connect headphones when the device is off or on standby. Turn off the amplifier while using headphones.

Connecting Wi-Fi and Bluetooth® Antennas

Ensure the supplied Wi-Fi and Bluetooth® antennas are correctly installed before connection and use. Use the two supplied antennas or an antenna with a male connector.

3. ATOLL Remote Control

The remote control uses 2 lithium CR2032 (3V) batteries. Ensure the '+' side is facing up.

Note: Some keys may have different uses depending on the menus or context.

Keys available from the front panel:

• 17) Menus control keys.
• 21) Volume control + and -.
• 22) Standby mode.

Other Remote Control Functions:

• 23) Alphanumeric keys (0-9, A-Z). Quick press cycles through characters (e.g., '2' for a, b, c, 2).
• 24) HOME: Return to the main menu.
• 25) PLAY/PAUSE.
• 26) FAST FORWARDS: inactive.
• 27) PLAY NEXT TRACK.
• 28) STOP.
• 29) PLAY: Display current track or radio.
• 30) WPS: Quick Wi-Fi connection. Press simultaneously with your internet receiver's WPS button.
• 31) BACK: Return to previous menu.
• 32) FAST BACK: inactive.
• 33) OK: Validation key in menus.
• 34) Previous Track: Single press for previous track, double press for beginning of track. In menus: delete last character.
• 35) SHUF: Shuffle playback.
• 36) REP: Repeat track (single item) or album.
• 37) DISP: Change display mode.
• 38) MUTE: Mute key (not active on BY-PASS).
• 39) Input Selection keys: Coaxial 1, Coaxial 2, Optical 1, Optical 2, Line 1, Line 2, BY-PASS (hold 5 seconds).
• 40) FAV: Add or remove a track or radio from favorites.
• 41) IN/PR Keys: Control ATOLL Integrated or Preamp units.

4. Connecting Setup

This device can be used as a source (like a CD player) or as a preamplifier to control volume.

Source Mode

Use the ST300 Signature as a source directly linked to an Integrated or Preamp. BY-PASS mode should be active, indicated by the BY-PASS LED being lit.

Preamplifier Mode

Use the Streamer as a preamplifier directly connected to a power amplifier or active speakers. BY-PASS mode should be inactive, indicated by the BY-PASS LED being off.

Example: Connecting to an Integrated IN300 type amplifier. You can switch on every line IN of the integrated.

Trigger Link

This appliance is equipped with a Trigger output to switch ON/OFF compatible ATOLL amplifiers or other devices with a Trigger input.

Connect the Streamer's Trigger output to the amplifier's Trigger input using a 3.5mm (1/8") stereo male-to-male jack plug. When the Streamer comes out of standby, the amplifier will turn on. It will also turn off when the Streamer goes to sleep.

Note: When the system is operating, the ON/OFF button of your Amplifier must remain in the OFF (0) position. If the switch is in the ON position (I), the amplifier will work, but the Trigger function will not operate.

5. Preamp / BY-PASS Functions

Volume

Volume is managed using the buttons (21) on the front panel or the remote control. The volume level is displayed briefly and is always indicated at the top of the display. On startup, the volume remains at the last set level. Volume at zero mutes the device by switching the output relay.

Sources

Your appliance has 6 inputs (excluding USB, Media Server, Bluetooth®): Line 1, Line 2, Coaxial 1, Coaxial 2, Optical 1, Optical 2. These sources can be renamed using the ATOLL Signature application (Settings/Rename local inputs).

Note: The selected source is always followed by an asterisk (*) on the screen.

Connection: BY-PASS Assignment

For connection to a home cinema system, inputs can be assigned to BY-PASS mode. This function is only possible on Analog inputs 1 and 2. In this mode, volume management is inoperative on the selected input.

To activate BY-PASS: Select Analog input 1 or 2, then hold the BY-PASS button (39) on the remote control for 3 seconds. The BY-PASS LED (22) will illuminate. An input selected in BY-PASS mode will remain memorized even if the source is changed or the power is turned off.

To deactivate BY-PASS: Press the BY-PASS button on the remote control for 3 seconds.

6. Uses

Getting Started

Before switching on, connect the network cable (RJ45) to input (11). A wired connection is highly recommended over Wi-Fi for better results and performance.

Wait for the start-up screen before any manipulation. Use the navigation buttons (17) on the remote control or front panel to select menus. Upon first connection or network configuration changes, check the network settings. Incorrect settings may prevent functions like internet radios or media server access.

Available menus include: Playlists, Internet radio, USB, Media Server, Qobuz, Tidal, Deezer, HighResAudio, Spotify, Bluetooth, Analog 1 and 2, Coaxial 1 and 2, Optical 1 and 2, and Settings.

Network Configuration

Connecting an RJ45 cable automatically initiates the network link. If successful (indicator not blinking), your network is correctly configured.

1. Go to the "Settings" menu, then "Network connection".
2. Select the "Network Wizard" menu.
3. Choose the network type: "Automatic", "Wired", "Wireless", or "Hybrid".

• Automatic: Prioritizes wired connection. If wired, it uses wired. If no cable is connected, it switches to Wi-Fi.
• Wired: If the network cable is plugged in, the device indicates connection (symbol indicates wired link established). If not, configure manually by entering the IP address.
• Wireless: The appliance finds available Wi-Fi networks.

Advice: Use the WPS button for Wi-Fi connection. Press the WPS button on your internet receiver, then the WPS button (30) on the remote control. The display will show "WPS in progress" and then "connected". If WPS fails, press "scan" to see available networks, select yours, and enter the Wi-Fi key.

Enter the Wi-Fi security key in CAPITAL LETTERS without spaces. Confirm the password by pressing the "OK" button (33).

Alternative Connection via ATOLL Signature App:

1. Download the ATOLL Signature app on your smartphone or tablet.
2. Turn on your network player.
3. On your smartphone, go to Settings and connect to the "Softap" Wi-Fi network (appears a few minutes after turning on the player).
4. Launch the ATOLL Signature application.
5. In Settings / Network configuration / Wireless configuration / Scan, select your internet box and enter the Wi-Fi password.
6. Reconnect your smartphone to your internet box's Wi-Fi network.

A symbol indicates that the wireless link is established or Softap is available.

Network Info

This menu displays network information: type, IP address, Mask, Gateway, DNS, etc.

Languages

Select the menu language: English, German, Spanish, French, Italian, Netherlands, Russian, Polish.

Return to Play-Screen Time

Set the standby time for the main screen.

Rename Entries

Rename auxiliary, coaxial, and optical inputs for easier identification.

Version

Displays the installed software version.

Firmware Update

Check for updates by selecting "Check for update". If an update is available, the device will launch it automatically. Allow the device to restart.

Power Management

Configure automatic standby settings:

• Delay before standby: Choose 5, 10, 15, or 30 minutes of inactivity before standby.
• Max inactive playback time: Choose 1, 8, or 24 hours of inactivity before standby.
• Display intensity: Adjust display brightness (off, low, medium, high). In 'off' mode, the display turns off after a few seconds and reactivates temporarily with button presses. This can also be set using the DISP button (37).

Return to Factory Settings

Restarts the device with factory settings. The device will restart in English, and some menus like PlayQueue or Favorites may be refreshed.

Streaming Audio Quality

Choose file quality: 24 bits/192 kHz or 24 bits/96 kHz. For limited internet speeds, favor 24 bits/96 kHz to preserve bandwidth.

Volume of the Digital Output

Configure variable or fixed digital output signal to adjust volume with an external DAC.

Device ID

Name the device for visibility in systems like Roon.

Balance

Adjust left-right balance using the volume keys. The balance setting is stored.

ATOLL App

A free application for smartphones and tablets is available on the Apple Store (iOS) or Google Store (Android) under the name "ATOLL Signature". Ensure your smartphone is on the same Wi-Fi network as your Streamer. Your device will appear upon launching the app; select it. The app displays radio station logos, audio streams, volume, etc. You can navigate menus and adjust analog volume. The app can wake the device from standby by starting playback.

Control from a Computer

Control your network drive from a computer by typing its IP address followed by "/webclient" in your internet browser's search bar (e.g., 192.168.xxx.xxx/webclient). The IP address is found in "Settings / Network info". You can also rename your network drive by typing only its IP address in the browser.

This menu also allows choosing file quality (24 bits/192 kHz or 24 bits/96 kHz). For limited internet speeds, favor 24 bits/96 kHz to preserve bandwidth.

Search Function

Press "Search", then "Looking for", enter your search query, and validate with "OK". Specify the search scope ("All", "Song", "Album", "Artist", "Playlist") and the services to search within ("Qobuz", "Tidal", "Deezer"). Start the search by pressing "Search".

Playlists

Create playlists with music tracks or albums available on your network. Tracks from streaming services cannot be added to these playlists.

There are three playlist menus:

1. PlayQueue: A temporary playlist where tracks can be added sequentially and reordered. Tracks in PlayQueue are deleted when the device is switched off.
2. Playlists: Create custom playlists. Press "Create new playlist", name it, and press "OK". All playlists appear in the menu. You can rename them, activate random or repeat play, cancel them, or add them to a collection using the app.
3. Collection: Gather one or more playlists. Create a collection, then use the app to choose a playlist and add it to a collection.

Note: Tracks will not be readable if the device is not connected to the network or if the music source (computer, NAS) is offline.

To remove a track or radio from "Favorites", select it and press the REM FAV button (40).

Internet Radio

Access approximately 100,000 radio stations and podcasts.

• Favorite Menu: Easily accessible selection of radio stations. Add a station to favorites by pressing the FAV button (40) while it's playing. Press again to remove.
• Other selection criteria: History, Recommendations, Local stations, Popular stations, Trending, High quality, New stations, Filter, Search, Podcasts.
• Filter: Search stations by location, language, or genre.
• Podcasts: Access podcasts via Favorites, History, popular podcasts, Trend, Filter, or Search.
• Custom Radio: Add your own radio stations using their URL. These will appear in this menu.
• Suggest Content: Submit a new radio station to the Airable platform (free service).

Front & Rear USB

Select one of these inputs to read music files from a USB key or Hard Disk. Supported file systems: FAT32, NTFS, EXT 2/3/4.

Media Server

Access files on your network (NAS, computer, router). You can choose to browse: Music, Photos, or Videos. Only music files are supported.

Music can be selected by criteria such as: Files, All music, Playlists, Album, Artist, Genre, Composer (depending on metadata in original files). Tracks can be added to playlists.

Streaming Services

Spotify Connect

Access Spotify via the ATOLL Signature App. Use your phone, tablet, or computer as a remote control. Learn more at www.spotify.com/connect. Spotify Software is subject to third-party licenses found at https://www.spotify.com/connect/third-party-license.

Tidal Connect

Stream directly from the Tidal App by selecting your device.

Qobuz / Tidal / Deezer / HRA

Direct access to these streaming services is available via the ATOLL Signature app. On first use, enter your username and password. For Tidal, enter your username and password in the app and press "log in".

Once your account is validated, you can access your playlists, favorites (albums, tracks, artists), and purchases.

Roon & Audirvana

Your network player is fully compatible with Roon and Audirvana. Before connecting to Roon for the first time, set the "Settings: Device ID" field to your device's reference (e.g., ST200, MS120, SDA200, ST300, SDA300).

Bluetooth®

Receive audio signals from any Bluetooth® enabled device (smartphone, tablet, computer).

First Pairing

Activate Bluetooth® on your sending device and select 'ATOLL Signature' (default name) from its list. Then, select the Bluetooth® input on the ST300 Sig via the app, front panel, or remote. Once paired, switch to playback mode in the ST300 Sig's Bluetooth® menu to play audio. Devices can be disconnected or unpaired.

Associating Another Device

Disconnect the current device first. Activate Bluetooth® on the new device, then select it in the streamer's Bluetooth® menu. Signal quality depends on the transmitter's power and distance; maintain a distance of up to 5 meters for optimal reception without signal cuts.

7. Troubleshooting Table

Warranty Form

Present this to your dealer and include it with your purchase invoice when sending the appliance to the service center.

ATOLL ELECTRONIQUE
Bd des Merisiers
50370 BRECEY
FRANCE

Warranty Conditions

This device is designed for complete satisfaction. ATOLL ELECTRONIQUE's warranty is two years from the date of purchase, provided the date and stamp of the seller are authentic. Keep your proof of purchase (invoice) with this properly filled coupon.

The warranty, as well as the terms of service, should be specified at the time of purchase by your dealer. They will advise you in case of faulty behavior or failure.

This warranty covers labor and replacement of parts acknowledged to be faulty, excluding normal wear and tear. Devices showing signs of disassembly, drops, immersion, abnormal voltage, or any damage resulting from use contrary to the manual's instructions, automatically forfeit the warranty.

Date of purchase: ____________________

Place of purchase: ____________________

Buyer signature: ____________________

Dealer's Stamp: ____________________

ATOLL ELECTRONIQUE is a French company that designs, manufactures, and commercializes all its products.