VEVOR
TOUGH TOOLS, HALF PRICE
Technical Support and E-Warranty Certificate https://www.vevor.com/support
LIFTING FLAT TABLE USER MANUAL
VEVOR is committed to providing tools with competitive prices. Phrases like "Save Half" or "Half Price" represent an estimate of potential savings compared to major brands and do not necessarily cover all product categories. Customers are advised to verify savings carefully when placing an order.
Product Information
Product Name: Lifting Flat Table
Model Numbers: ZWE-DDJ-SS-09, ZWE-DDJ-SS-10
This is the original instruction manual. Please read all instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product is subject to the item received. VEVOR will not provide separate notification for future technology or software updates.
Diagram showing the VEVOR Lifting Flat Table with its dual metal legs and tabletop.
⚠️ WARNING: Please read this manual carefully before using the product. Failure to do so may result in serious injury. SAVE THIS MANUAL.
ASSEMBLY PRECAUTIONS
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard, and smooth surface capable of safely supporting the Lifting Flat Table.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts on a clear work area.
USE PRECAUTIONS
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
- This product is not a toy. Do not allow children to play with or approach this item.
- Use as intended only. Do not sit or stand on the table.
- Inspect before every use. Do not use it if parts are loose or damaged.
- Use only on flat, level, and hard surfaces.
TECHNICAL SPECIFICATIONS
| Model | ZWE-DDJ-SS-09, ZWE-DDJ-SS-10 |
|---|---|
| Adapter Rating(s) | 100-240V~, 50/60Hz, 1.5A |
| Main Material | Steel + Board |
| Color | Brown + Black |
| Product Dimensions (L x W x H) | 1200 x 600 x 1145 mm |
| Packing Size (L x W x H) | 1275 x 670 x 95 mm |
| Net Weight (kg) | 25.45 |
| Gross Weight (kg) | 28.35 |
PACKAGE CONTENTS
- A x2: Flat metal bars, likely feet.
- B x1: Leg assembly with motor housing.
- C x1: Leg assembly.
- D x2: Horizontal support beams.
- E x2: Side wing brackets.
- F x1: Tabletop panel.
- G x1: Drawer assembly.
- H x1: Hexagonal drive rod.
- I x1: Motor unit.
- J x1: Drawer front support.
- K x3: Screws (ST4*25).
- L x1: Control box.
- M x1: Power adapter.
- N x34: Screws (M6*13).
- O x2: Screws (ST4*12).
- P x2: Screws (M4*40).
- Q x8: Screws (M6*35).
- R x1: Drawer handle.
- S x1: Cable management clip.
- T x4: Cable management clips.
- U x1: Allen wrench.
- V x2: Cable management hooks.
ASSEMBLY STEPS
STEP 1 Foot installation
Attach the feet (A) to the bottom of the leg assemblies (B and C). Secure using eight (8) M6*35 screws (Q).
Diagram showing feet (A) being attached to leg assemblies (B, C) with screws (Q).
STEP 2 Motor installation
First, insert the motor (I) from the end of the hexagonal rod (H) without a bump into the other end with a bump. Then, insert the convex end of the motor into leg assembly (B) along with the motor. Tighten the motor on leg B with two (2) M4*40 screws (P).
Diagram showing motor (I) and hexagonal rod (H) being inserted into leg assembly (B) and secured with screws (P).
STEP 3 Drive rod installation
After completing the previous step, insert leg assembly (C) into the hex stick (H). If the holes are misaligned, hold the motor by hand and adjust the hex rod (H) to rotate slightly so that the hex rod can be inserted into leg assembly (C).
Diagram showing leg assembly (C) being connected to the hexagonal rod (H) extending from leg assembly (B).
STEP 4 Beam installation
Attach the horizontal support beams (D) between the leg assemblies (B and C). Secure using twelve (12) M6*13 screws (N).
Diagram showing horizontal beams (D) connecting leg assemblies (B, C) and secured with screws (N).
STEP 5 Side wing installation
Attach the side wing brackets (E) to the frame. Secure using four (4) M6*13 screws (N).
Diagram showing side wing brackets (E) being attached to the frame with screws (N).
STEP 6 Panel installation
Place the tabletop panel (F) onto the assembled frame. Secure the tabletop using eight (8) M6*13 screws (N). Attach the drawer handle (R) to the drawer assembly (G) using one (1) M6*13 screw (N).
Diagram showing tabletop (F) being placed on the frame and secured with screws (N). Also shows drawer handle (R) attached to the drawer with screw (N).
STEP 7 Drawer installation
Assemble the drawer components (G, J) using three (3) ST4*25 screws (K). Attach the assembled drawer to the underside of the tabletop using eight (8) M6*13 screws (N).
Diagram showing drawer assembly (G, J) being put together with screws (K), and then the completed drawer being attached under the tabletop with screws (N).
STEP 8 Accessories installation
Install the control box (L) and accessories. Attach the control box (L) using two (2) ST4*12 screws (O). Attach cable management clips (S, T) and hooks (V) using screws (N).
Diagram showing the control box (L) mounted with screws (O), and cable management items (S, T, V) attached with screws (N).
STEP 9 Line connection
Connect the motor cables to the control box (L). Connect the control box (L) to the power adapter (M). Ensure all connections are secure.
Diagram illustrating the connection of motor cables to the control box (L) and the power adapter (M).
Height Adjustment Controller Operation
Diagram of the controller with labels for LED Display, UP Key, Down Key, Memory Key 1, Memory Key 2, Memory Key 3, and Set Key.
- LED Display: Press any key once to wake up the LED display.
- UP Key (⬆️): Press and hold the UP key to raise the desk.
- Down Key (⬇️): Press and hold the DOWN key to lower the desk.
- Memory Key (1, 2, 3): Press the number key to recall a saved height.
- Set Key (S): Press the Set key once, then press a memory key (1, 2, or 3) to save the current height.
Initialization Process
You must complete the Initialization Process to reset your desk before using it for the first time. After running to the lowest height position, press and hold the Down Key (⬇️) for 7 seconds. When the LED screen displays "rst" and "E-1" flash alternately, release the Down Key (⬇️), and press and hold the Set Key (S) again. After the desktop runs down to the lowest mechanical zero point, it will move up by 5mm. The LED screen will display the lowest height value, and the reset is completed.
Lock Key (?)
Press and hold the Set Key (S) for 3 seconds. The LED screen will display "SET", then "OFF". To unlock, press and hold the Set Key (S) for 3 seconds again; the LED screen will display the height value.
Restore Factory Settings (S)
Press and hold the Set Key (S) for 9 seconds. When the LED screen displays "FAC", release the Set Key (S) and press it again to restore factory settings.
Error Code Instructions
| Error Code | Reason | Solution |
|---|---|---|
| Err | Communication line sequence between the manual controller and the control box is wrong. | Reset by pressing the long key until the LED screen displays the minimum height (70.5) and the alarm is released. |
| E-1 | System does not save the current position; LED screen flashes alternately to display "E-1". | Reset by pressing the long key until the LED screen displays the minimum height (70.5) and the alarm is released. |
| E-2 | Motor is locked; LED displays E-2. | / |
| E-5 | Motor connection line is disconnected/loosened; LED screen flashes alternately to display "E-5". | 1. Check connection lines between motors and controller to ensure they are firm. 2. Reset by long pressing the Down Key (⬇️) until the LED screen displays the minimum height (70.5), and remove the alarm. |
| ovr | Load exceeds the set value; LED screen flashes to display "ovr". | 1. Normal load shall be controlled below 120KG. 2. When current exceeds 4A, overload protection will be triggered. Remove excess weight and power cycle the controller. |
| hot | Internal temperature of the controller exceeds 60 ± 5 degrees; LED displays "hot". | / |
| vol | Input voltage exceeds 34V; LED displays "vol". | 1. When voltage exceeds 32V, the controller powers off and the LED screen is black. 2. When voltage drops to 32V, the system will automatically reply and display the real-time height. |
| hot (motor) | Motor runs continuously for 5min; LED displays "hot". Can work normally after waiting for 10min. | 1. Uninterrupted operation means the operation interval is within 3s. 2. This alarm can also be removed when the control system is powered on again. |
| E-3 | During operation, suddenly blocked; LED screen flashes "E-3", stops action, and runs 30mm in the opposite direction. | It shall be ensured that the table will not vibrate significantly, bump into obstacles, or tilt during operation. |
COMPLETION
Diagram showing the fully assembled VEVOR Lifting Flat Table.
Company Information
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E, RANCHO CUCAMONGA, California, 91730 United States of America
EU Representative: SHUNSHUN GmbH, Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Germany
UK Representative: Pooledas Group Ltd, Unit 5 Albert Edward House, The Pavilions, Preston, United Kingdom
Contact Us â Official VEVOR Support
