Yaheetech Cat Tree Tower

Model #: 591835

Assembly Instructions

Usage and Safety Instructions

Please read the following instructions carefully and use the product in accordance with the manual.
Keep the instruction well. Please give the product along with the Installation and Operating Instructions if it is for other people to use.
The warnings, cautions, and instructions listed in this manual may not cover all possible situations that may arise when using the product. Please contact Yaheetech via email info@yaheetech.com.cn if you need further information or help.
This product is not a climbing frame for children's play, which could result in injury. Please do not leave children unattended.
Check the item for possible damages before use. Do not use it if it is bent, cracked, or damaged.
Improper loading can cause a tilt of the item.
The normal functioning of the product can be guaranteed when it is in a vertical and horizontal position. Please always position the product on a level surface.
Do not place the product near the fire or heat sources! Caution: Fire Hazard.
Be careful of your hands when setting up! Yaheetech recommends wearing protective gloves for assembly.
Do not use corrosive cleaners for cleaning.

Safety Illustrations:

[Illustration: Stacked wooden planks with a red 'X' over them, indicating not to stack items this way.]
[Illustration: Two figures assembling a product correctly, with a checkmark.]
[Illustration: Two figures struggling to lift a heavy item, with a red 'X' over it, indicating caution with loading.]
[Illustration: Two figures assembling a tall structure correctly, with a checkmark.]

Parts List

[Part 1] M8x80 screw x1
[Part 2] M8x14 screw x2
[Part 3] M8x30 screw x16
[Part 4] M8x35 screw x10
[Part 5] M8x55 screw x1
[Part 6] Small platform x4
[Part 7] Short post x3
[Part 8] Condo box x1
[Part 9] M8x35 screw x1
[Part 10] Ramp x1
[Part 11] Large top platform x1
[Part 12] Large side platform x1
[Part 13] Base x1
[Part 14] Base x1
[Part 15] Medium platform x2
[Part 16] Medium post x1
[Part 17] Long post x1
[Part 18] Spring x2
[Part 19] Screw x1
[Part 20] Rope post x3
[Part 21] Rope post x1
[Part 22] Screw x8
[Part 23] Allen key x1
[Part 24] Toy ball x1
[Part 25] Toy ball x1

Assembly Steps

Step 1

Attach the base [Part 13] to the first upright post [Part 4] using one [Part 1] (M8x80 screw) and eight [Part 3] (M8x30 screws). Use the [Part 23] (Allen key) for tightening.

[Illustration: Base plate being attached to a post with screws.]

Step 2

Attach the base [Part 14] to the second upright post [Part 4] using one [Part 1] (M8x80 screw) and eight [Part 3] (M8x30 screws). Use the [Part 23] (Allen key) for tightening.

[Illustration: Base plate being attached to a post with screws.]

Step 3

Connect three short posts [Part 7] and two medium platforms [Part 15] to the base assembly. Secure them using four [Part 3] (M8x30 screws) and one [Part 2] (M8x14 screw). Also, attach one [Part 9] (M8x35 screw).

[Illustration: Attaching posts and platforms to the base structure.]

Step 4

Attach one ramp [Part 10] to the base assembly using one [Part 2] (M8x14 screw) and two [Part 3] (M8x30 screws).

[Illustration: Attaching a ramp to the base.]

Step 5

Assemble the first level. Attach one small platform [Part 6] to the base assembly using one [Part 5] (M8x55 screw) and four [Part 3] (M8x30 screws). Then, attach one medium post [Part 16] and one rope post [Part 20].

[Illustration: Building the first tier with a platform, posts, and a rope post.]

Step 6

Assemble the second level. Attach another small platform [Part 6] to the structure. Secure it with two [Part 3] (M8x30 screws), two short posts [Part 7], one ramp [Part 10], and one [Part 19] (screw).

[Illustration: Adding a second platform, posts, and a ramp to the structure.]

Step 7

Attach the condo box [Part 8] to the structure using one [Part 4] (M8x35 screw) and one [Part 20] (screw). Note: Diagram suggests [Part 20] is used as a screw here.

[Illustration: Attaching a condo box to the cat tree.]

Step 8

Attach two small platforms [Part 6] to the structure. Secure them with two [Part 8] (screws), one [Part 20] (screw), and three [Part 22] (screws). Note: Diagram suggests [Part 8] and [Part 20] are used as screws here.

[Illustration: Attaching platforms to the upper levels.]

Step 9

Attach the large top platform [Part 11] to the structure using one [Part 3] (M8x30 screw).

[Illustration: Attaching the uppermost platform.]

Step 10

Attach three upright posts [Part 4] to the structure.

[Illustration: Adding vertical posts to the structure.]

Step 11

Attach one rope post [Part 21] and one long post [Part 17] to the structure using four [Part 4] (M8x35 screws).

[Illustration: Attaching rope posts and a long post.]

Step 12

Attach the side large platform [Part 12] and the top large platform [Part 11] to the structure using one [Part 3] (M8x30 screw) and one [Part 12] (screw). Note: Diagram suggests [Part 12] is used as a screw here.

[Illustration: Finalizing the top structure with platforms.]

Step 13

Attach the toy ball [Part 24] and toy ball [Part 25] to the structure.

[Illustration: Attaching hanging toys.]

Customer Feedback

Thank you for purchasing a Yaheetech product!

At Yaheetech, we are dedicated to bringing you the best online shopping experience and making your life comfortable. We pride ourselves on an integrated supply chain team that works meticulously to deliver you products and service with greatest value. Our networks span across the US, the United Kingdom, Germany, France and six more European countries. It is always our belief that how customers view our business and service ultimately defines our brand.

So, how did we do? Please let us know by making an online remark about it.

[Feedback Option: Good job. Would you like to share your experience to assist others with their shopping decisions?]

[Feedback Option: Not good. Can you give us a chance to fix the problem?]

	Yaheetech 67-inch Cat Tree Assembly Instructions Step-by-step guide for assembling the Yaheetech 67-inch Cat Tree Tower, including a detailed parts list, safety warnings, and contact information.
	Yaheetech 591923 Cat Tree Tower Assembly Instructions Detailed assembly instructions and safety information for the Yaheetech 591923 Cat Tree Tower. Learn how to safely build your pet's new favorite furniture.
	Yaheetech 592647 Ocean-Themed Cat Tree Assembly Instructions Comprehensive assembly guide for the Yaheetech 592647 Ocean-Themed Cat Tree. Features step-by-step instructions, parts list, safety warnings, and customer support information for this multi-level cat tower.
	Yaheetech 592503 Cat Tree Assembly Instructions Detailed assembly instructions for the Yaheetech 592503 cat tree. Includes parts list, step-by-step guidance, and safety information for assembling this multi-level cat tower.
	Yaheetech Cat Tree Assembly Instructions Comprehensive guide for assembling the Yaheetech Cat Tree, featuring a hammock, scratching posts, and perches. Includes parts list, step-by-step instructions, and safety recommendations.
	Yaheetech 592057 Cat Tree Assembly Instructions Detailed assembly instructions for the Yaheetech 592057 cat tree. Learn how to build your cat's new activity tower with clear steps and part identification.
	Yaheetech 615090 Cat Tree Assembly Instructions Comprehensive assembly guide for the Yaheetech 615090 cat tree, detailing parts, step-by-step instructions, safety precautions, and care recommendations.
	Yaheetech Cat Tree Assembly Instructions and Safety Guide Comprehensive guide for assembling the Yaheetech cat tree, including a detailed parts list, step-by-step instructions, and essential safety information in multiple languages.