Manuals+

Technical Datasheet

DV8 BATH FILLER

SKU: DVBF

TECHNICAL DRAWING

Diagram showing the dimensions of the DV8 Bath Filler. The main view displays a faucet with two handles and a spout. Dimensions indicated are: 76mm from the base to the top of the handles, 180mm width across the main body, and 232mm total width. A side view of one of the faucet heads shows a maximum angle of 35 degrees and a G3/4" thread connection, with a height of 112mm. A top-down view of the base shows a width of 160mm.

Weight 0.0077 m³
Range DV8

Dimensions: are in millimetres except thread sizes which are BSP imperial.

NOTES

  • Our guarantee is subject to the product having been installed, used and maintained in accordance with our instructions.
  • All working parts (such as hinges, ceramic disks, cartridges, seals and cistern fittings), which are subject to normal wear and tear, are covered for 36 months from proof of purchase date. This excludes seats, which are covered for 12 months.
  • Our guarantee applies to the original purchaser and is non-transferable. Our guarantee is only applicable in the UK and ROI.
  • This does not affect your statutory rights.
  • Information is provided for guidance only and is non-binding. All measurements are approximate and subject to standard tolerances. We reserve the right to change product specifications without prior notification.