Technical Datasheet
FLITE BATH FILLER IN BRUSHED BRASS
SKU: FLBFBB
TECHNICAL DRAWING
Diagram showing the Imex Flite Bath Filler. Key dimensions are indicated:
- Height: 130 mm
- Width: 160 mm
- Thread size: 2-G3/4"
- Base width: 236 mm
- Overall height: 155.5 mm
- Spout height: 110 mm
- Spout reach: 57 mm
- Maximum projection: 35 mm
Dimensions are in millimetres except thread sizes which are BSP imperial.
| Weight | 0.0139 m³ |
| Range | Flite |
| Colour | Brushed Brass |
NOTES
Our guarantee is subject to the product having been installed, used and maintained in accordance with Imex instructions. All working parts (such as hinges, ceramic disks, cartridges, seals and cistern fittings), which are subject to normal wear and tear, are covered for 36 months from proof of purchase date. Seats are covered for 12 months. The guarantee applies to the original purchaser and is non-transferable. It is only applicable in the UK and ROI. This does not affect your statutory rights. Information is provided for guidance only and is non-binding. All measurements are approximate and subject to standard tolerances. Imex reserves the right to change product specifications without prior notification.