Notice
1. Follow the installation instructions. Please confirm all accessories are preset before installation.
2. Do not fully tighten the screws during initial assembly. Fully tighten screws only once all pieces which are correctly assembled.
3. If you encounter any problems during installation, please contact customer service.
Product Overview
The YITAHOME Console Table is a modern furniture piece designed for hallways or entryways. It features a rectangular top supported by decorative, curved metal legs that form an elegant, symmetrical pattern. A lower shelf provides additional storage or display space.
Parts and Hardware List
Please verify all parts and hardware are present before beginning assembly.
Components:
- 1: Top Shelf
- 2: Bottom Shelf
- 3: Curved Support (x4)
- 4: Curved Support (x4)
- 5: Curved Support (x4)
- 6: Curved Support (x4)
- 7: Top Support Bar (x2)
- 8: Base Support Bar (x2)
Hardware:
| Identifier |
Description |
Quantity |
| A |
M6x28mm Screw |
14 + 2 pcs |
| B |
M6x35mm Screw |
4 + 1 pcs |
| C |
M6x50mm Screw |
4 + 1 pcs |
| D |
(Small part/washer) |
4 pcs |
| E |
Allen Wrench |
1 pc |
| F |
4x35mm Screw |
2 + 1 pcs |
| G |
Ø6x30mm Screw |
2 + 1 pcs |
| H |
(Small part/washer) |
2 pcs |
| I |
M6x25mm Screw |
8 + 1 pcs |
STEP 1: Attach Top Support Bars to Base
Action: Attach the two top support bars (7) to the two base support bars (8). Ensure the side with two holes on the base support bars (8) is facing upwards.
Hardware Used:
Instruction: Tighten screws to 70%.
STEP 2: Attach Curved Supports to Base and Top Shelf
Action: Attach the curved supports (3 and 5) to the base support bars (8) using screws A. Then, attach the other ends of these curved supports to the underside of the top shelf (1) using screws I.
Hardware Used:
- A: M6x28mm Screw (2 pcs)
- I: M6x25mm Screw (8 pcs)
Instruction: Tighten screws to 70%.
STEP 3: Attach Remaining Curved Supports
Action: Attach the remaining curved supports (6) to the underside of the top shelf (1).
Hardware Used:
Instruction: Tighten screws to 70%.
STEP 4: Connect Structure to Base
Action: Attach the assembled curved structure to the main base (1). This step involves connecting the lower parts of the curved supports to the base.
Hardware Used:
- B: M6x35mm Screw (4 pcs)
- H: Small part/washer (2 pcs)
Instruction: Fully tighten all the screws.
STEP 5: Attach Bottom Shelf
Action: Attach the bottom shelf (2) to the lower part of the console table structure.
Hardware Used:
- A: M6x28mm Screw (4 pcs)
- D: Small part/washer (4 pcs)
Instruction: Fully tighten all the screws.
STEP 6: Final Tightening and Safety
Action: Perform final tightening of all screws. Install anti-tip accessories to secure the unit to the wall.
Hardware Used:
- F: 4x35mm Screw (2 pcs)
- G: Ø6x30mm Screw (2 pcs)
Instruction: Installation Completed.
Attention: For safety and stability, it is recommended to secure the anti-tip accessories to the wall to prevent tipping, injury, and property damage. ⚠️
Contact Information
For any questions regarding the installation of YITAHOME® products, please contact customer service:
- Phone: +1(888)-717-8084 (Mon-Fri 8:00 AM-16:30 PM PST / Saturday 8:00 AM-12:00 PMPST)
- Email: after-sale.cs@hotmail.com
Alternative Contact Method (for Amazon.com orders):
- Log into your Amazon account.
- Navigate to "Your Orders" and find the purchase.
- Click on "Contact Seller".
