YITAHOME Assembly Instructions
Notice
- Follow the installation instructions. Please confirm all accessories are preset before installation.
- Do not fully tighten screws during initial assembly. Fully tighten screws only once all pieces are correctly assembled.
- If you encounter any problems during installation, refer to two solutions: Follow the installation video tutorial on the Amazon product page or contact customer service.
- Extra spare hardware is provided; please rest assured to assemble. Parts marked with "+" are the spare parts.
Parts List
| Item No. | Part Description | Quantity |
|---|---|---|
| A | Small screw | X30 +3 |
| B | Medium screw | X30 +3 |
| C | Long screw | X16 +1 |
| D | Drawer slide screw (Φ3.5*14mm) | X40 +4 |
| E | Foot/Glide | X4 |
| F | Small bracket | X1 |
| G | Panel connector screw | X8 +1 |
| H1 | Long dowel (300mm) | X2 |
| H2 | Short dowel | X2 |
| I | Screw (Φ5*40mm) | X8 +3 |
| J | Screw (Φ3.5*14mm) | X8 +2 |
| K | Screw (Φ3.5*35mm) | X8 +5 |
| L | Wall mounting strap/component | X2 |
| 1 | Top panel | X1 |
| 2 | Shelf panel | X1 |
| 3 | Base panel | X1 |
| 4 | Side panel | X2 |
| 5 | Side panel | X1 |
| 6 | Side panel | X1 |
| 7 | Side panel | X2 |
| 8 | Drawer side panel | X1 |
| 9 | Drawer side panel | X1 |
| 10 | Drawer slide (cabinet member) | X2 |
| 11 | Drawer slide (cabinet member) | X2 |
| 12 | Drawer front/back panel | X1 |
| 13 | Drawer front/back panel | X1 |
| 14 | Back panel | X1 |
| 15 | Back panel | X1 |
| 16 | Drawer front/back panel | X1 |
| 17 | Drawer slide (drawer member) | X1 |
Explosion Diagram
An exploded view illustrating the assembly of a nightstand. The diagram shows the main components: Part 1 (top panel), Part 3 (base panel), Parts 4, 5, 6, 7 (side panels forming the cabinet structure), Parts 14 and 15 (back panels). Drawer components include Parts 8, 9, 12, 13, 16. Drawer slides are represented by Parts 10, 11 (cabinet members) and Part 17 (drawer member). Part E indicates the feet, and Part L is for wall mounting.
Assembly Steps
Step 1
Hardware: A (8 pcs), B (8 pcs), C (2 pcs), I (8 pcs), 3 (1 pc), 4 (2 pcs), 5 (2 pcs).
Attach side panels (4, 5) to the base panel (3) using screws A and B. Insert dowels I into designated holes. A close-up view shows screw A being inserted into a hole. ⚠️ Attention: Quick installation screws need to be fully inserted into the hole position before tightening.
Step 2
Hardware: A (6 pcs), B (6 pcs), C (6 pcs), 2 (1 pc), 6 (1 pc), 7 (2 pcs).
Attach side panel (6) to shelf panel (2) using screws A and B. Attach side panel (7) to panel (6) using screws C. Close-up views show screw insertion. ⚠️ Attention: Quick installation screws need to be fully inserted into the hole position before tightening.
Step 3
Hardware: 14 (1 pc), 15 (1 pc).
Insert back panels (14, 15) into the grooves of the assembled cabinet structure. Arrows indicate the direction of insertion.
Step 4
Hardware: A (8 pcs), B (8 pcs), C (8 pcs), 1 (1 pc).
Place top panel (1) onto the assembled cabinet structure. Secure it to the side panels using screws A, B, and C. Close-up views show screw insertion. ⚠️ Attention: Quick installation screws need to be fully inserted into the hole position before tightening.
Step 5
Hardware: D (8 pcs), H1 (1 pc), H2 (2 pcs).
Install drawer slides. Attach cabinet members of the drawer slides (components D, H1, H2) to the inner sides of the cabinet panels using screws D. A close-up view shows the slide attachment mechanism.
Step 6
Hardware: A (4 pcs), B (4 pcs), D (4 pcs), K (4 pcs), H1 (1 pc), 8 (1 pc), 10 (1 pc), 11 (1 pc), 13 (1 pc), 16 (1 pc).
Assemble drawer boxes. Connect drawer side panels (8, 10, 11) to drawer front/back panels (13, 16) using screws A, B, D, K, and dowels H1. Close-up views show screw insertion. ⚠️ Attention: Quick installation screws need to be fully inserted into the hole position before tightening.
Step 7
Hardware: A (4 pcs), B (4 pcs), D (4 pcs), K (4 pcs), H1 (1 pc), 9 (1 pc), 10 (1 pc), 11 (1 pc), 12 (1 pc), 17 (1 pc).
Assemble drawer boxes. Connect drawer side panels (9, 10, 11, 12) to drawer front/back panels (10, 11, 12, 17) using screws A, B, D, K, and dowels H1. Close-up views show screw insertion. ⚠️ Attention: Quick installation screws need to be fully inserted into the hole position before tightening.
Step 8
Insert the assembled drawers into the cabinet. The diagram shows drawers being slid into their respective openings within the main cabinet structure.
Step 9
Hardware: D (16 pcs), F (1 pc), G (8 pcs).
Attach the ? LED Tape. Remove the 3M adhesive from the back of the light strip, stick it along the cabinet body, and then fix it with Part H (fasteners D and G are shown in the diagram for securing).
Step 10
Hardware: D (8 pcs), E (4 pcs), J (8 pcs).
Attach the feet (E) to the bottom of the cabinet using screws D and J. The diagram shows the underside of the nightstand with feet being secured.
Step 11
Hardware: L (2 pcs), L1, L2, L3, L4, L5.
Wall mounting instructions: Fix strap component L2 to the back of the nightstand using L5. Drill holes on the wall according to L2's spacing, insert wall plugs L3, and secure L2 to the wall with L4. Use strap L1 to link and fix the two L2 components. ⚠️ Attention: There is a protective film on the surface of the bright panel; please gently remove it from one corner of the panel.
