Hoftronic Maisy/Ramsay LED Ground Spot

Product Overview & Visuals

The Hoftronic Maisy/Ramsay LED Ground Spot is designed for household and similar general applications, suitable for both indoor and outdoor use.

Visual Description: The product is a ground-mounted LED spotlight. The installation diagrams show the spot being placed in the ground with a specific requirement for drainage.

Drainage Requirement: A sufficient drainage of 30-40cm is required around and under the spot, which must consist of gravel.

Bulb Replacement Steps: The manual outlines 5 steps for bulb replacement, indicated by numbered diagrams.

Safety Instructions

1. Ensure the AC/Mains power is NOT connected and cannot be unexpectedly reconnected during installation.
2. This product must be installed by a qualified electrician in accordance with instructions provided and in compliance with recognised electrical and safety regulations relevant to the country it is being installed.
3. This product must NOT be installed by minors or people with a mental disability.
4. The product must NOT be covered with insulation material at any time, unless using a model with an insulation guard.
5. This product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock.
6. This product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc.
7. Product can only be supplied by rated voltage or voltage within the range provided.
8. It's forbidden to use the product with damaged protective cover.
9. Do NOT look directly at LED light beam.

Intended Use / Application

Product designed for the use in households and for other similar general applications.

Mounting

Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. All activities must be done with disconnected power supply. Exercise particular caution. The product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock.

Mounting Diagram Reference: Refer to the visual diagrams for mounting details. Ensure proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, select the correct diameter of the power cable for the cable gland used in the product.

Functional Characteristics

Product can be used indoors and outdoors.

Usage Guidelines / Maintenance

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It's forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. This is a nondemountable product and is not suitable for independent repairs.

Environmental Protection

Keep your environment clean. Segregation of post-packaging waste is recommended. The symbol ♻️ (crossed-out wheeled bin) indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when a new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

Comments / Guidelines

Failure to follow these instructions may result in, for example, fire, burns, electrical shock, physical injury, and other material and non-material damage. For more information about Hoftronic products, visit docs.hoftronic.com/manuals. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the right to make changes in the manual; the current version can be downloaded at docs.hoftronic.com/manuals.