HOFTRONIC LED Panels

User Manual

Important Safety Details

Ensure the AC/Mains power is NOT connected and cannot be unexpectedly reconnected during installation.
This product must be installed by a qualified electrician in accordance with instructions provided and in compliance with recognised electrical and safety regulations relevant to the country it is being installed.
This product may NOT be installed by minors or people with a mental disability.
The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire should be replaced.

Installation Methods

T-Bar Ceiling Recessed Installation

Step 1: Ensure power is off. Diagram shows a grid of ceiling tiles, with one tile being removed and another being pushed aside to create an opening.

Step 2: Diagram shows a close-up of electrical wiring being connected to the panel's driver/connector.

Step 4: Diagram shows the LED panel being inserted upwards into the prepared ceiling opening.

Step 5: Diagram shows the installed panel in the ceiling, with a symbol indicating power is on ([Power On]).

Suspension Installation

*Suspension accessories are sold separately!

Step 1: Diagram shows ceiling mounting points with screws and anchors, and suspension wires/cables. Quantities are marked as 'x4'.

Step 2: Diagram shows a bracket or hook being attached to a ceiling joist or support.

Step 3: Diagram shows the suspension wires being attached to the panel and the ceiling mounting points.

Step 4: Diagram shows the LED panel hanging from the ceiling via four suspension wires.

Step 5: Diagram shows the panel installed and wired, emitting light.

Step 6: Diagram shows the panel switched on ([Power On]).

Surface Mounting Frame Installation

*Mounting frames are sold separately!

Dimensions: Available for 62x62cm, 60x60cm, and 30x120cm panels.

Frame Dimensions:

62x62cm panel: Requires frame with approximate dimensions 595mm x 595mm (diagram shows 595mm and 300mm spacing).
60x60cm panel: Requires frame with approximate dimensions 568.5mm x 568.5mm (diagram shows 568.5mm and 300mm spacing).
30x120cm panel: Requires frame with approximate dimensions 268mm x 1195mm (diagram shows 150mm, 300mm, 268mm, 300mm, 150mm spacing).

Step 4: Diagram shows the assembly of the surface mounting frame, with close-ups of how the frame pieces connect.

Step 5: Diagram shows the assembled frame ready to be mounted.

Step 6: Diagram shows the LED panel being placed into the assembled frame, with an arrow indicating insertion.

Step 7: Diagram shows the panel secured within the frame, ready for installation.

Step 8: Diagram shows the mounted panel on a flat ceiling surface, emitting light.

Step 9: Diagram shows the panel switched on ([Power On]).

Usage Guidelines & Maintenance

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It's forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Non-demountable product. Not suitable for independent repairs.

Environmental Protection

Keep your environment clean. Segregation of post-packaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

Comments / Guidelines

Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Hoftronic products visit www.hoftronic.com. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the right to make changes in the manual - the current version can be downloaded at www.hoftronic.com.

Declarations of Conformity

Formal documentation such as the declaration of conformity, safety data sheet, and product test report is available upon request. The product complies with relevant EU directives (LVD, EMC, RoHS). The complete Declaration of Conformity Document (DOC) is available upon request.

	HOFTRONIC CALI LED HIGH BAY 200LM/W User Manual User manual for the HOFTRONIC CALI LED HIGH BAY 200LM/W, providing essential safety instructions, detailed dimensions, mounting procedures, wiring diagrams, and optional accessories for industrial and commercial lighting applications.
	HOFTRONIC LUMOS LED Floodlight User Manual User manual for the HOFTRONIC LUMOS LED Floodlight, providing essential safety details, step-by-step installation instructions, usage guidelines, and maintenance information. Features IP65 rating and a 2-year warranty.
	HOFTRONIC T8 & T5 LED Tubes User Manual and Installation Guide Comprehensive user manual and installation guide for HOFTRONIC T8 and T5 LED tubes, covering safety, specifications, applications, and installation procedures. Features include high lumen efficiency, energy saving, and long lifespan.
	Hoftronic Smart Driver User Instructions and Installation Guide Comprehensive user instructions and installation guide for the Hoftronic Smart Driver, a wireless control LED power driver with Wi-Fi and Bluetooth connectivity. Learn about mounting, usage, maintenance, and safety precautions.
	HOFTRONIC Rome Dimmable LED Downlight User Manual \| Installation & Safety Guide User manual for the HOFTRONIC Rome Dimmable LED Downlight (SKUs 4400316, 4400323, 4400330). Provides essential safety instructions, detailed installation guidance, technical specifications, usage tips, maintenance advice, environmental considerations, and declaration of conformity. Features include dimmability, IP44 rating, and a 5-year warranty.
	Hoftronic Maisy/Ramsay LED Ground Spot Installation and Safety Manual Comprehensive installation guide and safety instructions for the Hoftronic Maisy/Ramsay LED Ground Spot. Covers mounting, usage, maintenance, environmental protection, and comments. Includes technical specifications and intended use.
	HOFTRONIC 1-10V LED Dimmer User Manual (Model 5435898) User manual for the HOFTRONIC 1-10V LED Dimmer (Model 5435898), detailing safety precautions, product features, technical specifications, installation instructions, and wiring diagrams for controlling dimmable LED drivers and ballasts.
	HOFTRONIC Oberon Highbay LED Luminaire User Manual and Installation Guide Comprehensive user manual and installation guide for the HOFTRONIC Oberon Highbay LED luminaire, detailing its features, specifications, safety precautions, installation procedures, and optional accessories.