HOFTRONIC™ BLENDA PIR SENSOR LED WALL LIGHT
SKU: 5427015
Features: 3 YEAR WARRANTY, IP44 RATING
IMPORTANT SAFETY DETAILS
1. Ensure the AC/Mains power is NOT connected and cannot be unexpectedly reconnected during installation.
2. This product must be installed by a qualified electrician in accordance with instructions provided and in compliance with recognised electrical and safety regulations relevant to the country it is being installed.
3. This product may NOT be installed by minors or people with a mental disability.
4. This wall light must be installed to the current edition of the IEE wiring regulations and relevant building regulations in your country.
5. This wall light is designed for indoor and outdoor use.
Diagram 1: Shows the wall light fixture in an "OFF" state.
Diagram 2: Illustrates the necessary tools and hardware for mounting, including screws, wall plugs, and a screwdriver.
Diagram 3: Depicts the electrical wiring connections. Incoming power lines (Live, Earth ?, Neutral) are shown connecting to the corresponding terminals within the wall light fixture.
Diagram 4: Shows the wall light fixture being mounted onto a wall surface, with an arrow indicating the direction of attachment.
Diagram 5: Shows the fixture with a rotational arrow, suggesting a step for securing or adjusting it.
Diagram 6: Shows the wall light fixture in an "ON" state.
CHANGING THE TIMER
Decreasing the timer will keep the lamp burning for a shorter time, increasing the timer will keep the lamp burning for a longer time after the lamp will turn on.
DECREASING THE TIMER: A control dial with a "-" symbol and a timer icon set to a shorter duration (10±5 SEC). An arrow indicates a downward adjustment.
INCREASING THE TIMER: A control dial with a "+" symbol and a timer icon set to a longer duration (5±1 MIN). An arrow indicates an upward adjustment.
CHANGING THE SENSOR SENSITIVITY
Decrease the twilight sensor sensitivity if you want the lamp to turn on only when it is dark, by increasing the twilight sensor sensitivity the lamp will turn on earlier, for example when it starts to get dark or when it is very cloudy.
DECREASING THE TWILIGHT SENSOR SENSITIVITY: Visual shows a person further away from the light, under a bright sun ☀️ or daylight conditions, indicating the sensor requires more darkness to activate. The adjustment dial is set lower.
INCREASING THE TWILIGHT SENSOR SENSITIVITY: Visual shows a person closer to the light, under a moon ? or twilight/cloudy conditions, indicating the sensor will activate in dimmer light. The adjustment dial is set higher.
CHANGING THE DETECTION RANGE
Decrease the detection range if you want the lamp to turn on when you are closer, increase the detection range if you want the lamp to turn on already when you are further away.
DECREASING THE DETECTION RANGE: Visual shows a person standing closer (3±1 M) to the light, with a 90° detection angle ?. The adjustment dial is set lower.
INCREASING THE DETECTION RANGE: Visual shows a person standing further away (7±1 M) to the light, with a 90° detection angle ?. The adjustment dial is set higher.
HOW TO CHANGE INTO MANUAL MODE
- When power on, the PIR detector enters into the "warm up" for about 1 minute, then it will automatically change into auto mode.
- During auto mode, by switching on/off 2 times within 3 seconds and then switch on again, the PIR detector will automatically change into manual mode. In manual mode, the lamps will remain on, the PIR detector will not be affected by duration time and lux control level.
- During manual mode or auto mode, by switching off over 6 seconds an then on again, the PIR detector will reset to "warm up" maybe shorter than 1 minute.
Mode sequence diagram: "POWER ON" (1) initiates a "warm up" phase, leading to "AUTO MODE" (2). To enter "MANUAL MODE" (3) from "AUTO MODE", switch the power off and on twice within 3 seconds, then switch on again. To reset from either mode, switch off for over 6 seconds and then switch on again, initiating a shorter "warm up".
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It's forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Non-demountable product. Not suitable for independent repairs.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Hoftronic products visit www.hoftronic.com. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the right to make changes in the manual - the current version can be downloaded at www.hoftronic.com.
DECLARATION OF CONFORMITY
This product has been manufactured and supplied in compliance with all relevant regulations and directives applicable to all member states of the European Union. The product complies with all applicable regulations and rules in the country of sale. Formal documentation such as the declaration of conformity, the safety data sheet and the product test report is available upon request.
CE DECLARATION
The product complies with the following directives:
- LVD: 2014/35/EU
- EMC: 2014/30/EU
- RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) is available upon request.
DE - KONFORMITÄTSERKLÄRUNG
Dieses Produkt wurde unter Einhaltung aller relevanten Vorschriften und Richtlinien hergestellt und geliefert, die für alle Mitgliedsstaaten der Europäischen Union gelten. Das Produkt entspricht allen im Verkaufsland geltenden Vorschriften und Regeln. Formale Unterlagen wie die Konformitätserklärung, das Sicherheitsdatenblatt und der Produktprüfbericht sind auf Anfrage erhältlich.
CE-KONFORMITÄTSERKLÄRUNG
Dieses Produkt entspricht den folgenden Richtlinien:
- LVD: 2014/35/EU
- EMC: 2014/30/EU
- RoHS: 2011/65/EU
Das vollständige EC Document of Compliance ist auf Anfrage erhältlich.
NL - CONFORMITEITSVERKLARING
Dit product is in overeenstemming met alle relevante reglementen en richtlijnen die gelden voor alle lidstaten van de Europese Unie geproduceerd en geleverd. Het product voldoet aan alle toepasselijke voorschriften en regelingen in het land van verkoop. Formele documentatie als de conformiteitsverklaring, het veiligheidsinformatieblad en het product testrapport is beschikbaar op verzoek.
CE-CONFORMITEITSVERKLARING
Dit product voldoet aan de volgende richtlijnen:
- LVD: 2014/35/EU
- EMC: 2014/30/EU
- RoHS: 2011/65/EU
Het complete EG conformiteitsdocument is op aanvraag beschikbaar.
Importer Information
Imported by HOF Trading B.V. Fahrenheitstraat 11, 6003 DC Weert, The Netherlands
Made in P.R.C.
Visit www.hoftronic.com for more information.
HOFTRONIC - HOFTRONIC
