IKEA UTRUSTA Cabinet Corner Carousel Assembly Instructions

Product Overview

This document provides assembly instructions for the IKEA UTRUSTA corner carousel system designed for cabinets.

Parts Included

The following parts are included in the package:

• 4x Bolt (10131093)
• 17x Screw (10154801)
• 3x Screw (10046940)
• 4x Nut (10130114)
• 1x Handle (100001)
• 28x Clip (10130000)
• 2x Cover (10130021)

Assembly Steps

1. Attach the carousel base components. Ensure correct orientation as shown in the diagram. (Diagram shows two circular base parts being joined with an upward arrow indicating assembly).

2. Prepare the cabinet for installation. This involves ensuring the cabinet is stable and correctly positioned. (Diagram shows a person placing a base part into a cabinet, with a close-up showing screws being inserted).

   Use 4 screws (10154801) for this step. (Diagram shows a screwdriver inserting screws into pre-drilled holes).

3. Secure the carousel base to the cabinet. (Diagram shows a circular base being attached to the cabinet floor using screws).

   Use 4 screws (10154801) for this step. (Diagram shows a screwdriver inserting screws).

4. Continue securing the carousel base. (Diagram shows further attachment of the base with screws).

   Use 2 screws (10154801) for this step. (Diagram shows a screwdriver inserting screws).

5. Attach the carousel structure to the base. (Diagram shows a circular structure with shelves being placed onto the base and secured with screws).

   Use 5 screws (10154801) for this step. (Diagram shows a screwdriver inserting screws).

6. Insert the carousel into the cabinet. (Diagram shows the assembled carousel being lowered into the cabinet with arrows indicating movement and rotation).

   Ensure the carousel rotates freely. (Diagram shows a hand adjusting the carousel).

7. Install the support rails. (Diagram shows rails being attached to the inside walls of the cabinet).

   Use 14 clips (10130000) for this step. (Diagram shows clips being attached to the rails).

8. Attach the rails to the cabinet. (Diagram shows rails being screwed into the cabinet walls).

   Use 2 screws (10046940) for this step. (Diagram shows screws being inserted into the rails and cabinet).

9. Attach the remaining rails. (Diagram shows further rail installation).

   Use 2 screws (10154801) for this step. (Diagram shows screws being inserted).

10. Attach the final rails. (Diagram shows the last set of rails being attached).

    Use 1x screw (10154801) for this step. (Diagram shows a screw being inserted).

11. Attach the final rails. (Diagram shows the last set of rails being attached).

    Use 1x screw (10154801) for this step. (Diagram shows a screw being inserted).

12. Attach the final rails. (Diagram shows the last set of rails being attached).

    Use 1x screw (10154801) for this step. (Diagram shows a screw being inserted).

13. Attach the final rails. (Diagram shows the last set of rails being attached).

    Use 1x screw (10154801) for this step. (Diagram shows a screw being inserted).

14. Attach the final rails. (Diagram shows the last set of rails being attached).

    Use 1x screw (10154801) for this step. (Diagram shows a screw being inserted).

15. Insert the carousel into the cabinet. (Diagram shows the carousel being placed into the cabinet with an arrow indicating rotation).

16. Complete the carousel installation. (Diagram shows the carousel fully installed and rotating within the cabinet).

17. Attach the carousel shelves. (Diagram shows shelves being attached to the central rotating mechanism using clips).

    Use 14x clips (10130000) for this step. (Diagram shows clips securing the shelves).

18. Secure the carousel shelves. (Diagram shows the shelves being locked into place with covers).

    Use 1x cover (10130021) for this step. (Diagram shows covers being attached).

Weight Capacity

The maximum weight capacity for each shelf is 20 kg (44 lb).

Final Check

Ensure all parts are securely fastened and the carousel rotates smoothly.