IKEA UTRUSTA Carrousel Under-Corner Cabinet Assembly Instructions

Product Overview

This document provides detailed assembly instructions for the IKEA UTRUSTA carrousel under-corner cabinet. It includes a list of all necessary parts and hardware, along with step-by-step guidance for installation.

Brand: IKEA

Product Name: UTRUSTA Carrousel Under-Corner Cabinet

Article Number: AA-2537650-3

Parts and Hardware

Ensure all components are present before beginning assembly:

1x Handle (Part Number: 100001)
28x Bracket/Clip (Part Number: 10130000)
2x Cover/Cap (Part Number: 10130021)
4x Bolt (Part Number: 10131093)
17x Screw (Part Number: 10154801)
3x Screw (Part Number: 10046940)
4x Nut (Part Number: 10130114)

Tools Required

The following tools are recommended for assembly:

Phillips head screwdriver [screwdriver]
Flat head screwdriver [screwdriver]

Assembly Guide

Step 1: Prepare the Carrousel Unit

The initial step involves preparing the carrousel mechanism. Two identical carrousel units are shown, with one being lifted upwards, indicating preparation for installation or assembly.

Step 2: Cabinet Preparation and Initial Attachment

Prepare the cabinet for the carrousel. The diagram illustrates correct and incorrect methods for placing components into the cabinet. A zoomed-in view shows the attachment of a component to the cabinet base using 4x screws (Part Number: 10154801).

Step 3: Securing the Base Plate

Position the circular base plate onto the cabinet floor. Secure it using screws. This step is shown in multiple diagrams (Steps 3, 2, 3, 4 in the original numbering), consistently using screws (Part Numbers: 10154801, 2x or 4x) to fix the plate to the cabinet base.

Step 4: Attaching the Carrousel Mechanism

Attach the main carrousel rotating mechanism to the cabinet base. This involves aligning the mechanism and securing it with screws (5x, Part Number: 10154801).

Step 5: Installing Carrousel Shelves

Insert the carrousel shelves into the cabinet. The shelves are placed onto the central rotating plate. A close-up view shows a hand engaging a locking mechanism on the rotating plate.

Step 6: Cabinet Interior Markings

The cabinet interior is shown with markings indicating shelf positions, ranging from MIN (1, 2, 6) to MAX (8, 10). These markings guide the placement of the carrousel shelves.

Step 7: Attaching Vertical Support Rails

Attach the vertical support rails to the interior walls of the cabinet using screws (2x, Part Number: 10046940). These rails provide support for the carrousel shelves.

Step 8: Assembling the Carrousel Structure

Assemble the main rotating carrousel structure. This involves connecting the central rotating plate assembly to a horizontal rail using bolts (4x, Part Number: 10131093) and nuts (4x, Part Number: 10130114). The handle (1x, Part Number: 100001) is also attached during this step.

Step 9: Mounting the Carrousel Assembly into Cabinet

Mount the assembled carrousel structure into the cabinet. Screws (2x) are used to secure the assembly to the cabinet sides.

Step 10: Securing Horizontal Rails

Secure the horizontal rails that the carrousel shelves will slide on. This is done by attaching them to the cabinet side using screws (1x, Part Number: 10046940).

Step 11 & 12: Attaching Carrousel Shelves

Attach the carrousel shelves to the installed rails. This is done by sliding the shelves onto the rails and securing them with screws (1x, Part Number: 10154801) in multiple points.

Step 13 & 14: Final Shelf Securing

Complete the attachment of the carrousel shelves by securing them with screws (1x, Part Number: 10154801) in the designated points.

Step 15: Inserting the Assembled Carrousel

Carefully insert the fully assembled carrousel unit into the cabinet.

Step 16: Final Placement and Locking

Position the carrousel correctly within the cabinet. A close-up view shows a hand engaging a locking mechanism to ensure the carrousel is securely in place.

Step 17: Attaching Shelf Brackets

Attach the final set of brackets (28x, Part Number: 10130000) to the carrousel shelves. These brackets are crucial for the shelves' stability and function.

Step 18: Securing Shelves with Caps

Place the protective caps (2x, Part Number: 10130021) onto the shelf brackets to secure them and provide a finished look.

Weight Capacity

Each carrousel shelf is designed to hold a maximum weight of 20 kg (44 lb).

	IKEA UTRUSTA Rotating Corner Cabinet Assembly Instructions A comprehensive guide detailing the assembly process for the IKEA UTRUSTA rotating corner cabinet element, including a parts list and step-by-step instructions.
	IKEA UTRUSTA Corner Cabinet Carousel Assembly Instructions Step-by-step guide for assembling the IKEA UTRUSTA corner cabinet carousel, including parts list and installation instructions.
	IKEA UTRUSTA Cabinet Corner Carousel Assembly Instructions Step-by-step guide for assembling the IKEA UTRUSTA corner carousel for cabinets, including parts list and installation steps.
	IKEA UTRUSTA Corner Cabinet Carousel Assembly Instructions A step-by-step guide for assembling the IKEA UTRUSTA corner cabinet carousel, including parts list and assembly diagrams.
	IKEA UTRUSTA Corner Cabinet Rotating Shelf Assembly Instructions Detailed assembly instructions for the IKEA UTRUSTA corner cabinet rotating shelf, including parts list and step-by-step guidance.
	IKEA UTRUSTA Corner Base Cabinet Carousel Assembly Instructions Step-by-step guide for assembling the IKEA UTRUSTA corner base cabinet carousel, including parts list and assembly diagrams.
	UTRUSTA Corner Base Cabinet Carousel Assembly Instructions \| IKEA Detailed assembly instructions for the IKEA UTRUSTA corner base cabinet carousel. Includes a comprehensive parts list, step-by-step guidance, and important safety information for installation.
	METOD Corner Wall Cabinet Assembly Instructions \| IKEA Detailed step-by-step assembly instructions for the IKEA METOD corner wall cabinet. This guide includes a comprehensive parts list, required tools, and essential safety warnings to ensure proper and safe installation of your kitchen cabinet.