GameSir T4 Pro Wireless Controller User Manual

System Requirements

• Android 8.0 or above
• iOS 13 or above
• Windows 7/10/11

Device Layout

The GameSir T4 Pro features an ergonomic design with various buttons and components. The main layout includes:

• A: Left Joystick
• B: D-Pad (Directional Pad)
• C: SELECT Button
• D: HOME Button
• E: START Button
• F: Right Joystick
• G: ABXY Buttons (A, B, X, Y)
• H: TURBO Button
• I: Indicator Light

Additional components and buttons are located on the top and back:

• J: USB Receiver (for wireless connection)
• K: LB Button (Left Bumper)
• L: RB Button (Right Bumper)
• M: LT Button (Left Trigger)
• N: RT Button (Right Trigger)
• O: Type-C Connector (for charging and wired connection)
• P: Phone Holder Base (slot for attaching a phone)
• Q: Charging Indicator Light
• R: M1 M3 Buttons (programmable back buttons)
• S: M2 M4 Buttons (programmable back buttons)

Power and Pairing

Power On: Press and hold the HOME button for 1 second.

Power Off: Press and hold the HOME button for 5 seconds.

Pairing Mode: To enter pairing mode, select a specific key combination (e.g., Y + HOME for Switch, A + HOME for Android, B + HOME for iOS) and power on the gamepad.

Reconnect: The controller remembers the last paired device. Simply press and hold the HOME button to automatically reconnect.

Using the Phone Holder

To attach the phone holder, please insert it from the top of the gamepad into the designated base (P).

Charging the Gamepad

Use a charging cable to connect the Type-C interface (O) on the top of the gamepad to a USB charging port.

Battery Status

When the battery is below 15%, the Charging Indicator (Q) will flash red quickly.

Connecting via USB Receiver

This method is used for connecting to a computer or Android TV box.

1. Plug the USB receiver (J) into the USB port of your computer or Android TV box.
2. Press the X + HOME buttons until the gamepad is turned on. The gamepad's indicator should be solid blue, and the receiver's should be solid red, indicating a successful connection.
3. The next time you connect, simply press the gamepad's HOME button to power on; it will automatically connect.

Note: If the gamepad has been switched to another mode, you may need to use the appropriate key combination to restart the connection process.

Indicator Status (USB Receiver)

Connecting via USB Cable (PC)

When the gamepad is off, plug the USB cable into the USB port of your PC for a wired connection.

The indicator status for this connection is similar to the USB receiver method, showing modes like Connecting, Pairing, and Connected.

Connecting via Bluetooth (Nintendo Switch)

1. On the Nintendo Switch main interface, navigate to Controllers > Change Grip/Order to enter the pairing interface.
2. Press the Y + HOME buttons until the gamepad powers on.
3. The gamepad will automatically pair with the Switch.
4. The next time you connect, just press the gamepad's HOME button to power on; it will automatically connect and wake up the Switch.

Note: In Switch mode, the functions of the A and B buttons, and the X and Y buttons will be swapped.

Connecting via Bluetooth (Mobile Devices)

For Android Devices (Controller-Supported Games)

This applies to mobile games that support using a gamepad.

1. Press the A + HOME buttons until the gamepad powers on.
2. Turn on your phone's Bluetooth, search for "[Gamesir-T4pro]", and pair.
3. The next time you connect, press the gamepad's HOME button to power on; it will automatically connect.

For iOS Devices (Apple Arcade and MFi Games)

This applies to iOS mobile games that support using a gamepad.

1. Press the B + HOME buttons until the gamepad powers on.
2. Turn on your phone's Bluetooth, search for "[Xbox Wireless Controller]", and pair.
3. The next time you connect, press the gamepad's HOME button to power on; it will automatically connect.

Note: If the gamepad has been switched to another mode, you may need to use the key combination to restart.

Indicator Status (Mobile Bluetooth)

Backlight and Motor Vibration Intensity Adjustment

Turbo Function

The Turbo function allows for achieving fast attacks in games.

Note: In Switch mode, the TURBO button is defaulted to the Screenshot function. To use the Turbo function, it's required to change the Screenshot function to the Turbo function by pressing the R3 + TURBO buttons first. Then set the Motor Vibration Intensity / Turbo Function as above. To use the Screenshot function, press the R3 + TURBO buttons again.

Back Buttons Function

Back Buttons Layout

The gamepad features four programmable back buttons:

• M1: Assigned to B button by default.
• M2: Assigned to A button by default.
• M3: Assigned to Y button by default.
• M4: Assigned to X button by default.

Back Buttons Programming

You can set single buttons or multiple buttons to be programmable.

Precautions

⚠️ NOTICE: PLEASE READ THESE PRECAUTIONS CAREFULLY.

• CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek immediate medical attention if swallowed or inhaled.
• DO NOT use the product near fire.
• DO NOT expose to direct sunlight or high temperatures.
• DO NOT leave the product in a humid or dusty environment.
• DO NOT hit or drop the product.
• DO NOT touch USB port directly, as it might cause malfunctions.
• DO NOT strongly bend or pull cable parts.
• Use a soft, dry cloth while cleaning.
• DO NOT use chemicals such as gasoline or thinner.
• DO NOT disassemble, repair, or modify the product.
• DO NOT use for purposes other than its original purpose. GameSir is NOT responsible for accidents or damage when used for non-original purposes.
• DO NOT look directly at the optical light; it might damage your eyes.
• If you have any quality concerns or suggestions, please contact GameSir or your local distributor.

Nintendo Switch™ is a registered trademark of Nintendo. All rights reserved. All other trademarks are property of their respective owners. Photos and illustrations are not binding. Contents, designs, and specifications are subject to change without notice and may vary from one country to another. This product is not distributed under official license form or approved, sponsored, or endorsed by Nintendo. This product is not manufactured for Nintendo.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.