GameSir-T3s Wireless Game Controller

Package Contents

• GameSir-T3s Game Controller
• Receiver
• Micro-USB Data Cable (1.8m)
• User Manual
• Certificate of Conformity

System Requirements

• Windows 7 or later
• Android 7.0 or later
• iOS 13 or later
• Nintendo Switch / Switch Lite

Equipment Layout

The GameSir-T3s controller features the following components:

• A: D-pad
• B: Functional Area (Face Buttons)
• C: A/B/X/Y Buttons
• D: Indicator Light
• E: HOME Button
• F: Left Analog Stick
• G: Right Analog Stick
• H: L1 / L2 Shoulder Buttons
• I: R1 / R2 Shoulder Buttons
• J: Micro-USB Port (for charging/wired connection)
• K: USB Data Cable
• L: Bluetooth Receiver (Dongle)
• M: Receiver Pairing Button
• N: Receiver Indicator Light

Power On and Off

To Turn On:

Press and hold the key combination for the respective mode for 2 seconds:

• A + HOME: Android (Bluetooth)
• B + HOME: iOS (Bluetooth)
• X + HOME: PC (Bluetooth Adapter)
• Y + HOME: Switch / Switch Lite (Bluetooth)

Alternatively, pressing the HOME button directly will turn on the gamepad in the last used mode.

To Turn Off:

Press and hold the HOME button for 3 seconds.

The gamepad will automatically turn off after 10 minutes of inactivity.

Charge Level Indicator

Receiver Pairing

The receiver is pre-paired with the gamepad from the factory. If you encounter connection issues, follow these steps for re-pairing:

1. Connect the receiver to the USB port of your device. Press the receiver's pairing button; the receiver indicator will flash rapidly.
2. Turn on the gamepad in the appropriate mode and wait for it to pair with the receiver.

Note: If the gamepad indicator flashes slowly after powering on, it is in feedback mode. Wait 25 seconds, and it will automatically enter rapid pairing mode.

After successful connection, the receiver indicator will be solid red, and the gamepad indicator will be solid in the color corresponding to the successful connection mode.

Connecting to a PC via Receiver

1. Press and hold the X button + HOME button for 2 seconds until the gamepad turns on. The green indicator will flash slowly, indicating it has entered re-pairing mode.
2. Insert the receiver into the PC's USB port. The red indicator on the receiver will start flashing slowly, indicating it has entered re-pairing mode.
3. A solid green indicator on the gamepad and a solid red indicator on the receiver signify a successful connection.

Connecting to a PC via USB Cable

Connect one end of the data cable to the gamepad's Micro-USB port and the other end to the computer's USB port. The gamepad will turn on automatically. A solid green indicator signifies a successful connection.

Connecting to a TV or Android Box via USB Cable

Connect one end of the data cable to the gamepad's Micro-USB port and the other end to the TV or Android Box's USB port. The gamepad will turn on automatically. A solid blue indicator signifies a successful connection.

Connecting to a Mobile Phone via Bluetooth (Android)

For direct connection to Android devices and playing games that support gamepads:

1. Press and hold the A button + HOME button for 2 seconds until the gamepad turns on. The blue indicator will flash rapidly, indicating pairing mode.
2. Enable Bluetooth on your phone/TV, select "GameSir-T3s-**" (the ** will vary), and pair.
3. A solid blue indicator on the gamepad signifies a successful connection.

Connecting to Apple Devices for Apple Arcade and MFi Games

For direct connection to Apple mobile phones to play Apple Arcade and MFi games:

1. Press and hold the B button + HOME button for 2 seconds until the gamepad turns on. The violet indicator will flash rapidly, indicating pairing mode.
2. Open your mobile phone's Bluetooth list and select the device: "Xbox Wireless Controller", then tap to pair.
3. A solid violet indicator on the gamepad signifies a successful connection.

Connecting to Switch or Switch Lite via Bluetooth

1. Press and hold the Y button + HOME button for 2 seconds until the gamepad turns on. The red indicator will flash rapidly, indicating pairing mode.
2. On the Switch/Switch Lite main interface, navigate to "Controllers" -> "Change Grip/Order" to enter the pairing interface.
3. Wait for the gamepad to pair with the Switch/Switch Lite. After successful pairing, the gamepad's red indicator will be solid.
4. The next time you turn on the gamepad, simply press and hold the HOME button for 2 seconds to wake the Switch/Switch Lite from sleep mode.

Turbo/Combo Function

1. Set Combo: Press and hold the button you wish to set as a combo, then press the TURBO button. (Combo buttons can be A/B/X/Y/L1/L2/R1/R2).
2. Combo Speed: There are 3 speeds: Slow / Medium / Fast.
3. Switch Combo Speed: Press and hold the TURBO button, then press the D-pad Left (for slow speed) or Right (for fast speed) to adjust the combo speed. The indicator flashes once for slow speed, twice for medium speed, and three times for fast speed.
4. Clear Combo:
   • Press and hold the CLEAR button for 2 seconds to clear all assigned combo functions.
   • To cancel a specific combo, press and hold the button with the combo function, then press the TURBO button.

Vibration Intensity Adjustment

1. Vibration Levels: There are 4 levels: Off / Low / Medium (default) / High.
2. Adjust Vibration Level: Press and hold the TURBO button, then press the D-pad Down button (to lower) or Up button (to raise) to adjust the vibration intensity.

Joystick and Trigger Calibration

If the joystick is not centering properly or is off-axis, or if the trigger does not return to "0" or reach its maximum value, you can use the following calibration method:

1. Press L2 + R2 + L3 + R3 simultaneously for three seconds. The indicator light will begin to flash blue and violet alternately.
2. Rotate both joysticks to their maximum angle 3 times each, and press L2 and R2 to their full range.
3. Press and hold L1 + R1 for two seconds to confirm the joystick and trigger calibration.

Gamepad Reset (Hard Reset)

If the gamepad cannot be used normally, you can force it to shut down by pressing the reset button on the back of the gamepad with a thin needle.

Gamepad Firmware Update

The gamepad can check for new firmware by connecting to the "GameSir App".

Safety Precautions

PLEASE READ THESE PRECAUTIONS CAREFULLY.

• Contains small parts. Keep away from children under 3 years old. Seek immediate medical attention if parts are swallowed or inhaled.
• Do not use the product near fire.
• Do not expose the product to direct sunlight or high temperatures.
• Do not leave the product in a damp or dusty environment.
• Do not strike the product or allow it to fall due to strong impact.
• Do not touch the USB port directly, as this may cause malfunctions.
• Do not bend or pull the cable forcefully.
• Clean the product with a soft, dry cloth.
• Do not use chemical substances such as gasoline or solvents.
• Do not disassemble, repair, or modify the product.
• Do not use the product for purposes other than its original intended use. GameSir is not responsible for any accidents or damages resulting from using the product for unintended purposes.
• Do not look directly at the optical light; it may damage your eyes.
• If you have any quality issues or suggestions, please contact GameSir or your local distributor.

Nintendo Switch™ is a registered trademark of Nintendo Corporation. All other trademarks are the property of their respective owners. Photos and illustrations are not binding. This product is not licensed by Nintendo Inc.