Manuals+

GameSir T4 Pro / T4 Pro SE User Manual

System Requirements

  • Android 8.0 or above
  • iOS 13 or above
  • Windows 7/10/11

Device Layout

The gamepad features a symmetrical design with two analog joysticks. On the left side, there is a D-Pad and a Left Joystick. On the right side, there is a Right Joystick and the ABXY buttons. In the center, there are [SELECT], [START], and [HOME] buttons, along with a [TURBO] button. The top shoulder features [LB] and [RB] buttons, and the triggers are [LT] and [RT]. A Type-C connector is located on the top. The underside has programmable [M1], [M2], [M3], and [M4] buttons. An indicator light is also present.

Power, Pairing, and Reconnection

Power On

Press and hold the [HOME] button for 1 second.

Power Off

Press and hold the [HOME] button for 5 seconds.

Pairing Mode

Select a key combination to power on to enter the corresponding pairing mode, depending on the desired gamepad mode.

Reconnect

The controller remembers the last pairing. Press and hold the [HOME] button to automatically reconnect to the last paired device.

Using the Phone Holder

Insert the phone holder from the top of the gamepad.

Charging the Gamepad

Connect a charging cable from the Type-C interface on the top of the gamepad to a USB charging port.

Battery Status and Charging Indicator

When the battery is below 15%, the Charging Indicator flashes RED quickly.

Charging Indicator States:

  • Red light stays on: Charging
  • Red light goes out: Fully charged

Connecting to Computer or Android TV Box via USB Receiver

1. Plug the USB receiver into the USB port of your computer or Android TV box.

2. Press the X + [HOME] buttons until the gamepad powers on. The gamepad's indicator will be solid blue, and the receiver's indicator will be solid red, indicating a successful connection.

3. For subsequent connections, simply press the [HOME] button to power on; it will automatically connect.

Note: If the gamepad was switched to another mode, use the specific key combination to restart.

Connection Indicator Status (USB Receiver Mode)

  • Slow Blinking Blue: Connecting
  • Fast Blinking Blue: Pairing
  • Solid Blue: Connected

Connecting to PC via USB Cable

When the gamepad is off, plug the USB cable into the USB port of your PC.

Connection Indicator Status (USB Cable Mode)

  • Slow Blinking Blue: Connecting
  • Fast Blinking Blue: Pairing
  • Solid Blue: Connected

Connecting to Nintendo Switch via Bluetooth

1. On the Switch main interface, navigate to Controllers > Change Grip/Order to enter the pairing interface.

2. Press the Y + [HOME] buttons until the gamepad powers on.

3. The gamepad will automatically pair with the Switch.

4. For subsequent connections, press the [HOME] button to power on; it will automatically connect and wake up the Switch.

Note: If the gamepad was switched to another mode, use the specific key combination to restart.

Mode Specific Note: In Switch mode, the functions of the A button & B button, and X button & Y button are swapped.

Connection Indicator Status (Switch Bluetooth Mode)

  • Slow Blinking Blue: Connecting
  • Fast Blinking Blue: Pairing
  • Solid Blue: Connected

Connecting to Mobile Phone via Bluetooth

For Android Controller-Supported Games

1. Press the A + [HOME] buttons until the gamepad powers on.

2. On your phone, turn on Bluetooth, search for "Gamesir-T4pro", and pair.

3. For subsequent connections, press the [HOME] button to power on; it will automatically connect.

Note: If the gamepad was switched to another mode, use the specific key combination to restart.

Connection Indicator Status (Android Bluetooth Mode)

  • Slow Blinking Blue: Connecting
  • Fast Blinking Blue: Pairing
  • Solid Blue: Connected

For Apple Arcade and MFi Games (iOS)

1. Press the B + [HOME] buttons until the gamepad powers on.

2. On your phone, turn on Bluetooth, search for "Xbox Wireless Controller", and pair.

3. For subsequent connections, press the [HOME] button to power on; it will automatically connect.

Note: If the gamepad was switched to another mode, use the specific key combination to restart.

Connection Indicator Status (iOS Bluetooth Mode)

  • Slow Blinking Blue: Connecting
  • Fast Blinking Blue: Pairing
  • Solid Blue: Connected

Backlight and Motor Vibration Intensity Adjustment

Backlight Adjustment

Hold [LT] + [RT] + [R3] + [D-Pad] Up/Down to adjust the gamepad's backlight brightness (5 levels, default: brightest).

ABXY Backlight Control

Hold [LB] + [RB] for 5 seconds to open or close the ABXY backlight.

Vibration Intensity Adjustment

Hold [TURBO] + [D-Pad] Up/Down to adjust the intensity of motor vibration (5 levels).

Turbo Function

The Turbo function allows for rapid button presses, simulating fast attacks.

Setting/Canceling Turbo

Hold the button to which you want to assign Turbo, then press the [TURBO] button. The backlight of the right joystick flashes red upon successful assignment. After canceling Turbo, the right joystick backlight returns to blue.

Note for Switch Mode

In Switch mode, the [TURBO] button defaults to the Screenshot function. To use Turbo, first press [R3] + [TURBO] buttons to change the Screenshot function to Turbo. Then, set the vibration/turbo as described above. To revert to the Screenshot function, press [R3] + [TURBO] buttons again.

Programmable Buttons (M1-M4)

The [M1], [M2], [M3], and [M4] buttons on the back of the gamepad can be programmed.

Default Button Values:

  • [M1]: [B] button
  • [M2]: [A] button
  • [M3]: [Y] button
  • [M4]: [X] button

Programming Modes:

Single or Multiple Button Programming

This mode allows assigning single button presses or sequences to the M buttons.

Trigger Mode (Same Time Triggering):

How to Enter: Press any M button + [SELECT] button.

Example: To program [M1] to trigger [LB] and [R3] simultaneously: 1. Press [M1] + [SELECT] to enter Same Time Trigger Programming Mode. 2. Hold [LB] and [R3]. 3. Press [M1] again to confirm. 4. Press [M1] to enable [LB] and [R3] to be triggered simultaneously.

Indicator Light: The backlight of the Right joystick stays blue and red while in programming mode, and turns solid blue upon completion.

Trigger Mode (Sequential Triggering):

How to Enter: Press any M button + [START] button.

Example: To program [M1] to trigger [LB] then [R3] sequentially: 1. Press [M1] + [START] to enter Sequential Trigger programming mode. 2. Hold [LB], then hold [R3]. 3. Press [M1] again to confirm. 4. Press [M1] to enable [LB] and [R3] to be triggered in sequence.

Indicator Light: The backlight of the Right joystick stays blue and red while in programming mode, and turns solid blue upon completion.

Important Notices and Precautions

Small Parts Warning: Keep out of reach of children under 3 years old. Seek immediate medical attention if swallowed or inhaled.

Environmental Precautions: Do not use near fire. Do not expose to direct sunlight or high temperatures. Do not leave in humid or dusty environments.

Handling Precautions: Do not hit or drop the product. Do not touch the USB port directly. Do not strongly bend or pull cable parts.

Cleaning: Use a soft, dry cloth. Do not use chemicals like gasoline or thinner.

Modification/Usage: Do not disassemble, repair, or modify. Do not use for purposes other than intended. The manufacturer is not responsible for accidents or damage from non-original use.

Eye Safety: Do not look directly at the optical light, as it may damage your eyes.

Support: For quality concerns or suggestions, contact GameSir or your local distributor.

Trademark and Compliance Information

Nintendo Switch™ is a registered trademark of Nintendo. All other trademarks are the property of their respective owners. Photos and illustrations are not binding. Contents, designs, and specifications are subject to change without notice.

This product is not officially licensed, approved, sponsored, or endorsed by Nintendo. It is not manufactured for Nintendo.

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, providing reasonable protection against harmful interference in residential installations. If interference occurs, users are encouraged to try measures such as reorienting the antenna, increasing separation, connecting to a different circuit, or consulting a dealer/technician.

Models: T4 Pro Multi Platform Game Controller, T4 Pro, Multi Platform Game Controller, Platform Game Controller, Game Controller, Controller

File Info : application/pdf, 26 Pages, 11.23MB

PDF preview unavailable. Download the PDF instead.

T4 Pro T4 Pro SE User Manual ?v=1676270926 Adobe PDF library 15.00 Adobe Illustrator CC 2017 (Windows)

Related Documents

PreviewGameSir T4 Pro Wireless Controller User Manual and Guide
Comprehensive user manual for the GameSir T4 Pro wireless gamepad. Learn about system requirements, device layout, connection methods (Bluetooth, USB), charging, button functions, turbo, back buttons, and important precautions.
PreviewGameSir T4 Pro User Manual: Setup, Features, and Connectivity
Comprehensive user manual for the GameSir T4 Pro gamepad, covering system requirements, device layout, connection methods (PC, Android, iOS, Switch), back button functions, programming, and safety guidelines.
PreviewGameSir T4 pro Gaming Controller User Manual
Official user manual for the GameSir T4 pro wireless gaming controller. Learn about setup, connection methods (PC, Android, iOS, Switch), button functions, programming, and safety guidelines.
PreviewGameSir T4 Pro User's Guide
Comprehensive user guide for the GameSir T4 Pro gamepad, detailing device layout, system requirements, connection methods for PC, mobile, and consoles, button functions, charging, safety notices, and warranty information.
PreviewGameSir T4 Cyclone Vezeték Nélküli Vezérlő Használati Útmutató
Részletes használati útmutató a GameSir T4 Cyclone vezeték nélküli vezérlőhöz, beleértve a csomag tartalmát, termékleírást, csatlakozási módokat (USB, Bluetooth), gombbeállításokat, turbó funkciót, kalibrálást, biztonsági utasításokat és jótállási információkat.
PreviewGameSir T4 Cyclone Wireless Controller User Manual
Comprehensive user manual for the GameSir T4 Cyclone wireless controller, covering package contents, product description, connection methods (USB, Bluetooth), button functions, customization, calibration, safety instructions, and environmental information.
PreviewGameSir T4 Pro User Manual
Comprehensive user manual for the GameSir T4 Pro gamepad, detailing system requirements, controller layout, connection methods (USB, Bluetooth), button functions, turbo mode, programming, and safety precautions.
PreviewGameSir T4 Cyclone Pro Wireless Controller: User Manual and Guide
This comprehensive guide provides detailed instructions for the GameSir T4 Cyclone Pro wireless controller. Learn about package contents, product features, connectivity options (PC, Nintendo Switch, iOS, Android), button mapping, advanced functions like Turbo and rear button programming, calibration procedures, and essential safety precautions.