Manuals+

GameSir T4 Pro User Manual

Gaming is winning.™

System Requirements

  • Android 8.0 or above
  • iOS 13 or above
  • Windows 7/10 or above

Device Layout

The GameSir T4 pro features a comprehensive layout for optimal gaming:

  • A: Left Joystick
  • B: D-Pad
  • C: SELECT Button
  • D: HOME Button
  • E: START Button
  • F: Right Joystick
  • G: ABXY Button (A, B, X, Y buttons)
  • H: TURBO Button
  • I: Indicator Light
  • J: USB Receiver (for PC/Android TV Box connection)
  • K: LB Button
  • L: RB Button
  • M: LT Button
  • N: RT Button
  • O: Type-C Connector (for charging)
  • P: Phone Holder Base
  • Q: Charging Indicator
  • R: M1 Button (Back Button)
  • S: M2 M4 Button (Back Buttons)

Diagram Description: A visual representation of the GameSir T4 pro gamepad showing the placement of all buttons, joysticks, D-pad, and ports. The back of the controller shows the M1, M2, M3, M4 buttons.

Power Operations

  • Power On: Press and hold the [HOME] button for 2 seconds.
  • Power Off: Press and hold the [HOME] button for 5 seconds.
  • Pairing Mode: Select a button-combination based on the desired mode (e.g., for PC, Android, Switch) and power on the gamepad to enter pairing mode.
  • Reconnect: The gamepad remembers the last paired device. Simply press and hold the [HOME] button to power on and automatically reconnect.

How to Use the Phone Holder

Please insert the phone holder from the top of the gamepad.

Diagram Description: Shows the phone holder being attached to the top of the gamepad.

How to Charge the Gamepad

Use a charging cable to connect the Type-C interface on the top of the gamepad to a USB charging port.

Battery Status

When the battery is below 15%, the Charging Indicator [Q] will flash red quickly.

Charging IndicatorDescription
Red light stays onCharging
Red light goes offFully charged

Diagram Description: Shows the gamepad connected via a USB cable to a charging port, with the Type-C connector highlighted.

Connecting to a Computer or Android TV Box via USB Receiver

  1. Plug the USB receiver [J] into the USB port of your computer or Android TV box.
  2. Press the [X] + [HOME] buttons until the gamepad is turned on.
  3. The next time you connect, simply press the [HOME] button to power on, and the gamepad will automatically connect.

NOTE: If the gamepad has been switched to another mode, you may need to use the key combination to restart.

HOME Button Indicator Status

HOME button indicatorDescription
Slow Blinking Blue ?Mode indicator / Connecting
Fast Blinking Blue ??Pairing
Solid Blue ?Connected

Diagram Description: Shows the USB receiver being plugged into a computer/TV, followed by the gamepad being turned on with the X+HOME button combination.

Connecting to PC via USB Cable

Plug the USB cable into the USB port of your computer.

HOME Button Indicator Status

HOME button indicatorDescription
(Indicator lights shown)Mode indicator

Diagram Description: Shows a USB cable connecting a computer to the gamepad.

Connecting to Switch or Switch Lite via Bluetooth

  1. Go to the main interface of the Switch, and click: Controllers → Change Grip/Order to enter the pairing interface.
  2. Press the [Y] + [HOME] buttons until the gamepad is turned on.
  3. The gamepad will automatically pair with the Switch or Switch Lite.
  4. The next time you connect to the Switch or Switch Lite, simply press the [HOME] button to power on, and the gamepad will automatically connect.

NOTE: If the gamepad has been switched to another mode, you need to use the key combination to restart.

HOME Button Indicator Status

HOME button indicatorDescription
Slow Blinking Blue ?Mode indicator / Connecting
Fast Blinking Blue ??Pairing
Solid Blue ?Connected

Diagram Description: Shows the gamepad with Y+HOME buttons pressed, followed by a Bluetooth symbol, and then the Nintendo Switch console.

Switch or Switch Lite Mode Notes

In Switch or Switch Lite mode, the key values of the A and B buttons, and the X and Y buttons of the gamepad will be swapped.

Connecting to Mobile Phone via Bluetooth (Android)

PLAY ANDROID CONTROLLER-SUPPORTED GAMES

Refers to mobile games that support using a gamepad.

  1. Press the [A] + [HOME] buttons until the gamepad is turned on.
  2. Turn on your phone's Bluetooth, search for "GameSir-T4 pro" gamepad, and click to pair.
  3. The next time you connect, simply press the [HOME] button to power on, and the gamepad will automatically connect.

NOTE: If the gamepad has been switched to another mode, you need to use the key combination to restart.

HOME Button Indicator Status

HOME button indicatorDescription
Slow Blinking Blue ?Mode indicator / Connecting
Fast Blinking Blue ??Pairing
Solid Blue ?Connected

Diagram Description: Shows the gamepad with A+HOME buttons pressed, followed by a Bluetooth symbol, and then a smartphone.

Connecting to Mobile Phone via Bluetooth (Apple Arcade & MFI Games)

Refers to mobile games that support using a gamepad.

  1. Press the [B] + [HOME] buttons until the gamepad is turned on.
  2. Turn on your phone's Bluetooth, search for "Xbox Wireless Controller" gamepad, and click to pair.
  3. The next time you connect, simply press the [HOME] button to power on, and the gamepad will automatically connect.

NOTE: If the gamepad has been switched to another mode, you need to use the key combination to restart.

HOME Button Indicator Status

HOME button indicatorDescription
Slow Blinking Blue ?Mode indicator / Connecting
Fast Blinking Blue ??Pairing
Solid Blue ?Connected

Diagram Description: Shows the gamepad with B+HOME buttons pressed, followed by a Bluetooth symbol, and then a smartphone.

For more information on Android controller-supported games, Apple Arcade games, MFi games, and how to use the GameSir T4 pro, please scan the QR code or refer to the online advanced user guide.

QR Code Description: A QR code linking to doc.xiaoji.com for further information.

Back Buttons Function

Back Buttons Layout

The gamepad features four programmable back buttons: M1, M2, M3, and M4.

Diagram Description: A diagram showing the back of the gamepad with M1, M2, M3, M4 buttons labeled. Default button values are shown.

Other Functions

KeybindsDescription
[TURBO] + D-Pad Up/DownAdjust the intensity of motor vibration (5 levels).
Hold [LT], [RT], [R3] + D-Pad Up/DownAdjust the brightness of the backlight (5 levels, default: 1 level, the brightest).
Hold [LB] + [RB] for 5 SecondsOpen/Close backlight.

Turbo Combo Function

Combo FunctionSet/Delete ComboLight IndicationProgrammable Buttons
Achieve fast attacks in the gamePress and hold the button that needs a combo set, then press the [TURBO] button.The backlight of the right joystick [F] flashes red, meaning the set is done. After deleting the combo, the backlight of the right joystick [F] becomes blue again.A, B, X, Y, LB, RB, LT, RT

Back Buttons Programming

Single button or multiple buttons can be set.

Trigger ModeHow to StartDescriptionIndicator Tips
Triggered at the same time
(e.g., M1 + SELECT)		1. Press [M button] + [SELECT] to enter the Same Time Trigger programming mode.
2. Press and hold the button you want to program.
3. Press and hold [LB] and [R3].
4. Press [M1] again to confirm.
5. Press [M1] to enable the [LB] and [R3] to be triggered simultaneously.		Example: M1 + SELECT enters the Same Time Trigger programming mode. Press and hold the desired button, then press and hold [LB] and [R3]. Press [M1] to confirm. Pressing [M1] again enables simultaneous triggering of [LB] and [R3].The backlight of the right joystick [F] stays blue and red, meaning the programming mode is entered. The backlight of the right joystick [F] stays blue, meaning the programming is completed.
Triggered in sequence
(e.g., M1 + START)		1. Press [M button] + [START] to enter the Sequential Trigger programming mode.
2. Press and hold the button you want to program.
3. Press and hold [LB] first, and then press and hold [R3].
4. Press [M1] again to confirm.
5. Press [M1] to enable [LB] and [R3] to be triggered in sequence.		Example: M1 + START enters the Sequential Trigger programming mode. Press and hold the desired button, then press and hold [LB] first, followed by [R3]. Press [M1] to confirm. Pressing [M1] again enables sequential triggering of [LB] and [R3].The backlight of the right joystick [F] stays blue and red, meaning the programming mode is entered. The backlight of the right joystick [F] stays blue, meaning the programming is completed.

Safety Precautions

PLEASE READ THIS NOTICE CAREFULLY.

  • CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek immediate medical attention if swallowed or inhaled.
  • DO NOT use the product near fire.
  • DO NOT expose to direct sunlight or high temperatures.
  • DO NOT leave the product in a humid or dusty environment.
  • DO NOT impact the product or cause it to fall due to strong impact.
  • DO NOT touch USB port directly or it might cause malfunctions.
  • DO NOT strongly bend or pull cable parts.
  • Use a soft, dry cloth while cleaning.
  • DO NOT use chemicals such as gasoline or thinner.
  • DO NOT disassemble, repair, or modify.
  • DO NOT use for purposes other than its original purpose. GameSir is NOT responsible for accidents or damage when used for non-original purposes.
  • DO NOT look directly at the optical light. It might damage your eyes.
  • If you have any quality concerns or suggestions, please contact GameSir or your local distributor.

Nintendo Switch™ is a registered trademark of Nintendo Inc. All rights reserved. All other trademarks are property of their respective owners. Photos and illustrations are not binding. Contents, designs, and specifications are subject to change without notice and may vary from one country to another. This product is not distributed under official license form or approved, sponsored, or endorsed by Nintendo Inc. This product is not manufactured for Nintendo Inc.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • - Reorient or relocate the receiving antenna.
  • - Increase the separation between the equipment and receiver.
  • - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • - Consult the dealer or an experienced radio/TV technician for help.
Models: T4 Pro, Multi-Platform Wireless Game Controller for Windows, Multi-Platform Wireless Game Controller, Wireless Game Controller, T4 Pro, Game Controller, Controller

File Info : application/pdf, 30 Pages, 10.13MB

PDF preview unavailable. Download the PDF instead.

T4 pro-User Manual ?v=1636717820\"\u003eGameSir

References

Adobe PDF library 15.00 Adobe Illustrator CC 23.0 (Windows)

Related Documents

Preview GameSir T4 Cyclone Controller: Comprehensive User Guide
Detailed user manual for the GameSir T4 Cyclone controller, covering its features, layout, connectivity, and usage across various platforms including PC, Nintendo Switch, iOS, and Android.
Preview GameSir Cyclone 2 Controller: Precision Gaming Experience
Discover the GameSir Cyclone 2, a high-performance multi-platform controller featuring Mag-Res™ TMR Sticks and Hall Effect analog triggers. Explore its tri-mode connectivity, customizable RGB lighting, and advanced features for an unparalleled gaming experience across Switch, PC, Android, and iOS.
Preview GameSir-G4 pro User Manual
This user manual provides comprehensive instructions for the GameSir-G4 pro controller, covering system requirements, device layout, charging, connection methods for various platforms (PC, Nintendo Switch, iOS, Android), button functions, turbo mode, auto-sleep, and important safety precautions. It also includes information on swapping ABXY button positions and firmware upgrades via the GameSir app.
Preview GameSir T4k Multi-Platform Wired Gaming Controller User Manual
A comprehensive guide to the GameSir T4k wired gaming controller, detailing its features, connectivity options for Nintendo Switch, PC, and Android TV, button customization, turbo function, calibration, and software integration.
Preview GameSir T3S Wireless Game Controller User Manual
Comprehensive user manual for the GameSir T3s Wireless Game Controller, covering setup, connectivity, functions, and troubleshooting for various platforms including PC, Android, iOS, and Nintendo Switch.
Preview GameSir Nova 2 Lite Controller User Manual
Comprehensive guide for the GameSir Nova 2 Lite controller, covering setup, features, and troubleshooting for multiple gaming platforms.
Preview GameSir G8 Galileo+ Controller Manual and Setup Guide
Comprehensive guide to the GameSir G8 Galileo+ controller, covering package contents, compatibility, Bluetooth and wired connections for Android and Switch, button mapping, customization via the GameSir app, joystick and trigger calibration, gyroscope adjustment, and important safety precautions.
Preview GameSir T4 Pro Wireless Controller User Manual
Comprehensive user manual for the GameSir T4 Pro wireless controller, covering system requirements, device layout, connection methods (PC, Switch, Mobile), charging, button functions, and important precautions.