Introduction
Dear Customer,
Thank you for purchasing our product. Please read the following instructions carefully before using the device for the first time and keep the user manual for future reference. Please pay special attention to the safety regulations. If you have any questions or comments regarding the device, please contact customer service. Customer service is available 24 hours a day: +44 (0)203 514 4411, www.alza.co.uk.
System Requirements
- Android 8.0
- iOS 13 or later
- Windows 7/10 or later
- Mac OS
Device Layout
The controller features two analog joysticks (A, F), a D-pad (B), face buttons (G - ABXY, E - Start, D - Home, C - Select), and a Turbo button (H). An indicator light (I) and a USB receiver (J) are also shown.
Component List:
- A. Left joystick
- B. D-Pad
- C. Select button
- D. Home button
- E. Start button
- F. Right joystick
- G. ABXY buttons
- H. Turbo button
- I. Indicator light
- J. USB receiver
The top and rear of the controller include:
- K. LB button
- L. RB button
- M. LT button
- N. RT button
- O. Type-C connector
- P. Phone holder
- Q. Charging indicator
- R. M1/M3 button
- S. M2/M4 button
Basic Operations
Powering On: Press and hold the HOME button for 2 seconds to power on.
Powering Off: Press and hold the HOME button for 5 seconds to power off.
Pairing Mode: Select a button combination according to the desired mode to activate pairing mode.
Reconnecting: The joystick remembers the last pairing. The next time you power it on, the button combination will not be needed. Simply press and hold the HOME button, and it will automatically reconnect to the last paired device.
Using the Phone Holder
Please insert the phone holder from the top side of the joystick.
[Diagram Description: Shows the phone holder being attached to the top of the controller, with an upward arrow indicating insertion.]
Charging the Joystick
Use a charging cable to connect to the Type-C interface on the top of the joystick and a USB charging port.
Battery Status
When the battery is below 15%, the current charge indicator light will flash red rapidly.
| Indicator Light | Description |
|---|---|
| Red light flashing rapidly | Below 15% battery |
| Red light on | Charging |
| Red light off | Fully charged |
[Diagram Description: Shows the controller with the Type-C port highlighted (Q), and a USB cable connected.]
Connecting to Devices
Via USB Receiver (PC/Android TV Box)
- Plug the USB receiver into the USB port of your computer or Android TV box.
- Press the X + HOME button until the joystick powers on.
- For subsequent connections, simply press the HOME button to power on; the joystick will automatically connect.
NOTE: If the joystick was switched to another mode, the button combination is required for restarting.
HOME Button Indicator Status:
| HOME Button Indicator | Description |
|---|---|
| Blue slow flashing | Connecting |
| Blue rapid flashing | Pairing |
| Solid blue light | Connected |
[Diagram Description: Shows a USB receiver being plugged into a computer/Android TV box, followed by a connection to the controller.]
Via USB Cable (PC)
Plug the USB cable into the USB port of your computer.
[Diagram Description: Shows a USB cable connecting the controller to a computer.]
Connecting to Switch or Switch Lite via Bluetooth
- Navigate to the Switch's 'Joy Con' interface and change the order to enter the pairing interface.
- Press and hold the Y + HOME button until the joystick powers on.
- The joystick will automatically connect to the Switch or Switch Lite.
- For future connections, power on the device by long-pressing the HOME button; it will automatically connect.
NOTE: If the joystick was switched to another mode, the button combination is required for restarting.
HOME Button Indicator Status: (Same as above)
In Switch or Switch Lite mode, the functions of the A and B buttons are swapped with the X and Y buttons on the joystick.
[Diagram Description: Shows a controller connecting to a Switch console via Bluetooth.]
Connecting to a Mobile Phone via Bluetooth
For Android Devices (Supports Android Joystick Games)
This applies to mobile games that support joystick use.
- Press and hold the A + HOME button until the joystick powers on.
- Enable Bluetooth on your mobile phone, search for the GameSir-T4 joystick, and pair with the phone.
- For subsequent connections, power on the device by long-pressing the HOME button; it will automatically connect.
NOTE: If the joystick was switched to another mode, the button combination is required for restarting.
HOME Button Indicator Status: (Same as above)
[Diagram Description: Shows a controller connecting to a mobile phone via Bluetooth.]
For Apple Arcade and MFI Games
This applies to mobile games that support joystick use.
- Press and hold the B + HOME button until the joystick powers on.
- Enable Bluetooth on your mobile phone, search for 'Xbox Wireless Controller', and pair with the phone.
- For subsequent connections, power on the device by long-pressing the HOME button; it will automatically connect.
NOTE: If the joystick was switched to another mode, the button combination is required for restarting.
HOME Button Indicator Status: (Same as above)
[Diagram Description: Shows a controller connecting to a mobile phone via Bluetooth.]
Connecting to an Apple Mac Device via Bluetooth
- Press and hold the SELECT + HOME button until the joystick powers on.
- Enable Bluetooth on your Apple Mac, search for 'GamepadX' joystick, and pair with the phone.
- For subsequent connections, power on the device by long-pressing the HOME button; it will automatically connect.
NOTE: If the joystick was switched to another mode, the button combination is required for restarting. Additionally, rear button programming is not supported in this mode.
HOME Button Indicator Status: (Same as above)
[Diagram Description: Shows a controller connecting to a Mac computer via Bluetooth.]
To learn more about supported Android joystick games, Apple Arcade games, MFi games, and how to use the GameSir T4 pro joystick, please scan the QR code or find the advanced user guide online.
Rear Buttons Functions
Rear Button Layout
The rear buttons are labeled M1, M2, M3, and M4.
- M1: B button
- M2: A button
- M3: Y button
- M4: X button
Other Functions
| Buttons | Description |
|---|---|
| Turbo + D-Pad Up & Down | Adjust motor vibration intensity to 5 levels, where level 1 is the highest, and the default setting is level 1. |
| Hold L2, R2, R3 + D-Pad Up & Down | Adjust backlight brightness to 5 levels, where level 1 is the highest, and the default setting is level 1. |
| Hold LB + RB for 5 seconds | Turn backlight on/off. |
Turbo Combo Function
For rapid attacks in games.
| Combo Function | Set/Delete Combination | Indicator | Programmable Buttons |
|---|---|---|---|
| Rapid attacks in games | Press and hold the button to which you want to assign the combination, then press the Turbo button. | The right joystick backlight flashes red, indicating the setting is being made. After deleting the combination, the right joystick backlight turns blue. | A, B, X, Y, LB, RB, LT, RT |
Rear Button Programming
Setting One or More Buttons
Turbo Mode
| Initiation | Description | Indicator Tips |
|---|---|---|
| Simultaneous Initiation: Any M button + SELECT |
1. M1 + SELECT selects the Trigger mode. 2. Press and hold the button to which you want to assign the combination. 3. Then press and hold the LB and R3 buttons. 4. Press the M1 button again to confirm. 5. Press the M1 button to enable simultaneous activation of LB and R3. |
The right joystick's red and blue backlight illuminates simultaneously, indicating programming mode. The right joystick backlight ring glows blue, indicating successful programming. |
| Sequential Initiation: Any M button + START |
1. M1 + START selects the sequential Trigger mode. 2. Press and hold the button to which you want to assign the combination. 3. Then press and hold the LB button first, then press and hold the R3 buttons. 4. Press the M1 button again to confirm. 5. Press the M1 button to enable simultaneous activation of LB and R3. |
The right joystick's red and blue backlight illuminates simultaneously, indicating programming mode. The right joystick backlight ring glows blue, indicating successful programming. |
Note: Switch mode does not support programming combination buttons, only single-function button setup (Apple Mac Mode does not support rear button programming).
Important Notes
- Contains small parts. Keep away from children under 3 years old. Seek immediate medical attention if a child swallows or inhales small parts.
- Do not use the product near fire.
- Do not expose the device to direct sunlight or high temperatures.
- Do not leave the device in a wet or dusty environment.
- Do not expose the device to impacts or strong forces that could cause it to fall.
- Do not touch the USB port directly, as this may cause damage.
- Do not bend or pull the cable forcefully.
- Use a soft, dry cloth for cleaning.
- Do not use chemicals such as gasoline or solvents.
- Do not disassemble, repair, or modify the device.
- Use only for its intended purpose. We are not responsible for injuries or accidents resulting from improper use.
- Do not look directly into the optical light, as it may cause eye injury. If you have any quality-related concerns or advice, please contact GameSir or your local retailer.
Warranty Terms
A two-year warranty applies to new products purchased from Alza.cz's sales network. For repairs or other services during the warranty period, contact the retailer directly. Provide proof of purchase with the original sales document indicating the date of purchase.
The following factors void the warranty terms, and the warranty cannot be claimed in such cases:
- Improper use of the product or use not in accordance with the maintenance, usage, and service instructions described in the user manual.
- Natural disasters, maintenance performed by unauthorized persons, or mechanical damage caused by the buyer's fault (e.g., during transport, improper cleaning, etc.).
- Natural wear and tear of consumables and batteries (e.g., battery, etc.).
- External environmental factors, such as sunlight and other radiation, electromagnetic fields, liquid ingress, object ingress, overvoltage, electrostatic discharge voltage (including lightning), faulty power supply or input voltage and incorrect polarity voltage, chemical processes, such as the used power supply voltage, etc.
- Any modifications, alterations, or changes in appearance and modifications made to change or expand the device's features, or in case of using non-original parts.
Compliance
This product has been tested in accordance with the standards used to certify compliance with the essential requirements defined in the relevant directives. The conformity declaration can be found on the alza.hu website.
[CE Logo]
WEEE Directive
According to the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU), the device must not be disposed of with normal household waste. Instead, return it to the place of purchase or hand it over to a designated collection point for recycling. By correctly disposing of electronic waste, you can help prevent negative impacts on the environment and human health that could be caused by improper disposal of the device. Please contact local authorities or the nearest collection point for more information. Improper disposal of the device may also result in fines in accordance with applicable national laws.
[WEEE Symbol ♻️]
