SFA Sanicompact 43 Installation Guide

Product Overview

The Sanicompact 43 is a macerator toilet designed for efficient waste disposal. This guide provides comprehensive installation instructions.

Key Features:

• Compact design
• Efficient maceration system
• Multiple connection options

Installation Guidelines

Important Considerations:

• Maximum discharge pipe length: 3 meters
• Recommended pipe diameters: Ø32 mm / Ø40 mm
• Ensure proper ventilation and access for maintenance.

Installation Steps:

1. Preparation: Before connecting, flush the toilet to clear any debris.
2. Water Connection: Connect the water supply to the designated inlet.
3. Discharge Pipe Routing: Route the discharge pipe according to the diagrams, ensuring correct angles and connections.
4. Securing the Unit: Use the provided mounting hardware (screws and plugs) to securely fix the toilet to the floor.
5. Final Connections: Complete all plumbing and electrical connections as per the diagrams.
6. Testing: Test the unit after installation to ensure proper function.

Diagrammatic Instructions:

The installation process is illustrated with numbered diagrams showing the correct assembly and connection of components. Pay close attention to pipe angles and fitting types.

Diagram 1: Shows the initial setup and connection of the macerator unit to the toilet bowl.

Diagram 2: Illustrates the connection of the discharge pipe and optional sink connection.

Diagram 3: Details the routing of the discharge pipe, including the use of elbow connectors.

Diagram 4: Shows the mounting process using screws and wall plugs.

Diagram 5: Depicts the final connections and securing of the unit.

Diagram 6: Warning against flushing inappropriate items like wet wipes or sanitary products.

Parts Included

The Sanicompact 43 comes with various components for installation:

• A: Elbow connector (x1)
• B: Clamps (32x55) (x3)
• C: Clamps (25x40) (x2)
• D: Discharge pipe (x1)
• E: Mounting brackets (x2)
• F: Screws (x2)
• G: Wall plugs (x2)
• H: Fastening nuts (x2)
• I: Screws (x2)
• J: UK flag sticker (x1)

Model Variations and Dimensions

The Sanicompact range includes several models with different dimensions:

• Sanicompact C4 SILENCE ECO+: Code: C4. Dimensions: 540mm (length) x 425mm (width) x 470mm (height).
• Sanicompact ELITE SILENCE ECO+: Code: C6. Dimensions: 558mm (length) x 498mm (width) x 480mm (height).
• Sanicompact 43 SILENCE ECO+: Code: C43. Dimensions: 440mm (length) x 400mm (width) x 464mm (height).
• Sanicompact PRO SILENCE ECO+: Code: C11. Dimensions: 577mm (length) x 467mm (width) x 470mm (height).

Technical Specifications

Sanicompact PRO:

• Voltage: 220-240 V
• Frequency: 50-60 Hz
• Current: 2.5 A
• Power: 550 W
• IP Rating: IP44

Performance Curve:

A graph shows the relationship between head (H in meters) and flow rate (Q in L/min). The curve indicates a maximum head of approximately 4 meters at a flow rate of around 80 L/min, decreasing to about 1 meter at 110 L/min.

Discharge Height and Distance:

• Maximum vertical discharge: 3 meters
• Maximum horizontal discharge: 30 meters
• Maximum discharge with bends: 10 meters (vertical), 20 meters (horizontal)

Service Helplines and Information

Contact information for SFA service helplines is provided for various countries, including France, United Kingdom, Ireland, Australia, Germany, Italy, Spain, Switzerland, Benelux, Sweden, Norway, Poland, Russia, Czech Republic, Turkey, Brazil, China, and South Africa.

For service information, visit: www.sfa.biz