VISSANI AC120-19AR Air Cooler
Use and Care Guide
Safety Information
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- Do not leave the fan running unattended.
- Keep electrical appliances out of reach from children or infirm persons. Do not let them use the appliances without supervision.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Young children should be supervised to ensure that they do not play with the appliance.
- Unplug fan before cleaning.
- The rotor guard shall not be disassembled/opened to clean the rotor blades.
- Wipe the fan enclosure and rotor blade guard with a slightly damp cloth.
Rules for Safe Operation
- Never insert fingers, pencils, or any other object through the grill when fan is running.
- Disconnect fan when moving from one location to another.
- Be sure fan is on a stable surface when operating to avoid overturning.
- DO NOT use fan in window; rain may create electrical hazard.
- Household use only.
Pre-installation
NOTE: The pictures contained in the manual are for reference only.
Package Contents
| Part | Description | Quantity |
|---|---|---|
| A | Control panel | 1 |
| B | Cord wrap | 1 |
| C | Wetted pad | 1 |
| D | Ice crystal box | 2 |
| E | Water tank | 1 |
Diagram showing the parts of the air cooler: A - Control panel, B - Cord wrap, C - Wetted pad, D - Ice crystal box (two shown), E - Water tank.
Operation
There are two water adding ways:
- The half of the water in the water tank should be pumped out, the water pump module should not be disassembled, and the water should be directly added.
- The water pump module should be separated, the water in the water tank should be pumped out completely, and then the water should be added or the water tank should be cleaned.
1. Opening the water tank
Flip the water tank latch up from vertical to horizontal position.
Diagram illustrating flipping the water tank latch upwards.
2. Pull out water tank
Pull the water tank (E) out halfway from the bottom of the machine.
Diagram showing the water tank (E) being pulled out halfway.
3. Removing the water tank
The water tank should be separated from pump module (including water tube) by turning the knob with a hand (90 degrees counterclockwise).
Diagram illustrating the separation of the water tank by turning a knob.
4. Adding water or cleaning the water tank
After the water tank is slowly pulled out, you can add the water or clean the water tank.
Diagram showing the water tank being tilted for adding water or cleaning.
5. Closing the water tank
Replace the water tank latch from horizontal back to vertical position.
Diagram illustrating flipping the water tank latch downwards to close.
6. Using the Ice Crystal Box
- The ice crystal box (D) can be repeatedly frozen and reused.
- To prevent damage, the ice crystal box (D) cover must not be opened.
- The ice crystal box material is environmentally friendly, non-toxic and harmless. It can be safely placed in the refrigerator for freezing.
- The frozen ice crystal box should be used in the water tank. After the unit is turned on, the temperature at the air outlet will be lowered.
- The ice crystal box can be replaced by ice, which also has a cooling effect.
- When adding water, the water level of the water tank should not exceed the "MAX" (maximum) level. If the water level is lower than the "MIN" (minimum) level, please add water.
Diagram of the ice crystal box (D).
7. Opening the water tank (for ice crystal box)
To use the ice crystal box, pull the water tank (E) out halfway from the bottom of the machine.
Diagram showing the water tank (E) being pulled out halfway to access the ice crystal box compartment.
8. Preparing the ice crystal box
Remove the ice crystal box from the package and put it in the refrigerator for more than 3 hours.
Place the frozen ice crystal box (D) in the water tank (E) and add water not exceeding the "MAX" (maximum) amount indicated on the scale.
Diagram showing the water tank scale and placing the frozen ice crystal box (D) into the water tank (E).
Machine Body Operation
Control Panel and Display Panel
Control Panel: Features buttons for Power, Oscillation, Humidification, Fan Speed/Timer adjustment.
Display Panel: Shows fan mode (Normal/Natural) and speed.
Button Functions:
| Button | Function Description |
|---|---|
Power [power symbol] |
Power on or off. |
Swing [swing symbol] |
Touch the swing button to start or stop oscillation. |
Humidification [droplet symbol] |
Press to start or stop humidification. In dry or hot weather, start the humidification function to have a better experience. |
Fan Modes [fan symbol] |
Two fan modes available: Normal (level 3, normal fan indicator light is lit up), or Natural (level 2, natural fan indicator light is lit up). |
+/- [plus/minus symbols] |
Press "+" or "-" to set the fan speed or timing time. Note: When timing/reservation, press this key, the time will be reduced/increased by 0.5 hours every time for 0-3 hours, and 1 hour for 3-10 hours. When adjusting the fan speed, short press this key to increase or decrease fan speed by 1 level every time. |
Timer [clock symbol] |
To set the timer, turn the power on, press the timer button, and then the display flashes 3 times, indicating the timing is completed. In the standby state, press this key, the display will flash. Set the time, and then the display flashes 6 times, indicating the setting is completed. After pressing this key, the swing function and fan speeds can be set at the same time. Cancel timed operation: Cancel timing when the unit is off: when timing has been set, press the timing button (the pattern on the screen will flicker at this time), and then long press the timing button for 2 to 6 seconds to cancel timing. Cancel timing when the unit is on: when timing has been set, press the timing button (the pattern on the screen will flicker at this time), and press the timing button 2 seconds again immediately to cancel timing. |
Remote Control Operation
Note: The remote controller can be used normally within 16.4 ft (5 m) and 30 degrees of the deviation angle in front of the product.
The battery contains many heavy metals, acid-base and other materials, being a threat to human health. The used and old batteries should be recovered.
Use manganese or alkaline batteries of type AAA. Do not use rechargeable batteries.
- Do not mix old and new batteries.
- Do not mix battery types: i. alkaline, ii. standard (carbon-zinc), or iii. rechargeable (ni-cad, nimh, etc.)
Remote Control Functions:
- Turn on/off oscillation: [oscillation button symbol]
- Turn on/adjust/turn off humidification: [humidification button symbol]
- Set fan type/Smart Timer/Delay start: [fan type/timer button symbol]
Diagram of the remote control showing buttons for oscillation, humidification, fan type, and timer, along with a AAA battery compartment.
Care and Cleaning
- Be sure to unplug the appliance from the electrical supply source before cleaning.
- Plastic parts should be cleaned with mild soap and a damp cloth or sponge. Thoroughly remove soap film with clean water.
- Be sure not to let water or other liquid enter inside of appliance.
Questions, problems, missing parts? Before returning to the store, call Vissani Customer Service.
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-VISSANI (1-855-847-7264)
Retain this manual for future use.
