Vissani VK-6082 Air Purifier: Pre-Operation and Operation Guide
Pre-Operation
Specifications
| Power Supply | AC 120V, 60Hz |
| Rated Power | 23W |
| Operating Conditions |
Temperature: 14°F–104°F / -10°C–40°C Humidity: < 85% RH |
Package Contents
| Part | Description | Quantity |
|---|---|---|
| A | Control Panel | 1 |
| B | Outlet Cover | 1 |
| C | Upper Body | 1 |
| D | Decorative Ring | 1 |
| E | Lower Body | 1 |
| F | Power Cord | 1 |
| G | Combination Filter | 1 |
| H | Base Cover | 1 |
HOMEDEPOT.COM. For further assistance, please contact 1-855-847-7264.
Pre-Operation (continued)
Do not start the air purifier until you remove the plastic packaging from the filter.
-
Removing The Base Cover
Twist the base cover (H) counterclockwise and remove it.
-
Removing The Plastic Packaging
Take out the new combination filter (G) and remove the plastic packaging.
-
Inserting The Filter
Place the unpacked combination filter (G) correctly back into the air purifier.
-
Closing The Base Cover
Close the base cover (H) and turn clockwise, making sure it is closed tightly.
Operation
Key Controls: ON/OFF, Sleep, Filter Reset, AQ Light, Speed Dial.
-
Turning On The Machine
Plug the unit into a wall socket. Press the [Power Button] to turn the air purifier on/off.
-
Adjusting Fan Speed
Turn the [Speed Dial] to the desired fan speed: I = low speed, II = medium speed, III = high speed.
-
Using Auto Mode
In Auto mode, the fan speed will be automatically adjusted according to the AQI level.
-
Reading the AQ Light
Press the [AQ Light Button]. The AQ light turns on, and the [AQ Light Indicator] will display the color according to the air quality.
AQ Color AQ Level Speed Mode Blue Very Good Sleep (Low) Green Good I (Low) Orange Unhealthy II (Medium) Red Hazardous III (High) -
Using Sleep Mode
Press the [Sleep Button] to turn Sleep mode on. The Sleep, Power, and Timer indicators will be at half brightness while Sleep mode is on. Tap the Speed, Auto, AQ, and Sleep buttons to exit from Sleep mode.
-
Setting Timer
Press the [Timer Button] to turn on the timer and cycle through timer options: 2 hours, 4 hours, 8 hours, and off.
Sleep mode will not work in Standby mode.
Pressing the [Power Button] or unplugging the air purifier will cancel the timer.
Operation (continued)
-
Filter Reset Light
When the [Filter Reset Indicator] lights up, it means you should check the filter if it needs to be cleaned or replaced.
-
Memory Function
When the air purifier is turned off and plugged in, it will remember the previous fan speed.
The filter's lifetime is based on your house air quality and usage time. Using the appliance in a humid environment will reduce the lifetime of the filter.
Care and Cleaning
FILTER REPLACEMENT
Filter Replacement Force Mode:
If needed due to local conditions or personal preference, you can replace the filter even if the filter icon does not come on. Follow the procedure below.
To Force Reset The Filter's Lifetime:
At the standby mode, press and hold the [Power Button] for 3 seconds; the icon light will turn on. Press and hold the [Power Button] for 3 seconds again; the filter light will turn off, then the reset is finished.
