Vissani AC120-19AR Air Cooler Use and Care Guide
Item # 1001 679 038
Model # AC120-19AR
Contact Information
Questions, problems, missing parts? Before returning to the store, call Vissani Customer Service.
Hours: 8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
Phone: 1-855-VISSANI (1-855-847-7264)
Website: HOMEDEPOT.COM
Thank you for your purchase. Vissani strives to create quality products for your home.
Table of Contents
Safety Information
WARNING: Read rules for safe operation and instructions carefully.
WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- Do not leave the fan running unattended.
- Keep electrical appliances out of reach from children or infirm persons. Do not let them use the appliances without supervision.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Young children should be supervised to ensure that they do not play with the appliance.
- Unplug fan before cleaning.
- The rotor guard shall not be disassembled/opened to clean the rotor blades.
- Wipe the fan enclosure and rotor blade guard with a slightly damp cloth.
Rules for Safe Operation
- Never insert fingers, pencils, or any other object through the grill when the fan is running.
- Disconnect the fan when moving it from one location to another.
- Be sure the fan is on a stable surface when operating to avoid overturning.
- DO NOT use the fan in a window; rain may create an electrical hazard.
- Household use only.
Pre-installation
NOTE: The pictures contained in the manual are for reference only.
PACKAGE CONTENTS
Part | Description | Quantity |
---|---|---|
A | Control panel | 1 |
B | Cord wrap | 1 |
C | Wetted pad | 1 |
D | Ice crystal box | 2 |
E | Water tank | 1 |
Operation
WARNING: Please drain the water collected at the bottom of the water tank when the machine is idle. When adding water and cleaning, the power plug should be unplugged. Before starting the machine, ensure the pump module is fixed in place. If the pump module is placed randomly, the product may operate abnormally.
There are two water adding ways:
- Half of the water in the water tank should be pumped out, the water pump module should not be disassembled, and the water should be directly added.
- The water pump module should be separated, the water in the water tank should be pumped out completely, and then the water should be added or the water tank should be cleaned.
1. Opening the water tank
Flip the water tank latch up from vertical to horizontal position.
2. Pull out water tank
Pull the water tank (E) out halfway from the bottom of the machine.
3. Removing the water tank
The water tank should be separated from the pump module (including water tube) by turning the knob with a hand (90 degrees counterclockwise).
4. Adding water or cleaning the water tank
After the water tank is slowly pulled out, you can add the water or clean the water tank.
5. Closing the water tank
Flip the water tank latch down from horizontal back to vertical position.
6. Using the Ice Crystal Box
- The ice crystal box (D) can be repeatedly frozen and reused.
- To prevent damage, the ice crystal box (D) cover must not be opened.
- The ice crystal box material is environmentally friendly, non-toxic, and harmless. It can be safely placed in the refrigerator for freezing.
- The frozen ice crystal box should be used in the water tank. After the unit is turned on, the temperature at the air outlet will be lowered.
- The ice crystal box can be replaced by ice, which also has a cooling effect.
- When adding water, the water level of the water tank should not exceed the "MAX" (maximum) level. If the water level is lower than the "MIN" (minimum) level, please add water.
7. Opening the water tank
To use the ice crystal box, pull the water tank (E) out halfway from the bottom of the machine.
8. Preparing the ice crystal box
- Remove the ice crystal box from the package and put it in the refrigerator for more than 3 hours.
- Place the frozen ice crystal box (D) in the water tank (E) and add water not exceeding the "MAX" (maximum) amount indicated on the scale.
Operation (continued) - Machine Body
Control Panel
The control panel has buttons for power, oscillation, humidification, fan modes, and timer/speed adjustment.
Display Panel
The display panel shows the current settings, including fan speed and timer.
Button | Function description |
---|---|
⏻ | Power on or off. |
⟳ | Touch the swing button to start or stop oscillation. |
? | Press to start or stop humidification. In dry or hot weather, start the humidification function for a better experience. |
? | Two fan modes available: Normal (level 3, normal fan indicator light is lit up), or Natural (level 2, natural fan indicator light is lit up). |
-/+ | Press +/- to set the fan speed or timing time. Note: When timing/reservation, pressing this key reduces/increases the time by 0.5 hours for 0-3 hours, and by 1 hour for 3-10 hours. When adjusting fan speed, short press this key to increase or decrease fan speed by 1 level. |
? | To set the timer, turn the power on, press the timer button. The display will flash 3 times, indicating the timing is completed. In standby state, press this key, the display will flash. Set the time, and the display flashes 6 times, indicating the setting is completed. After pressing this key, the swing function and fan speeds can be set simultaneously. |
Cancel timed operation:
- Cancel timing when the unit is off: When timing has been set, press the timing button (the pattern on the screen will flicker). Then, long press the timing button for 2 to 6 seconds to cancel timing.
- Cancel timing when the unit is on: When timing has been set, press the timing button (the pattern on the screen will flicker). Then, press the timing button again immediately for 2 seconds to cancel timing.
Operation (continued) - Remote Control
Note: The remote controller can be used normally within 16.4 ft (5 m) and 30 degrees of the deviation angle in front of the product.
WARNING: Batteries contain heavy metals and other materials that are a threat to human health. Used and old batteries should be recovered. Use manganese or alkaline batteries of type AAA. Do not use rechargeable batteries.
WARNING: Do not mix old and new batteries. Do not mix battery types (alkaline, carbon-zinc, or rechargeable).
The remote control has buttons for:
- Turn on/off oscillation
- Turn on/adjust/turn off humidification
- Set fan type/Smart Timer/Delay start
The remote requires AAA batteries (1.5V).
Care and Cleaning
WARNING: Before cleaning the product, it must be unplugged. Wait for two minutes after turning off the product before cleaning.
- Do not use abrasive tools or solvents that may damage the surface of the product. Clean the product with dish soap and dry it with a cloth promptly.
- Do not directly wash the main body of the product with water. Clean removable parts, such as the wetted pad component, with a soft brush and ensure these parts are dried before reinstallation.
- Do not disassemble the product for modification. Regular inspection and cleaning are recommended to extend its lifespan.
Wetted pad component disassembly guide
- Remove the wetted pad bracket.
- Unscrew the bottom buckle and remove the wetted pad.
- Remove the wetted pad and dust net for cleaning.
- Install the wetted pad bracket.
Water replacement
Stop humidifying for 2 minutes until the water in the pipeline and wetted pad flows back to the water tank before replacing the water.
Power cord storage
- Push both ends of the wire hook to keep it open.
- Wind the power cord around the hook.