Welcome
Thank you for choosing Vissani. We appreciate your trust and confidence in our products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Questions, problems, or missing parts? Before returning to the store, please call Vissani Customer Service:
8 a.m. - 7 p.m., EST, Monday-Friday | 9 a.m. - 6 p.m., EST, Saturday
Phone: 1-855-VISSANI (1-855-847-7264)
Website: HOMEDEPOT.COM
Safety Information
Important Safeguards:
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- Do not leave the fan running unattended.
- Keep electrical appliances out of reach from children or infirm persons. Do not let them use the appliances without supervision.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Young children should be supervised to ensure that they do not play with the appliance.
- Unplug fan before cleaning.
- The rotor guard shall not be disassembled/opened to clean the rotor blades.
- Wipe the fan enclosure and rotor blade guard with a slightly damp cloth.
CAUTION: Read rules for safe operation and instructions carefully. ⚠️
WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. ❗
Rules for Safe Operation
- Never insert fingers, pencils, or any other object through the grill when the fan is running.
- Disconnect the fan when moving it from one location to another.
- Be sure the fan is on a stable surface when operating to avoid overturning.
- DO NOT use the fan in a window; rain may create an electrical hazard.
- For household use only.
Pre-installation
NOTE: The pictures contained in the manual are for reference only.
Package Contents
| Part | Description | Quantity |
|---|---|---|
| A | Control panel | 1 |
| B | Cord wrap | 1 |
| C | Wetted pad | 1 |
| D | Ice crystal box | 2 |
| E | Water tank | 1 |
Diagram Description: An exploded view shows the air cooler components: A (Control panel), B (Cord wrap), C (Wetted pad), D (Ice crystal box), and E (Water tank).
Operation
WARNING: Please drain the water collected at the bottom of the water tank when the machine is idle. When adding water and cleaning, the power plug should be unplugged. Before starting the machine, be sure that the pump module is fixed in place. If the pump module is placed at random, the product may operate abnormally. ❗
There are two water adding ways:
- The half of the water in the water tank should be pumped out, the water pump module should not be disassembled, and the water should be directly added.
- The water pump module should be separated, the water in the water tank should be pumped out completely, and then the water should be added or the water tank should be cleaned.
1. Opening the Water Tank
Flip the water tank latch up from vertical to horizontal position. [Diagram shows latch flipping]
2. Pull Out Water Tank
Pull the water tank (E) out halfway from the bottom of the machine. [Diagram shows tank being pulled out]
3. Removing the Water Tank
The water tank should be separated from the pump module (including water tube) by turning the knob with a hand (90 degrees counterclockwise). [Diagram shows knob turning]
4. Adding Water or Cleaning the Water Tank
After the water tank is slowly pulled out, you can add the water or clean the water tank. [Diagram shows adding water]
5. Closing the Water Tank
Flip the water tank latch down from horizontal back to vertical position. [Diagram shows latch flipping back]
6. Using the Ice Crystal Box
The ice crystal box (D) can be repeatedly frozen and reused.
- To prevent damage, the ice crystal box (D) cover must not be opened.
- The ice crystal box material is environmentally friendly, non-toxic and harmless. It can be safely placed in the refrigerator for freezing.
- The frozen ice crystal box should be used in the water tank. After the unit is turned on, the temperature at the air outlet will be lowered.
- The ice crystal box can be replaced by ice, which also has a cooling effect.
- When adding water, the water level of the water tank should not exceed the "MAX" (maximum) level. If the water level is lower than the "MIN" (minimum) level, please add water.
Diagram Description: Shows the ice crystal box (D).
7. Opening the Water Tank (for Ice Crystal Box)
To use the ice crystal box, pull the water tank (E) out halfway from the bottom of the machine. [Diagram shows tank being pulled out]
8. Preparing the Ice Crystal Box
- Remove the ice crystal box from the package and put it in the refrigerator for more than 3 hours.
- Place the frozen ice crystal box (D) in the water tank (E) and add water not exceeding the "MAX" (maximum) amount indicated on the scale. [Diagram shows adding water to tank with ice crystal box]
Operation - Machine Body Controls
Diagram Description: Shows the Control Panel with buttons and the Display Panel.
| Button | Function Description |
|---|---|
| [power symbol] | Power on or off. |
| [oscillation symbol] | Touch the swing button to start or stop oscillation. |
| [droplet symbol] | Press to start or stop humidification. In dry or hot weather, start the humidification function for a better experience. |
| [fan symbol] | Two fan modes available: Normal (level 3, normal fan indicator light is lit up), or Natural (level 2, natural fan indicator light is lit up). |
| [plus/minus symbols] | Press +/- to set the fan speed or timing time
|
| [clock symbol] | To set the timer: Turn the power on, press the timer button; the display flashes 3 times, indicating the timing is completed. In standby state, press this key, the display flashes. Set the time, and the display flashes 6 times, indicating the setting is completed. After pressing this key, oscillation function and fan speeds can be set simultaneously. Cancel Timed Operation:
|
Operation - Remote Control
Note: The remote controller can be used normally within 16.4 ft (5 m) and 30 degrees of deviation angle in front of the product.
Battery Information:
- Batteries contain heavy metals and are a threat to human health. Used and old batteries should be recovered.
- Use manganese or alkaline batteries of type AAA. Do not use rechargeable batteries.
WARNING: Do not mix old and new batteries. Do not mix battery types (alkaline, carbon-zinc, rechargeable). ❗
Diagram Description: Shows remote control buttons for oscillation, humidification, fan type/timer, and battery compartment.
Remote Control Functions:
- Activation/deactivation of oscillation
- Activation/adjustment/stop of humidification
- Set fan type / Intelligent
- Timer / Delay start
Diagram Description: Shows AAA 1.5V battery.
Care and Cleaning
- Be sure to unplug the appliance from the electrical supply source before cleaning.
- Plastic parts should be cleaned with mild soap and a damp cloth or sponge. Thoroughly remove soap film with clean water.
- Be sure not to let water or other liquid enter inside of the appliance.
