Outsunny 84C-204V04 Gazebo Assembly Instructions
This document provides a comprehensive guide for assembling your Outsunny 84C-204V04 Gazebo. Please read all instructions carefully before beginning assembly. Estimated assembly time is 3 hours.
Tools Recommended
While specific tools are not listed, it is recommended to have basic tools available for assembly.
Part List - Box A
- A: 4x
- C: 2x
- C1: 2x
- C2: 2x
- C3: 2x
- D: 2x
- D1: 2x
- D2: 2x
- D3: 2x
- Ea: 4x
- E1: 4x
- F1: 4x
- F2: 4x
- G1: 2x
- G2: 2x
- G3: 1x
- G4: 2x
Part List - Continued
- Eb: 4x
- H: 4x
- H1: 4x
- J: 4x
- L: 1x
- M: 1x
- N: 8x
- P: 4x
- U: 104x
- V: 4x
- W: 4x
- W1: 4x
- Z: 56x
- Z1: 16x
- 16: 12x
- 17: 4x
- 18: 4x
Part List - Box C
- B: 2x
- B1: 2x
- B2: 2x
- B3: 2x
Part List - Continued
- T: 4x
- T1: 4x
- K: 4x
- K1: 4x
- Y: 104x
- V1: 2x
- V2: 2x
- V3: 2x
Hardware List
- M6x16 (1): 224x
- M6x23 (2): 64x
- M6x25 (3): 4x
- ST4.8*12 (4): 24x
- M6x15 (5): 16x
- M6x10 (9): 8x
- M6x42 (6): 8x
- M6x47 (7): 28x
- 10: 1x
- 8: 12x
- 11: 1x
- 12: 1x
- 13: 2x
Part List - Box D
- Q1: 2x
- Q2: 2x
- Q3: 2x
- Q4: 2x
- Q5: 2x
- Q6: 2x
- S: 2x
- Sa: 2x
- S1: 2x
- S2: 2x
- S3: 2x
- S4: 2x
- R1: 2x
- R2: 2x
- R3: 2x
- R4: 2x
- R5: 2x
- R6: 2x
- R7: 2x
- R8: 2x
Important Notes
Multilingual Note:
- English: Do not confuse similar screws.
- French: Ne pas confondre des vis similaires.
- Spanish: No confunda tornillos similares.
- Portuguese: Não confundir parafusos semelhantes.
- German: Verwechseln Sie ähnliche Schrauben nicht.
- Italian: Non confondere le viti simili.
General Note: Please ensure all parts are present and correctly identified before starting assembly. Keep small parts away from children.
Assembly Steps
The following steps detail the assembly process. Refer to the part numbers and quantities listed above.
- Step 01: Begin by assembling the base frame components. Ensure all connections are secure.
- Step 02: Attach the vertical support poles to the base frame.
- Step 03: Assemble and attach the roof support structure.
- Step 04: Install the roof panels.
- Step 05: Attach the side curtains and netting.
- Step 06: Secure the gazebo to the ground using the provided stakes or appropriate anchoring method.
- Step 07: Final checks and tightening of all screws and bolts.
- Step 08: Ensure all parts Ea (4x) and Eb (4x) are correctly positioned with the corresponding screws (16, 17, 18).
- Step 09: Continue attaching remaining frame components as per the diagrams.
- Step 10: Install any decorative or functional elements.
- Step 11: Double-check all connections, particularly where parts Ea are used.
- Step 12: Ensure the structure is stable and all parts are aligned.
- Step 13: Final inspection of the assembled gazebo.
- Step 14: Confirm all screws and fasteners are tightened.
- Step 15: Ensure all panels and fabric components are correctly attached.
- Step 16: Final check of the overall structure's integrity.
- Step 17: Confirm all parts are used and correctly installed.
- Step 18: Assembly is complete.
Done
