Outsunny 84C-431V00 Pop-Up Gazebo Assembly Instructions

Important Information

Thank you for purchasing this Outsunny product. Please read all instructions carefully before use to ensure proper assembly and enjoyment of your gazebo. If you have any questions, please contact the customer care center.

Safety Warnings

1. Find a flat and stable surface large enough to set up the folding pavilion. Carefully remove the tent frame from the bag and place it on a dry surface (sand, grass, or firm surface).
2. Follow these instructions carefully to avoid getting your hands and fingers caught in the moving parts of the frame when opening and closing it. At least two people are needed for safe assembly and disassembly. Do not attempt to set up the tent alone, as pulling on one side can overload the tent legs and cause unnecessary damage. To avoid damage, the tent must be pulled out in tandem.
3. In windy conditions, secure the tent using the ropes attached to each side of the canopy. Attach the ropes to the pegs at a 30-degree angle and anchor them to the ground with a hammer. If the canopy is placed on a hard surface, secure the 4 sides with bricks or sandbags.
4. Do not set up the pavilion in windy weather conditions, as this can lead to injuries and/or damage to your tent.
5. Do not use chemical additives to clean the roofs and side walls. The water temperature should not exceed 30°C.
6. Ensure the folding tent is packed dry and stored upright in the provided bag in a dry place. A damp tent can develop mold stains.
7. No liability is accepted for damage caused by improper storage or cleaning.
8. Take appropriate actions as heavy rain, wind, and snow can damage the tent. If necessary, disassemble and store the tent for later use.
9. In snowy conditions, do not allow the snow thickness on the roof to exceed 5cm. Clear the snow as soon as possible for your safety.

Parts List

• Frame (A) x 1
• Canopy (B) x 1
• Side Walls with Windows (D) x 4
• Ropes (G) x 6
• Tent Pegs (H) x 6

Assembly Steps

1. Step 01: Unfold the frame (A) and extend it with the help of another person.
2. Step 02: Continue extending the frame until it is fully open. Ensure all legs are extended evenly.
3. Step 03: The frame is now fully assembled.
4. Step 04: Unfold the canopy (B). Attach the canopy to the frame by securing the Velcro straps around the frame poles. Ensure the canopy is taut.
5. Step 05: Secure the canopy further by attaching the provided straps to the designated points on the frame. Insert pegs (H) into the frame legs for added stability.
6. Step 06: Use the hammer to secure the tent pegs (H) into the ground at a 30-degree angle, attaching the ropes (G) to them.
7. Step 07: Attach the ropes (G) to the canopy corners and secure them to the ground with pegs (H).
8. Step 08: Attach the side walls (D) to the gazebo frame using the Velcro straps. Ensure all side walls are securely fastened.
9. Step 09: Secure the side walls to the ground using the ropes (G) and pegs (H) as shown in the diagram.

Contact Information