PROAIM Flyking Mitchell Slider (SL-FLKM)
Assembly Manual
Available Sizes: 2ft, 3ft, 4ft and 6ft
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
- Flyking Mitchell Mount Camera Slider: A long, flat track with two parallel rails and mounting points.
- Crossbar: Two metal bars designed to attach to the slider.
- Flight Case: A sturdy, blue protective case.
- Feet: Four adjustable cylindrical supports.
Flyking Slider on Mitchell Stand - Setup
- Mount the Flyking Slider on the Mitchell Tripod Stand (Not included). Tighten the Cardellini headlock from below for a secure setup.
- Loosen the knob to move the top platform and tighten it to lock the top platform when you need static shots.
- For 360° Rotation of Slider, loosen the black knob as shown in the image.
Textual description of image: A professional cinema camera rig, including a camera, lens, and accessories, mounted on a tripod with the PROAIM Flyking Mitchell Slider positioned between the tripod head and the camera. The slider is on a tripod with a Mitchell mount base.
Now affix your Mitchell Mount Fluid Head (Not Included) on the Slider for mounting the camera setup, and secure it properly.
Textual description of image: Close-up of the slider's top platform with a red locking knob. Another image shows the slider being attached to a tripod head. A third image shows the slider with a camera mounted on a tripod.
YOUR PROAIM FLYKING MITCHELL CAMERA SLIDER ALL DRESSED UP AND READY TO GO!
Flyking Slider on any Tripod Stand - Setup
NOTE: Mount the Slider on any stand with a 3/8"-16 thread.
- Attach the Quick Release Plate of the Tripod Head with a 3/8"-16 thread, onto the end foots of the Slider.
- Now mount the Slider on the Tripod Head and lock it properly to ensure a secure connection.
Textual description of image: A camera slider mounted on a tripod head, which is itself mounted on a tripod. The slider is attached to the tripod head via a quick-release plate.
QUICK TRIPOD ATTACHMENT SAVES PRODUCTION TIME
Flyking Slider on C-Stand - Setup
- Directly mount the Slider onto a C-Stand (Not Included), without any Quick Release plate.
Textual description of image: A camera slider mounted directly onto a C-stand arm.
End Feet Setup
- Attach each of the two Cross Bars on each side of the Slider and tighten them accurately with the allen key.
- Insert the four End Feet on all the corners of the Crossbars and tighten the knob to secure them.
- Loosen the red knob at the End Feet to adjust the height, according to your setup requirement.
Textual description of image: Close-up shots showing the attachment of crossbars to the slider, insertion of end feet into the crossbars, and adjustment of the red knob on the end feet.
Textual description of image: A complete PROAIM Flyking Mitchell Camera Slider setup with a professional cinema camera mounted on top, resting on adjustable feet. This configuration is presented as 'ALL DRESSED UP AND READY TO GO!' and is noted as 'SHOWN WITH OPTIONAL ACCESSORIES'.
Warranty
PROAIM offers a one-year warranty for its products from the date of purchase. Within this period, products will be repaired without charge for labor or parts. The warranty does not cover transportation costs or damage resulting from misuse or accidental damage. Warranty repairs are subject to inspection and evaluation.
Liability
PROAIM is not liable for damage caused by products not supplied by the company, mishandling during transit, accidents, misuse, neglect, lack of care of the product, or service performed by anyone other than the company.
Contact Us
In case of any dissatisfaction, please contact PROAIM immediately. The company promises utmost support and care until the product is used.
