DoorBird Connect Animus
Technology meets Design.
System Requirements
- DoorBird IP Video Door Station D10x/D11x/D20x/D21x-Series
- Animus Heart
Additional Information
The following guide will take you through the steps of setting up a DoorBird IP Video Door Station in connection with an Animus Heart.
Please make sure that your DoorBird is online, using this service: https://www.doorbird.com/checkonline
The local IP address of your DoorBird is available from the same page.
1. Setting Up the Animus App
- Open the Animus app and on the "Devices" screen, tap on the [+] symbol in the upper right corner.
- From the following screen, select "IP Cameras".
- Choose “DoorBird” for the type of IP camera.
- Follow the instructions and continue with the setup wizard until completed.
Support
For questions and problems regarding the product „Animus“ please contact the manufacturer online: https://animushome.com/en/support
For questions and problems regarding our devices (DoorBird IP Video Door Station) please use the contact form to get in touch with our technical support: https://www.doorbird.com/contact