LUTEC Security Area Light Installation Guide
Model #7635402012/7635402053 - WET LOCATION
Please read and understand this entire manual before attempting to assemble, operate, or install the product.
WARNING
- Consult a qualified electrician if you are not certain about the installation process. Always install wiring connections in accordance with the local code, ordinances, and the National Electric Code.
- Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
- Do not attempt to install this product while it is plugged in.
- Do not connect this light fixture to a dimmer switch or timer.
- This light fixture is designed to fit standard junction boxes as defined by the National Electrical Code.
Installation Steps
- Step 1: Turn off power at the switch. The diagram shows a hand flipping a switch to the 'OFF' position.
- Step 2: Prepare the mounting bracket. The diagram shows the mounting bracket and screws.
- Step 3: Connect the wires. The diagram shows the light fixture with wires labeled: Black-to-Black, White-to-White, Green-to-Green.
- Step 4: Mount the light fixture. The diagram shows the light fixture being attached to the mounting bracket.
- Step 5: Secure the fixture. The diagram shows screws being used to secure the fixture.
- Step 6: Turn on power at the switch. The diagram shows a hand flipping a switch to the 'ON' position.
Service Information
LUTEC USA LLC:
149B Houston Rd Troutman NC 28166
Ningbo UTEC Electric Co.,LTD
CN8, Far East Industry Park, Yuyao, China
Website: www.lutec.com
Email: service@lutec.com
For assistance, please call our Customer Service line at 877-714-8669, Monday - Friday, 9 a.m. to 5 p.m. EST.
LUTEC | Home
