LUTEC 6941502330 Cuba Smart Solar Motion Sensor Outdoor LED Light

Welcome

Thank you for your purchase of the LUTEC Cuba smart solar light.

Package Contents

• Luminaire: 1 pc
• Bracket: 1 pc
• Screws: 2 pcs
• Cable: 1 pc

Technical Data

The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.

Safety Instructions

You can consult the full Safety Instructions on our website: www.lutec.com/service/safetyinstructions.

• The battery must be removed from the luminaire before it is scrapped. The battery is to be disposed of safely.
• The operating time depends on the charging performance in daytime, which can be affected by environmental conditions (e.g., weather, location).
• Keep batteries out of the reach of children. Do not leave batteries lying around.
• There is a risk of children or animals swallowing them. Consult a doctor immediately if a battery is swallowed.
• Use only rechargeable batteries of the recommended type. Other rechargeable or single-use batteries could explode during charging.
• Do not short-circuit rechargeable batteries. Otherwise, they may overheat, become a fire hazard, or explode.
• Never throw rechargeable batteries into fire or water.

Installation

1. Step 1

   Mount bracket B [Part B] to the wall using appropriate screws (not provided). Ensure the bracket is level. [Diagram shows bracket B being attached to a wall with screws.]

2. Step 2

   Connect cable A [Part A] to the luminaire. [Diagram shows cable A being connected to the luminaire.]

3. Step 3

   Slide the luminaire onto the mounted bracket B. [Diagram shows the luminaire being mounted onto the bracket.]

4. Step 4

   Secure the luminaire to the bracket using the provided screw (not provided). [Diagram shows a screw securing the luminaire to the bracket.]

5. Step 5

   Position the solar panel to receive maximum sunlight. [Diagram shows the solar panel being positioned.]

6. Step 6

   Attach the luminaire to the bracket. [Diagram shows the luminaire being attached to the bracket.]

7. Step 7

   The installed luminaire. [Diagram shows the final assembled unit.]

First Use

It is recommended to put the solar panel in the sun for 8 hours to charge the battery. [Diagram shows the solar panel oriented towards the sun.]

LUTEC connect App Control

Download the free LUTEC connect App to control your smart lighting.

[Diagram shows a smartphone displaying app store icons for downloading the LUTEC connect app.]

Sign Up & Log In

1. Step 1: Register a new account. [Icon of a user/person.]
2. Step 2: Log in to your account. [Icon of a key/lock.]
3. Step 3: Navigate to the Home interface. [Icon of a house/home.]
4. Step 4: Enable automatic device detection. [Icon of a magnifying glass/radar.]
5. Step 5: Select 'Add new device'. [Icon of a plus sign.]
6. Step 6: Initiate Bluetooth search and connect to the device. [Icon of Bluetooth waves.]
7. Step 7: Select the device from the list to add. [Icon of a list/device selection.]
8. Step 8: Confirm your selection. [Icon of a checkmark.]
9. Step 9: The device is now ready for use. [Icon of a checkmark/ready symbol.]

Smart Speaker Integration

For additional voice control, connect with an Access Box (sold separately). Please first connect with the Access Box.

Personal Settings & Support

Access personal settings, tutorials, and help through the LUTEC connect App.

Bluetooth Mesh Technology

Bluetooth mesh technology, the global standard for simple, secure wireless connectivity, now supports mesh networking. The new mesh capability enables many-to-many device communications and is optimized for creating mid to large-scale device networks. Bluetooth mesh allows you to solve more complex range and distance problems.

Function

At dusk, the motion sensor becomes active. Any movement within the detection reach will switch on the light. The light stays on for 30 seconds. At dawn, the motion sensor will deactivate. [Diagram illustrates the motion sensor function: movement detected triggers the light for 30 seconds, then deactivates at dawn.]

Battery Change

1. Step 1

   Use a screwdriver to loosen the screws on the battery compartment cover. [Diagram shows a screwdriver.]

2. Step 2

   Remove the battery compartment cover. [Diagram shows the cover being removed.]

3. Step 3

   Carefully remove the old battery. [Diagram shows the battery being removed.]

4. Step 4

   Insert the new 3.7V 2200mAh Li-ion battery, ensuring correct polarity. [Diagram shows a new battery being inserted.]

5. Step 5

   Replace the battery compartment cover and secure it with screws. [Diagram shows the cover being replaced.]

6. Step 6

   Battery replacement complete. [Diagram shows the final state.]

Recycling Information

This device and its batteries are recyclable. Please dispose of them responsibly at designated collection points or recycling facilities.