LUTEC Qubo Wall Light User Manual and Installation Guide
Model: 5195-401118
Welcome
Hello, nice to meet you. We are LUTEC. Thank you for your purchase.
LUTEC is dedicated to providing high-quality lighting solutions.
Technical Data
Supply Voltage: 220-240 V~, 50/60 Hz
Bulb Type: LED (9.5W)
Light Source: The light source is only exchangeable by a professional.
Certifications: CE, IP54 (Splash-proof)
Electrical Class: Class I product, must be connected to earth.
Energy Efficiency: This product contains a light source of energy efficiency class <E>.
Compliance: Fully compliant to the ERP Regulation (EU) 2019/2020 and Amending Regulation (EU) 2021/341.
Disposal: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.
Safety Instructions
You can consult the full Safety Instructions on the LUTEC website: www.lutec.com/service/safetyinstructions.
Please scan the QR code provided in the manual or packaging for convenience.
[QR Code Placeholder]
Installation Guide
Before installation, ensure the power is switched OFF [Power Off].
Identify all parts included: the main fixture, mounting bracket, screws (x2), and wall plugs (x2). Ensure you have the necessary tools: a drill with a 6mm drill bit, screwdrivers (Phillips and flathead), and a pencil.
[Inspection/Check Parts] [Tools Required]
Hold the mounting bracket against the wall at the desired location. Mark the screw hole positions using a pencil. The recommended spacing is approximately 80mm horizontally and 84mm vertically.
[Marking] [Dimensions: 80mm x 84mm]
Drill holes at the marked positions using a 6mm drill bit. Insert the wall plugs into the drilled holes.
[Drill ∅ 6mm] [Insert Wall Plugs]
Secure the mounting bracket to the wall using the provided screws. Ensure it is firmly attached.
[Attach Bracket] [Screws] [Screwdriver]
Ensure the power is OFF [Power Off]. Connect the wires from the fixture to your mains supply. Typically, this involves connecting the Live (L) wire, Neutral (N) wire, and Earth wire. Refer to the wiring diagram for specific connections.
Wiring Diagram:
- Connect the fixture's Live wire to the mains Live terminal [L].
- Connect the fixture's Neutral wire to the mains Neutral terminal [N].
- Connect the fixture's Earth wire to the mains Earth terminal.
[Live Wire Connection] [Neutral Wire Connection] [Earth Wire Connection]
Carefully align the fixture with the mounting bracket. Push the fixture onto the bracket, ensuring it is seated correctly. The fixture should be oriented "UP" as indicated.
[Mount Fixture] [Orientation: UP]
Secure the fixture to the bracket if required (e.g., with a locking screw). Once the fixture is securely mounted and wired, switch the power ON [Power On].
Warranty Conditions
All LUTEC products meet the highest quality requirements and have been subjected to strict quality control. The product is designed, produced, and tested in accordance with International & European safety standards.
LUTEC Europe NV grants an operational warranty under the following terms and conditions:
Warranty Period: 5 years (2 years for Solar Energy ranges) from the date of purchase. An additional 15-year anti-corrosion guarantee is offered on galvanized and resin outdoor luminaires.
Applicability: The guarantee applies to LUTEC indoor & outdoor lighting purchased within the European Union and/or Switzerland, provided the packaging is appropriately labelled. Excluded are replaceable bulbs, batteries, starters, and other wear & tear parts.
Coverage: Products are guaranteed against material, manufacturing, or design faults, considering the scientific and technical state of the art at the time of manufacture.
LUTEC's Obligation: LUTEC Europe may repair or replace the product, or refund the purchase price. If the product is no longer manufactured, a similar product will be supplied.
Exclusions: The warranty does not cover assembly/disassembly costs, transport costs, postage fees, consequential damages, loss of profit, wasted expenditure, or transport damage/loss.
Warranty Validity Conditions:
- Products must be used as intended.
- No unauthorized adjustments or modifications by third parties.
- Products must be maintained and cared for as per the operating manual.
- Lights must be mounted and installed according to LUTEC's installation instructions.
- Replaceable bulbs must comply with applicable standards and be approved for intended use.
- Product surfaces must not show signs of chemical or physical damage from improper handling.
Making a Claim: Contact your local dealer or LUTEC Europe directly. Notify them of any defect within 30 days of discovery. Submit proof of purchase, including date and model number.
Statutory Rights: Statutory warranty rights remain unaffected and apply in addition to this guarantee.
Guarantor Address: LUTEC Europe NV, Herentalsebaan 425, B-2160 Wommelgem, Belgium.
Contact: Phone: +32 (0)3 284 51 62, Email: info@lutec-europe.com, Website: www.lutec.com | www.lutec.com/services/global-network
Company Information
LUTEC Europe NV
Herentalsebaan 425
B-2160 Wommelgem
Belgium
LUTEC UK Ltd
110 Brooker Road
EN9 1JH Waltham Abbey
United Kingdom
LUTEC China Head Office
CN8, Far-East Industry Park
Yuyao, Zhejiang
China
Designed in Europe, Made in China.
