LYNGÖR Bed Base Assembly Instructions
IKEA Design and Quality
Important Information & Tools
Before you begin assembly, please review the following:
- Tools Required: A screwdriver is needed. [?]
- Handling Parts: Ensure parts are handled correctly to avoid damage. [❌]
- Assembly Surface: Assemble on a soft surface, like a rug, to prevent damage to the product. [❌]
- Assistance: If you encounter difficulties or have questions, contact IKEA for support. [?]
Parts List
| Part Description | Quantity | Part Number |
|---|---|---|
| Screw | 4x | 192494 |
| Metal Bracket (U-shaped) | 4x | 10096501 |
| Wooden Dowel | 10x | 130884 |
| Screw | 10x | 130886 |
| Allen Key | 1x | 100002 |
| Metal Bracket (L-shaped) | 2x | 10096290 |
| Metal Bracket (Angled) | 2x | 10040438 |
| Metal Bracket (Flat base with posts) | 4x | 10040405 |
| Central Support Beam Component | 4x | 10040409 |
Assembly Steps
-
Step 1: Prepare side panels and attach rails.
Insert wooden dowels (130884) into the pre-drilled holes on the side panels. Attach the metal brackets (10096501) to the side panels using screws (192494).
-
Step 2: Prepare main frame components.
Insert wooden dowels (130884) into the designated holes on the main frame pieces. Screw in screws (130886) as indicated.
-
Step 3: Secure rails to the main frame.
Attach the metal rails to the main frame using screws (130886).
-
Step 4: Attach additional brackets.
Secure metal brackets (10040438) to the frame using the provided hardware.
-
Step 5: Attach more brackets.
Attach metal brackets (10040405) to the frame.
-
Step 6: Secure brackets.
Fasten the metal brackets attached in Step 5 using screws (130884).
-
Step 7: Install central support.
Attach the central support beam component (10040409) to the frame.
-
Step 8: Attach end pieces.
Connect the end pieces to the main frame structure.
-
Step 9: Complete frame assembly.
Finalize the assembly of the main bed frame.
-
Step 10: Place and secure mattress base.
Carefully place the slatted mattress base onto the assembled frame. Secure it in place using screws (192494) and brackets (100002).
-
Step 11: Attach support piece.
Attach the additional support piece to the frame as shown.
-
Step 12: Attach corner and end brackets.
Secure the corner brackets (10096501) and end brackets (10096290) to the frame.
-
Step 13: Insert slatted mattress base.
Insert the slatted mattress base into the frame, ensuring it sits correctly.
